Too often the concept of a circular economy is muddled up with some kind of advanced recycling process that would mean keeping our industrial system as it is and preserving a growing consumption model.
This idea is based on a belief that recycling will take care of everything.
One of the most startling examples of this is the part of the European Union's Circular Economy Action Plan which aims to increase recycling rates: up to 70% of all packaging waste by 2030 and 65% of all municipal waste by 2035. In a properly built circular economy, one should rather focus on avoiding the recycling stage at all costs. It may sound straightforward, but preventing waste from being created in the first place is the only realistic strategy.
While we obviously need to continue recycling for quite some time, putting the emphasis on genuine circular innovations that is, moving us away from a waste-based model should be our sole objective.
In a linear economy, we do not account for the side-effects generated by a product once sold to an end customer. The aim is to sell a maximum number of products at minimal cost. Continuous pressure to reduce costs leads to the creation of many of these side-effects called externalities by economists. The higher a company's rate of production and the higher its efficiency, the more successful it will be at selling its goods in a fiercely competitive environment.
This worked well in the 20th century when resources were easily available and raw material prices kept decreasing. Waste, as an economic externality, was not the producers' responsibility. Managing waste cycles, dumping it out of sight or, at best, recycling it but only when it was cost-effective were under the control of our national institutions.
Visionary manufacturers, who understand the upcoming challenges of increasing their economic resilience, know better: a product that is returned for repair will cost less to fix and sell again, than manufacturing it from scratch.
In our current model, we extract resources, transform them into products, and consume or use them, prior to disposing of them. Recycling only starts at the throwing-away stage: this is a process that is not made to preserve or increase value nor to enhance materials.
We need to understand that recycling is not an effective strategy for dealing with unused resource volumes in a growth model. We will find ourselves in a never-ending pursuit of continuously generated waste, rather than seeing the avoidance of waste as a path to beneficial innovations on many levels.
Of course, it is easier to think about recycling. This avoids changing the whole of our volume-based production model. But in a world where we have to shift our consumption patterns and use less energy, recycling no longer has all the answers.
Since we cannot stop the volume of waste overnight, investments in the recycling industry are needed. But truly meaningful investment in developing a circular economy takes place outside of the recycling space. Indeed, the more we recycle and the more we finance recycling factories, the more we stay 'linear'. We mistakenly believe this is the best route to solve our problems - but by staying in a recycling-based economy, we will delay the transition to an advanced circular economy.
In a circular economy, resources do not end up as recyclables since products are made to last several lifecycles. Products' lifespans are extended via maintain, repair, redistribute, refurbishment and/or re-manufacture loops, thus they never end up in the low-value, high-need-for-energy loop: recycling.
We live in a world in dire need of disruptive innovations. Closing loops next to where customers live while avoiding waste is a short and longer-term win-win for any leading re-manufacturer. Short-term because you are in direct contact with your customers, and taking back a product that needs maintenance is an opportunity to better understand their needs and help them with additional services. Long-term because you will lower your exposure to future financial risks. Any of the feedback loops that exist prior to the recycling loop are an opportunity to take back control over your stock of resources taking control away from the raw material markets, which may become highly volatile. Increased interactions with your customers, both commercial and financial, and an in-depth understanding of their needs, would increase customer loyalty and a business' overall resilience.
Re-using, re-distributing and/or remanufacturing strategies are the preferred approaches in a circular economy, as they are based on parts durability. Caring for and preserving the value of product components increases corporate economic resilience, while diminishing external market risks. Whether you are acting in a highly advanced or a developing economy, these strategies make crystal-clear sense: they are less costly in the long-run because repairing a product made to last is always less expensive than producing it from scratch.
Following this approach, we must move away from activities that devalue the material, such as recycling, and instead invest in those activities that preserve it: reuse and remanufacture. These two are especially important since they create many more secure jobs. Walter R. Stahel, the godfather of the modern circular economy, introduced the metric of labor input-per-weight ratio (man-hour-per-kg, or mh/kg) to measure job creation in relation to resource consumption. He found that the ratio of mh/kg when building a remanufactured engine from used resources compared to making the same engine from virgin materials is 270:1. The impact on employment is huge.
The re-localization and the re-sizing of activities closer to customers become critical. Production sites should migrate from a highly centralized global hub to units designed to fulfill local needs. In developed markets, a possible plan could be to develop strategic partnerships with local service providers, who can provide the infrastructure. In emerging markets, where there is often an urgent need for jobs, leapfrogging straight into a national re-manufacturing strategy is the way forward. Becoming the next 'world factory' hub is an obsolete vision today.
One way to start thinking like a leader in the next economy while creating jobs could be in order of priority:
All of the above make sense in a world where planetary limits have already hit most economies.
Adopting a circular strategy by avoiding reliance on recycling is the way forward.
This is about genuine innovation derived from genuine leadership.
Reprinted with permission of the World Economic Forum. Read the original article.
From Your Site Articles
Related Articles Around the Web
See the original post here:
To build a circular economy, we need to put recycling in the bin - Big Think
- Recruitment - Wikipedia - January 27th, 2017 [January 27th, 2017]
- Resource-based economy and pay-it-forward | The Moneyless ... - January 30th, 2017 [January 30th, 2017]
- A Resource Based Economy - worldsocialism.org - January 30th, 2017 [January 30th, 2017]
- Trump's Flawed Logic Regarding US-Mexico Relations - Fair Observer - February 7th, 2017 [February 7th, 2017]
- Economic freedom achievable through knowledge based economy, innovative technical skill development - President - Asian Tribune - February 7th, 2017 [February 7th, 2017]
- Younger generation inheritors of knowledge-based economy: President - Lanka Business Online - February 7th, 2017 [February 7th, 2017]
- Morguard - 2017 Real Estate Investment Trends to Watch in Canada - Canada NewsWire (press release) - February 7th, 2017 [February 7th, 2017]
- Ask Yourself These Two Questions About America's Economic Future - Fortune - February 8th, 2017 [February 8th, 2017]
- The Informal Economy and Decent Work: A Policy Resource ... - February 8th, 2017 [February 8th, 2017]
- Thunder Bay's population experiencing low growth - Tbnewswatch.com - February 9th, 2017 [February 9th, 2017]
- Substantial investment in agriculture needed to ensure enough food for all - Daily Nation - February 9th, 2017 [February 9th, 2017]
- Can Russia project power while battered by economic woes? - Asia Times - February 9th, 2017 [February 9th, 2017]
- When will Russia finally break its 'resource curse'? - Russia Direct - February 10th, 2017 [February 10th, 2017]
- TEA & TWO SLICES | On Giant Snow Penises And Christy Clark's Shudder-Worthy Interview - Scout Magazine (blog) - February 10th, 2017 [February 10th, 2017]
- Can Russia project power while battered by economic woes ... - MENAFN.COM - February 11th, 2017 [February 11th, 2017]
- Siemens backs Qatar''s economic ambitions with innovation - MENAFN.COM - February 12th, 2017 [February 12th, 2017]
- The 'Dutch disease' reexamined: Resource booms can benefit the wider economy - USAPP American Politics and Policy (blog) - February 13th, 2017 [February 13th, 2017]
- Charles Lawton: Here's a proposal to create real equality of job opportunity - Press Herald - February 14th, 2017 [February 14th, 2017]
- India can't write-off coal-based energy so soon: World Coal Association - Economic Times - February 14th, 2017 [February 14th, 2017]
- The pathologies of redistributive resource transfers - Livemint - February 15th, 2017 [February 15th, 2017]
- Jessica Wright: Well-managed farmland benefits community, watershed - Conway Daily Sun - February 15th, 2017 [February 15th, 2017]
- Evaluate FLSA for its Ability to Keep Pace with Today's Workplace, SHRM Tells House Subcommittee - SHRM - February 16th, 2017 [February 16th, 2017]
- Officials hope fiber optic expansion helps diversify Decatur's economy - The Decatur Daily - February 16th, 2017 [February 16th, 2017]
- 10th Biennial Nehalem Bay Estuary Cleanup set - Tillamook Headlight-Herald - February 16th, 2017 [February 16th, 2017]
- Howard gives Barnett a hand on hustings - The West Australian - February 18th, 2017 [February 18th, 2017]
- EDITORIAL COMMENT: Let's celebrate President's birthday with ... - Chronicle - February 20th, 2017 [February 20th, 2017]
- Kentucky Main Street Program Communities Contributed $110M to State Economy in 2016 - WMKY - February 20th, 2017 [February 20th, 2017]
- GM, Steelcase see a web of opportunity in the circular economy - GreenBiz - February 21st, 2017 [February 21st, 2017]
- The sputtering energy economy: Can it be revved up? - Meridian Star - February 21st, 2017 [February 21st, 2017]
- The difference between Malcolm Turnbull and Justin Trudeau - The Australian Financial Review - February 21st, 2017 [February 21st, 2017]
- In the Face of a Trump Environmental Rollback, California Stands in ... - Yale Environment 360 - February 22nd, 2017 [February 22nd, 2017]
- Report: Boundary Waters nets $77 million from summer visitors - Duluth News Tribune - February 22nd, 2017 [February 22nd, 2017]
- DENIM SPIRIT: An economy based on abundance - Finger Lakes Times - February 23rd, 2017 [February 23rd, 2017]
- HR International to hold confab on African economy - Guardian - February 24th, 2017 [February 24th, 2017]
- Event promotes innovation and technology expansion - News - Castlegar News - February 24th, 2017 [February 24th, 2017]
- The Venus Project Plans to Bring Humanity to the Next Stage of Social Evolution. Here's How. - Futurism - February 24th, 2017 [February 24th, 2017]
- Best returns since 1900? Resource based countries, including ... - Financial Post - February 24th, 2017 [February 24th, 2017]
- Economic growth projected for Saskatchewan in 2017 | Regina ... - Regina Leader-Post - February 24th, 2017 [February 24th, 2017]
- Energy as a Model for US-Mexico Economic Partnership - RealClearEnergy - February 24th, 2017 [February 24th, 2017]
- Science and Technology: Minister says FG will harness natural ... - Pulse Nigeria - February 24th, 2017 [February 24th, 2017]
- Montana Jobs Not Well Positioned - Big Sky Business Journal - Big Sky Business Journal - February 25th, 2017 [February 25th, 2017]
- The future of WA's economy: Life beyond mining - WAtoday - February 27th, 2017 [February 27th, 2017]
- Verdant Zeal set to celebrate decade of providing media solutions - Guardian - February 28th, 2017 [February 28th, 2017]
- Lessons from Canada's scientific resistance - Bulletin of the Atomic Scientists - February 28th, 2017 [February 28th, 2017]
- St Ann can do better Earl Jarrett - Jamaica Gleaner - February 28th, 2017 [February 28th, 2017]
- Firm canvasses technology strategy - The Nation Newspaper - March 3rd, 2017 [March 3rd, 2017]
- Mandryk: Next Saskatchewan boom needs to be from our heritage fund - Regina Leader-Post - March 3rd, 2017 [March 3rd, 2017]
- Bank of Canada channels Al Gore - Toronto Sun - March 3rd, 2017 [March 3rd, 2017]
- Australia's economy has been growing for 25 years straight Quartz - Quartz - March 4th, 2017 [March 4th, 2017]
- The Venus Project envisions a sustainable redesign of our cities and civilization - Inhabitat - March 4th, 2017 [March 4th, 2017]
- State's high-tech hits $1 billion economic milestone - Daily Inter Lake - March 7th, 2017 [March 7th, 2017]
- The startup economy - Canadian Lawyer Magazine - March 7th, 2017 [March 7th, 2017]
- Nehalem Bay Estuary Cleanup - North Coast Citizen - March 7th, 2017 [March 7th, 2017]
- Pipelines to be a 'fundamental' issue for NDP leadership race: Julian - Hill Times (subscription) - March 8th, 2017 [March 8th, 2017]
- Prime Minister Trudeau, no fan of the middle class - Hill Times (subscription) - March 8th, 2017 [March 8th, 2017]
- Finally, Democrats Have A Pro Wrestler In Their Corner - Huffington Post - March 9th, 2017 [March 9th, 2017]
- WA election: Labor outlines campaign costings and debt reduction plan - ABC Online - March 9th, 2017 [March 9th, 2017]
- WA election: Death threats, One Nation legal action, stadium stoush campaign trail action - ABC Online - March 9th, 2017 [March 9th, 2017]
- Russia, Israeli firm agree to invest $100 mln in Russia's dairy industry - Reuters - March 10th, 2017 [March 10th, 2017]
- Maine deserves a chance to capitalize on the North Woods monument - Bangor Daily News - March 10th, 2017 [March 10th, 2017]
- MAN, RMRDC, others to promote resource-based MSMEs,funding - The Nation Newspaper - March 10th, 2017 [March 10th, 2017]
- Jobs, education focus of Gov. Brown's Prineville visit - KTVZ - KTVZ - March 10th, 2017 [March 10th, 2017]
- HIKE NETARTS BAYOCEAN SPIT - North Coast Citizen - March 11th, 2017 [March 11th, 2017]
- Jobs versus or for the environment? - Budgeeter News - March 11th, 2017 [March 11th, 2017]
- Canada Invests $325 Million in the Fish and Seafood Sector - Yahoo Finance - March 11th, 2017 [March 11th, 2017]
- We are taking steps to overhaul economy through knowledge-based ... - TheNewsGuru (satire) (press release) (blog) - March 11th, 2017 [March 11th, 2017]
- Canada Invests $325 Million in the Fish and Seafood Sector - Marketwired (press release) - March 12th, 2017 [March 12th, 2017]
- Saskatchewan gender, immigrant wage gaps among widest in Canada - Saskatoon StarPhoenix - April 8th, 2017 [April 8th, 2017]
- Week in Film: Endless LOLs, an Acid Western, and Great Advice ... - Bedford + Bowery - April 8th, 2017 [April 8th, 2017]
- Famous fish the focus of 'steelhead ecology' hike - Tillamook Headlight-Herald - April 8th, 2017 [April 8th, 2017]
- 'Explore Nature' sets Cape Lookout hike - Tillamook Headlight-Herald - April 8th, 2017 [April 8th, 2017]
- Califonria Lawmakers approve billion dollar gas tax | KBAK - Bakersfield Now - April 8th, 2017 [April 8th, 2017]
- Globe editorial: On pipelines, Ottawa must have the final say - The ... - The Globe and Mail - June 6th, 2017 [June 6th, 2017]
- Politics biggest determinant of economic future, says Page - Tbnewswatch.com - June 6th, 2017 [June 6th, 2017]
- Our Turn: Pass SB 129, save 900 New Hampshire jobs - Concord Monitor - June 6th, 2017 [June 6th, 2017]
- We'll Always Have Paris: Trump's Impact On The Climate Agreement - HuffPost - June 6th, 2017 [June 6th, 2017]
- A strategy that will make Canadian innovation flourish - The Globe and Mail - June 6th, 2017 [June 6th, 2017]
- Ocean Conference Side Events Highlight Cooperation on SDG 14 ... - IISD Reporting Services - June 7th, 2017 [June 7th, 2017]
- We must tap 'blue economy' for progress - Daily Nation - June 8th, 2017 [June 8th, 2017]
- Minnesota Power Proposes Next Step in EnergyForward Plan - POWER magazine - June 9th, 2017 [June 9th, 2017]