The UAEs Hope spacecraft remains healthy and is on the way to the Red Planet, according to a live tracking website by US space agency Nasa.

Communication with the Mars weather satellite, which lifted-off from Japan on July 20, is possible through massive antennas by Nasas Deep Space Network, located in three countries to provide a 24-hour coverage of the craft.

The spacecraft is expected to arrive to its desired Martian orbit in February and will remain there for two years, capturing data so scientists can study the dynamic weather conditions of the planet.

During this mission, the satellite will be sending data to one of the antennas in Canberra in Australia, Madrid in Spain or Goldstone, California.

The data, or telemetry, is then sent to Emirati engineers at the mission control centre at Dubais Mohammed bin Rashid Space Centre.

However, anyone can track the status of deep space missions that use Nasas network.

The National explains how you can follow UAEs Hope probes journey live.

A Nasa website shows all deep space missions, which use the Deep Space Network, sending telemetry in real time.

The live feed helps show the status of the spacecraft, including its range, frequency, and power levels of radio transmissions, as well as the speed in which the craft is sending data.

Currently, there are 10 active deep space missions that the network is tracking, including the Emirates Mars Mission.

The steerable and high-gain antennas were strategically installed in three countries so Nasa can stay in contact with a spacecraft around the clock as the Earth rotates.

As of late Sunday, 11.30pm, UAEs spacecraft was sending telemetry to the antenna in Canberra, Australia. An hour later, Madrid was looking after it.

The satellite remains in good health and was sending data at a healthy rate and frequency.

The range figure, which tells the distance travelled so far, is not available while it is for the nine other missions the network is tracking. This could be because the Hope Mars Mission team requested Nasa to hide that figure publicly.

Within two days of the launch, the probe had travelled a million kilometres from Earth. By July 27, a distance of 2.47million kms was travelled.

At that rate, it is likely the spacecraft has already voyaged more than seven million kms. The remaining cruising distance, in this case, would be 486.5 million kms.

In the live feed, the public can see if and when a spacecraft is sending data, which antennas are communicating with the crafts, as well as the speed, power and rate being used to send and receive telemetry.

However, the network does more behind the scenes, such as acquiring, processing, decoding and distributing data to mission control rooms in different parts of the world.

Mission operations team, including the UAE Mars Mission engineers, use the Deep Space Network Command System to control the spacecrafts activities.

During an exclusive visit to the ground control room last month, The National learnt that Emirati engineers already have a series of commands prepared for the Hope probe during its 200-day journey to Mars.

They are working in 24-hour shifts at the mission control room until August 20 to ensure the spacecraft is cruising in the correct route.

The long-distance calls are smooth so far, but as the Hope probe travels further away from Earth, there will be a communication delay between it and the ground control team.

The signals from the spacecraft are received within seconds as of now, however, that time frame will be increased to minutes in the next few weeks.

When it reaches Mars, there will be at least a 15-minute delay.

If you dont want to wait until the Hope probe becomes live on the website next, there are a few Twitter accounts that post each time the spacecraft sends telemetry.

One of the most active ones is the Dsn_Status account, an unofficial version of the network.

Updated: August 10, 2020 03:01 PM

Read the rest here:

UAE Mars Mission: how to track Hope probe in real time - The National