Richmond, BC Vector Aerospace Corporation (Vector Aerospace), a global independent provider of aviation maintenance, repair and overhaul (MRO) services, is pleased to announce that Vector Aerospace Helicopter Services North America (HS-NA) has been awarded a 2015 Total Quality Award from Rolls-Royce for the M250 engine product line on Monday, March 2nd, 2015 at the Rolls-Royce FIRST Network Recognition Reception, held as part of Rolls-Royce's attendance at this year's HAI HELI-EXPO in Orlando, Florida.
Upon receiving this award, Vector Aerospace was recognized for a 94% satisfaction rating with M250 customers for Quality and a 93% rating for Customer Service as well as an average TAT improvement of 14% for M250 engines and modules. Vector Aerospace also produced 35% reduction in warranties over four years, and invested significantly in piece part repair development over 2014.
It was an honor for Vector Aerospace to receive this award during the Rolls-Royce FIRST Network Recognition Reception just before the kick-off of HAI Heli-Expo last week, said Julien Roy, vice president, operations for HS-NAs Richmond facility. We are grateful for the strong relationship we have developed with Rolls-Royce over the past thirty years, and look forward to continuing to provide best-in class quality and support on this engine line for years to come.
Vector Aerospace is an Approved Maintenance Repair and Overhaul Centre (AMROC) for Rolls-Royce M250 engines and an active participant in the Rolls-Royce Authorized Maintenance Center (AMC) council. Its M250 shop was established over thirty years ago. During the early 1980s, Vector Aerospaces M250 capabilities underwent some intense development to reduce vibration and power deterioration, allowing for a more efficient and reliable engine. Over this period Vector has worked with Rolls-Royce to support the US Army Kiowa Warrior Program, the US Border and Protection Service, and the Rolls-Royce CLS (C30R3) program.
Vector Aerospace holds approvals from some of the world's leading turbine engine, airframe and avionics OEMs. Powerplants supported include a wide range of turboshafts, turboprops and turbofans from General Electric, Honeywell, Pratt & Whitney Canada, Rolls-Royce and Turbomeca. Vector Aerospace also provides support for a wide range of airframes from Airbus Helicopters, Bell, Boeing and Sikorsky. Its capabilities include major inspections and dynamic component overhaul, full-service avionics capability including aircraft rewiring, as well as mission equipment installation and glass cockpit upgrades.
About Vector Aerospace
Vector Aerospace is a global provider of aviation maintenance, repair and overhaul (MRO) services. Through facilities in Canada, the United States, the United Kingdom, France, Australia, South Africa, Kenya and Singapore, Vector Aerospace serves commercial and military customers in supporting gas turbine engines, components and helicopter airframes. Vector Aerospaces 2,700 employees act with integrity in setting the standard of customer service.
More information can be found on the companys website at http://www.vectoraerospace.com
Read more:
Vector Aerospace Graciously Accepts 2015 Rolls-Royce M250 Total Quality Award
- why can't i print in the message area? - November 7th, 2009 [November 7th, 2009]
- smoke detectors - November 7th, 2009 [November 7th, 2009]
- Insulation drawings - November 7th, 2009 [November 7th, 2009]
- Boiler. - November 7th, 2009 [November 7th, 2009]
- Electrical Harmonics - November 7th, 2009 [November 7th, 2009]
- axial thrust - November 7th, 2009 [November 7th, 2009]
- Pl inform which make suitable for this specification - November 7th, 2009 [November 7th, 2009]
- CapsLock - November 7th, 2009 [November 7th, 2009]
- How to Calculate Drag Reduction Factor for surge analysis - November 7th, 2009 [November 7th, 2009]
- cable..pls help - November 7th, 2009 [November 7th, 2009]
- 11Kv joints - November 7th, 2009 [November 7th, 2009]
- how to calculate required torque? - November 7th, 2009 [November 7th, 2009]
- IP rating for enclosures - November 7th, 2009 [November 7th, 2009]
- 11kv JOINTS SPACING ON PARALLEL CABLES - November 7th, 2009 [November 7th, 2009]
- beep sounds - November 7th, 2009 [November 7th, 2009]
- Increse speed of pneumatic cylinder - November 7th, 2009 [November 7th, 2009]
- Pipe fittings-Manufacturing/Quality Assurance - November 7th, 2009 [November 7th, 2009]
- kango memolition hammer - November 7th, 2009 [November 7th, 2009]
- Loss calculation in undergound Transmission Cables - November 7th, 2009 [November 7th, 2009]
- Design in ASP.NET - November 7th, 2009 [November 7th, 2009]
- axial pump - November 7th, 2009 [November 7th, 2009]
- Auger bit - November 7th, 2009 [November 7th, 2009]
- Pipe - November 7th, 2009 [November 7th, 2009]
- Centrifugal oil filter ideas - November 7th, 2009 [November 7th, 2009]
- When to install Horizontal Condensate Pot (Probably also called Spun Type) ?? - November 7th, 2009 [November 7th, 2009]
- Confusion about a Resistance Bulb - November 7th, 2009 [November 7th, 2009]
- Loop testing for a NON-HART 4 wire instrument - November 7th, 2009 [November 7th, 2009]
- My VAWT Project, next phase - November 7th, 2009 [November 7th, 2009]
- voltage doubler - November 7th, 2009 [November 7th, 2009]
- How to build corners and joints using Red Oak timbers? - November 7th, 2009 [November 7th, 2009]
- THERMAL OIL BOILER - November 7th, 2009 [November 7th, 2009]
- How Do You Get a Degree in Green Energy? - November 7th, 2009 [November 7th, 2009]
- deareator pegging - November 7th, 2009 [November 7th, 2009]
- 99 ford ranger with no brake pedal at all - November 7th, 2009 [November 7th, 2009]
- CAD tool for electronic circuitry design - November 7th, 2009 [November 7th, 2009]
- hvac - November 7th, 2009 [November 7th, 2009]
- Unfinalized video miniDVD data recovery - November 7th, 2009 [November 7th, 2009]
- eletronics - November 7th, 2009 [November 7th, 2009]
- codless phones programming - November 7th, 2009 [November 7th, 2009]
- Effectiveness in cooling a drink with ice than water? - November 7th, 2009 [November 7th, 2009]
- Free Vibration Analysis of Tapered Composite Wings - November 8th, 2009 [November 8th, 2009]
- Can You Treat Composite Beams or Wings Mathematically like Isotropic Wings? - November 8th, 2009 [November 8th, 2009]
- Particle, Particle in Space, Tell Me About Earthquakes - November 8th, 2009 [November 8th, 2009]
- Russian Rocket Engine – Best in the World - November 8th, 2009 [November 8th, 2009]
- New Online Evaluation of Laminated Composite Stiffnesses - November 8th, 2009 [November 8th, 2009]
- 'Autonomous' helicopters teach themselves to fly - November 8th, 2009 [November 8th, 2009]
- Next Target – Jupiter - November 8th, 2009 [November 8th, 2009]
- NASA's FERMI, Space, and Time - November 8th, 2009 [November 8th, 2009]
- Lunchtime Salon Today in L.A. - November 8th, 2009 [November 8th, 2009]
- A vote for McCain is a vote against science - November 8th, 2009 [November 8th, 2009]
- NASA Study Investigates Mental Overload in Pilots - November 8th, 2009 [November 8th, 2009]
- NASA Releases Columbia Crew Safety Report - November 8th, 2009 [November 8th, 2009]
- What the Stimulus Package Means for Science - November 8th, 2009 [November 8th, 2009]
- All Scientists Have Conflicts of Interest (Duh) - November 8th, 2009 [November 8th, 2009]
- Congress Considers Killing Open-Access Journals - November 8th, 2009 [November 8th, 2009]
- Transmission Swing Angle - December 12th, 2009 [December 12th, 2009]
- Long Weld Neck Flanges - December 12th, 2009 [December 12th, 2009]
- Super Critical Fluid Extraction for Rose Oil - December 12th, 2009 [December 12th, 2009]
- Capacitor Bank Calculations - December 12th, 2009 [December 12th, 2009]
- Power Supplies and Dummy Loads - December 12th, 2009 [December 12th, 2009]
- Standards for Piping Vibration - December 12th, 2009 [December 12th, 2009]
- Automatic Generator Changovers - December 12th, 2009 [December 12th, 2009]
- Synchronous Generators - December 12th, 2009 [December 12th, 2009]
- Suzuki Swift Brakes - Squeaks and Whistles - December 12th, 2009 [December 12th, 2009]
- Flange Serration - December 12th, 2009 [December 12th, 2009]
- Hydraulic Shapes and Reciprocating Machines - December 12th, 2009 [December 12th, 2009]
- No Shortage of Engineers After All! - December 12th, 2009 [December 12th, 2009]
- Delta Starter Diagram - December 12th, 2009 [December 12th, 2009]
- 2002 Chevy Duramax Diesel - Low Voltmeter Reading - December 12th, 2009 [December 12th, 2009]
- Energy Survey and Consumer Mapping Methodoogy - December 12th, 2009 [December 12th, 2009]
- Setback for Geothermal Energy - December 12th, 2009 [December 12th, 2009]
- Darlington Amplifier - December 12th, 2009 [December 12th, 2009]
- Diesel Storage Tank Design - December 12th, 2009 [December 12th, 2009]
- Car MPG Questions - December 12th, 2009 [December 12th, 2009]
- Dark LCD Display - December 12th, 2009 [December 12th, 2009]
- Calculating the Strength of Concrete Floors - December 12th, 2009 [December 12th, 2009]
- Hitachi Projection TV - December 12th, 2009 [December 12th, 2009]
- WW II Water-Injected Engines - December 12th, 2009 [December 12th, 2009]
- Soap to Prevent A1H1N1 Contamination - December 12th, 2009 [December 12th, 2009]
- Car won't shift out of first gear - December 12th, 2009 [December 12th, 2009]