Tucked deep within Broomfield-based Ball Corporation, far from its globe-dominating can business, is a small division whose growth has become so compelling that it will almost double the size of its Westminster manufacturing center this year, adding hundreds of jobs in the process.
Strolling through the corridors of this classified facility, Ball Vice President of Tactical Solutions Rob Freedman is greeted by young engineers, carrying prototypes of antennas and other devices, some of which, when realized, will be tucked into the wings of military fighter jets.
In 2016, the engineers and technicians who work here shipped 7,000 custom made parts and devices, most of which can't be photographed or discussed publicly.
Ball Aerospace manufacturing center expansion in Westminster. (Courtesy Image / Daily Camera)
Known for dreaming up, then designing and ultimately manufacturing lenses for navy ship scopes, high-tech, ultra-rugged antennas for fighter jets and various pieces of flight hardware for earth and space, the tactical solutions division has seen its backlog surge dramatically. At the end of 2016 it helped grow the backlog at Ball Aerospace to $1.4 billion, its highest point since Ball Aerospace and Technologies was founded 60 years ago.
Tactical solutions is one division of Ball Aerospace and Technologies. Within the Westminster manufacturing facility, Freedman is dwarfed by giant autoclaves and warehouse-like rooms whose ceilings top out at 45 feet, more than five times taller than the average office ceiling. Bright yellow pulleys hang down from those towering ceilings, ready to pick up which ever 10-ton part needs to be lifted and moved.
When the division breaks ground on the expansion in April, it will start a months-long process where the existing 200,000 square foot facility will morph to 345,000 square feet, a 72 percent increase in capacity.
Damon Zuetell is industrial operations manager. His job is to ensure the new space is built quickly and that it keeps hundreds of research and design engineers near the test labs and manufacturing rooms where the devices are imagined and then constructed.
"We like to keep smart people close to what they are building," he said.
As the division's backlog has grown so have its projects. "Our stuff is getting bigger as we develop higher value, more complex systems," Freedman said.
Ball Corp. CEO John Hayes told Wall Street analysts last month that the company had decided to expand the Westminster facility.
"It's a capacity issue," Hayes said. "We don't have enough manufacturing space to execute on all the wins we've gotten."
In the years ahead, "hundreds and hundreds" more fighter planes will be made, Hayes said, and Ball Corp. has won contracts to make many of the parts needed for them to be mission-ready.
Chicago-based MorningStar analyst Charles Gross tracks Ball Corp. That the company has opted to invest in a factory expansion is noteworthy, he said.
"In general Ball operates a conservative business and they are cautious about allocating capital," Gross said. "They want to be confident they will have a high return on that capital before they lay it out."
Last year, Ball Aerospace, which includes Freedman's division, generated profits of $88 million, on sales of $818 million, roughly 10 percent more than in 2015, according to the company's year-end earnings statement.
These earnings are just a small piece of Ball's overall global business, which generated profits of $224 million on sales of $9.1 billion.
The exterior of the Ball Aerospace and Technologies Corp. Manufacturing Center on Monday in Broomfield. Feb. 13, 2016 (Jeremy Papasso / Staff Photographer)
Last year, Ball's aerospace division added 300 workers and this year it plans to add 300 more, according to spokesman William Rigler. That 600 person bump doesn't include additional hires that will come when the manufacturing center expansion is complete.
When the two years of hiring are combined that constitutes a more than 30 percent jump in Ball's overall Colorado employment base of 2300.
That is nearly 10 percent of Colorado's overall aerospace direct employment base of 25,500 people, according to a new industry report by the Metro Denver Economic Development Corporation. When manufacturing sub-sector jobs are counted, the state employs more than 180,000 people in this arena.
That employment base is one of the reasons Colorado ranks no. 2 nationwide for aerospace employment, according to Jay Lindell, who acts as lead on aerospace for the Colorado Office of Economic Development and International Trade.
Ball is the largest "Colorado-grown" aerospace firm, Lindell said, among eight who have major operations here. It is known as a niche player, one that provides specialized parts and equipment to such behemoths as Boeing, Northrup Grumman, Raytheon and Lockheed Martin Corp., among others.
Despite the Trump Administration's concerns about the cost of Lockheed's F-35 figher jet, Ball officials and industry experts are taking a wait-and-see approach on what if any effect politics will have on the long-term defense and aerospace budgets.
"It's too early to tell," Lindell said.
Back at the manufacturing center in Westminster, Freedman reels off each of the quality honors the center has won in the past five years, with awards in gleaming showcases coming from Boeing, Northrup Grumman, Raytheon and Lockheed Martin, among others.
His division was named one of the top 25 suppliers out of thousands for its work on the F-35 and it has won similar awards from the other major U.S. defense manufacturers.
"It's our 100 percent 'stick rate,'" Freedman said. "When we go down to the (Lockheed) plant in Texas, and they install our devices on those jets, our's work. So they never have to be taken off to fix. They like that."
Jerd Smith: 303-473-1332, smithj@dailycamera.com or twitter.com/jerd_smith
View original post here:
Under the radar: Broomfield's Ball Aerospace sees its tactical unit take off - Boulder Daily Camera
- why can't i print in the message area? - November 7th, 2009 [November 7th, 2009]
- smoke detectors - November 7th, 2009 [November 7th, 2009]
- Insulation drawings - November 7th, 2009 [November 7th, 2009]
- Boiler. - November 7th, 2009 [November 7th, 2009]
- Electrical Harmonics - November 7th, 2009 [November 7th, 2009]
- axial thrust - November 7th, 2009 [November 7th, 2009]
- Pl inform which make suitable for this specification - November 7th, 2009 [November 7th, 2009]
- CapsLock - November 7th, 2009 [November 7th, 2009]
- How to Calculate Drag Reduction Factor for surge analysis - November 7th, 2009 [November 7th, 2009]
- cable..pls help - November 7th, 2009 [November 7th, 2009]
- 11Kv joints - November 7th, 2009 [November 7th, 2009]
- how to calculate required torque? - November 7th, 2009 [November 7th, 2009]
- IP rating for enclosures - November 7th, 2009 [November 7th, 2009]
- 11kv JOINTS SPACING ON PARALLEL CABLES - November 7th, 2009 [November 7th, 2009]
- beep sounds - November 7th, 2009 [November 7th, 2009]
- Increse speed of pneumatic cylinder - November 7th, 2009 [November 7th, 2009]
- Pipe fittings-Manufacturing/Quality Assurance - November 7th, 2009 [November 7th, 2009]
- kango memolition hammer - November 7th, 2009 [November 7th, 2009]
- Loss calculation in undergound Transmission Cables - November 7th, 2009 [November 7th, 2009]
- Design in ASP.NET - November 7th, 2009 [November 7th, 2009]
- axial pump - November 7th, 2009 [November 7th, 2009]
- Auger bit - November 7th, 2009 [November 7th, 2009]
- Pipe - November 7th, 2009 [November 7th, 2009]
- Centrifugal oil filter ideas - November 7th, 2009 [November 7th, 2009]
- When to install Horizontal Condensate Pot (Probably also called Spun Type) ?? - November 7th, 2009 [November 7th, 2009]
- Confusion about a Resistance Bulb - November 7th, 2009 [November 7th, 2009]
- Loop testing for a NON-HART 4 wire instrument - November 7th, 2009 [November 7th, 2009]
- My VAWT Project, next phase - November 7th, 2009 [November 7th, 2009]
- voltage doubler - November 7th, 2009 [November 7th, 2009]
- How to build corners and joints using Red Oak timbers? - November 7th, 2009 [November 7th, 2009]
- THERMAL OIL BOILER - November 7th, 2009 [November 7th, 2009]
- How Do You Get a Degree in Green Energy? - November 7th, 2009 [November 7th, 2009]
- deareator pegging - November 7th, 2009 [November 7th, 2009]
- 99 ford ranger with no brake pedal at all - November 7th, 2009 [November 7th, 2009]
- CAD tool for electronic circuitry design - November 7th, 2009 [November 7th, 2009]
- hvac - November 7th, 2009 [November 7th, 2009]
- Unfinalized video miniDVD data recovery - November 7th, 2009 [November 7th, 2009]
- eletronics - November 7th, 2009 [November 7th, 2009]
- codless phones programming - November 7th, 2009 [November 7th, 2009]
- Effectiveness in cooling a drink with ice than water? - November 7th, 2009 [November 7th, 2009]
- Free Vibration Analysis of Tapered Composite Wings - November 8th, 2009 [November 8th, 2009]
- Can You Treat Composite Beams or Wings Mathematically like Isotropic Wings? - November 8th, 2009 [November 8th, 2009]
- Particle, Particle in Space, Tell Me About Earthquakes - November 8th, 2009 [November 8th, 2009]
- Russian Rocket Engine – Best in the World - November 8th, 2009 [November 8th, 2009]
- New Online Evaluation of Laminated Composite Stiffnesses - November 8th, 2009 [November 8th, 2009]
- 'Autonomous' helicopters teach themselves to fly - November 8th, 2009 [November 8th, 2009]
- Next Target – Jupiter - November 8th, 2009 [November 8th, 2009]
- NASA's FERMI, Space, and Time - November 8th, 2009 [November 8th, 2009]
- Lunchtime Salon Today in L.A. - November 8th, 2009 [November 8th, 2009]
- A vote for McCain is a vote against science - November 8th, 2009 [November 8th, 2009]
- NASA Study Investigates Mental Overload in Pilots - November 8th, 2009 [November 8th, 2009]
- NASA Releases Columbia Crew Safety Report - November 8th, 2009 [November 8th, 2009]
- What the Stimulus Package Means for Science - November 8th, 2009 [November 8th, 2009]
- All Scientists Have Conflicts of Interest (Duh) - November 8th, 2009 [November 8th, 2009]
- Congress Considers Killing Open-Access Journals - November 8th, 2009 [November 8th, 2009]
- Transmission Swing Angle - December 12th, 2009 [December 12th, 2009]
- Long Weld Neck Flanges - December 12th, 2009 [December 12th, 2009]
- Super Critical Fluid Extraction for Rose Oil - December 12th, 2009 [December 12th, 2009]
- Capacitor Bank Calculations - December 12th, 2009 [December 12th, 2009]
- Power Supplies and Dummy Loads - December 12th, 2009 [December 12th, 2009]
- Standards for Piping Vibration - December 12th, 2009 [December 12th, 2009]
- Automatic Generator Changovers - December 12th, 2009 [December 12th, 2009]
- Synchronous Generators - December 12th, 2009 [December 12th, 2009]
- Suzuki Swift Brakes - Squeaks and Whistles - December 12th, 2009 [December 12th, 2009]
- Flange Serration - December 12th, 2009 [December 12th, 2009]
- Hydraulic Shapes and Reciprocating Machines - December 12th, 2009 [December 12th, 2009]
- No Shortage of Engineers After All! - December 12th, 2009 [December 12th, 2009]
- Delta Starter Diagram - December 12th, 2009 [December 12th, 2009]
- 2002 Chevy Duramax Diesel - Low Voltmeter Reading - December 12th, 2009 [December 12th, 2009]
- Energy Survey and Consumer Mapping Methodoogy - December 12th, 2009 [December 12th, 2009]
- Setback for Geothermal Energy - December 12th, 2009 [December 12th, 2009]
- Darlington Amplifier - December 12th, 2009 [December 12th, 2009]
- Diesel Storage Tank Design - December 12th, 2009 [December 12th, 2009]
- Car MPG Questions - December 12th, 2009 [December 12th, 2009]
- Dark LCD Display - December 12th, 2009 [December 12th, 2009]
- Calculating the Strength of Concrete Floors - December 12th, 2009 [December 12th, 2009]
- Hitachi Projection TV - December 12th, 2009 [December 12th, 2009]
- WW II Water-Injected Engines - December 12th, 2009 [December 12th, 2009]
- Soap to Prevent A1H1N1 Contamination - December 12th, 2009 [December 12th, 2009]
- Car won't shift out of first gear - December 12th, 2009 [December 12th, 2009]