HILL AIR FORCE BASE A new aircraft restoration and maintenance facility has recently been completed and turned over to the Hill Aerospace Museum.
This newly constructed building came about through the Falcon Hill enhanced use lease, or EUL, program and replaced the museums previous restoration facility, an old and weathered warehouse near the new Northrop Grumman facility located next to the bases Roy Gate.
The EUL program allows the Air Force to lease land to a developer to create and lease commercial space and infrastructure. The new facility will be used to care for the museums collection of aircraft and other artifacts while offering unique, real-world airframe work opportunities for local high school and college students, as well as base volunteers.
Museum aircraft are acquired from multiple sources and often arrive needing a significant amount of work, including corrosion mitigation to preserve the exterior and interior restoration before they are displayed.
Each project is very individual in nature and is accomplished by enlisting a large amount of volunteer help from across Hill AFB and the outlying community.
Many volunteers with prior airframe technical knowledge and experience donate time and provide invaluable skills with part fabrication and reconstruction know how.
Brandon Hedges, Hill Aerospace Museum restoration chief, said part of the volunteer restoration manpower is provided by local students.
One very exciting piece of our volunteer restoration program is the partner relationships we have with several local academic institutions, which allows students from the surrounding community to learn and work on real aircraft at our facility, said Hedges.
An existing memorandum of understanding has been in place for six years between the museum and the Utah Military Academy, a local charter high school, which benefits both students and the museum.
It allows junior and senior students enrolled in the academys basic airframes structure course, the opportunity to work on aircraft restoration projects of all different vintage, types and models.
Students are currently working on a B-29 Superfortress nose art display consisting of 15 four-by-four aluminum panels, each requiring up to three thousand rivets that will simulate the airframes fuselage skin depicting a variety of World War II nose art.
Throughout instruction students learn material identification and properties, how to form metal, as well as the importance of tool safety and control, which is modeled off of Air Force regulations.
Tools and equipment consist of metal cutting and forming tools and some wood working tools, which are required for work on some older wood platform aircraft, like the B-17 Flying Fortress
This program allows us to utilize students for restoration work on project aircraft, while providing them invaluable airframe experience as well as course credit hours, said Hedges. We are fortunate to have Darrell Gronau, aviation structures repair instructor and retired Air Force chief master sergeant, who volunteers through the museums education program and is teaching this course at our new facility.
In addition, a relationship was recently established with the Davis Applied Technology College for student work on the museums current F-117 Nighthawk project.
As with many modern aircraft received by the museum, the F-117 arrived missing parts such as leading- trailing edges and a nose cone, which were removed for security reasons.
In these type of situations, the museum staff is left to fabricate replacement parts in order to replicate the missing pieces.
Dimensions for replica parts were sent by the National Museum and Tonopah, but while researching restoration we decided to replace parts with fabricated composites, which will be similar to the original layout and design, said Hedges. For example, metal leading edges were recommended, but the original airframe edges were made of composite, so we ended up partnering with the DATC to create those for us, with college-level students preforming the work.
With volunteer support and community academic partnerships, the Hill Aerospace museum is able to fabricate almost all restoration parts in house, only outsourcing on rare occasion for very large projects such as an entire airframe.
Additionally, the museum offers paid annual college internships, six of which are hired out by the restoration department.
Interns receive meaningful experience that can later be applied in the real world, with a monetary amount paid to the students tuition school account by the museums Heritage Foundation for 200 hours of restoration labor.
Aaron Clark, Hill Aerospace Museum director, said that while he is excited how this new resource will improve collection care, he is most enthusiastic about exploring and hopefully developing additional school partnership opportunities in the future.
With this new facility and the amenities it offers, we now hope to partner with more neighboring high schools and colleges to develop an in-house airframe maintenance program to educate and inspire the Airmen of tomorrow civilian and military through the unique hands-on experiences they can get at this museum.
Visit link:
- why can't i print in the message area? - November 7th, 2009 [November 7th, 2009]
- smoke detectors - November 7th, 2009 [November 7th, 2009]
- Insulation drawings - November 7th, 2009 [November 7th, 2009]
- Boiler. - November 7th, 2009 [November 7th, 2009]
- Electrical Harmonics - November 7th, 2009 [November 7th, 2009]
- axial thrust - November 7th, 2009 [November 7th, 2009]
- Pl inform which make suitable for this specification - November 7th, 2009 [November 7th, 2009]
- CapsLock - November 7th, 2009 [November 7th, 2009]
- How to Calculate Drag Reduction Factor for surge analysis - November 7th, 2009 [November 7th, 2009]
- cable..pls help - November 7th, 2009 [November 7th, 2009]
- 11Kv joints - November 7th, 2009 [November 7th, 2009]
- how to calculate required torque? - November 7th, 2009 [November 7th, 2009]
- IP rating for enclosures - November 7th, 2009 [November 7th, 2009]
- 11kv JOINTS SPACING ON PARALLEL CABLES - November 7th, 2009 [November 7th, 2009]
- beep sounds - November 7th, 2009 [November 7th, 2009]
- Increse speed of pneumatic cylinder - November 7th, 2009 [November 7th, 2009]
- Pipe fittings-Manufacturing/Quality Assurance - November 7th, 2009 [November 7th, 2009]
- kango memolition hammer - November 7th, 2009 [November 7th, 2009]
- Loss calculation in undergound Transmission Cables - November 7th, 2009 [November 7th, 2009]
- Design in ASP.NET - November 7th, 2009 [November 7th, 2009]
- axial pump - November 7th, 2009 [November 7th, 2009]
- Auger bit - November 7th, 2009 [November 7th, 2009]
- Pipe - November 7th, 2009 [November 7th, 2009]
- Centrifugal oil filter ideas - November 7th, 2009 [November 7th, 2009]
- When to install Horizontal Condensate Pot (Probably also called Spun Type) ?? - November 7th, 2009 [November 7th, 2009]
- Confusion about a Resistance Bulb - November 7th, 2009 [November 7th, 2009]
- Loop testing for a NON-HART 4 wire instrument - November 7th, 2009 [November 7th, 2009]
- My VAWT Project, next phase - November 7th, 2009 [November 7th, 2009]
- voltage doubler - November 7th, 2009 [November 7th, 2009]
- How to build corners and joints using Red Oak timbers? - November 7th, 2009 [November 7th, 2009]
- THERMAL OIL BOILER - November 7th, 2009 [November 7th, 2009]
- How Do You Get a Degree in Green Energy? - November 7th, 2009 [November 7th, 2009]
- deareator pegging - November 7th, 2009 [November 7th, 2009]
- 99 ford ranger with no brake pedal at all - November 7th, 2009 [November 7th, 2009]
- CAD tool for electronic circuitry design - November 7th, 2009 [November 7th, 2009]
- hvac - November 7th, 2009 [November 7th, 2009]
- Unfinalized video miniDVD data recovery - November 7th, 2009 [November 7th, 2009]
- eletronics - November 7th, 2009 [November 7th, 2009]
- codless phones programming - November 7th, 2009 [November 7th, 2009]
- Effectiveness in cooling a drink with ice than water? - November 7th, 2009 [November 7th, 2009]
- Free Vibration Analysis of Tapered Composite Wings - November 8th, 2009 [November 8th, 2009]
- Can You Treat Composite Beams or Wings Mathematically like Isotropic Wings? - November 8th, 2009 [November 8th, 2009]
- Particle, Particle in Space, Tell Me About Earthquakes - November 8th, 2009 [November 8th, 2009]
- Russian Rocket Engine – Best in the World - November 8th, 2009 [November 8th, 2009]
- New Online Evaluation of Laminated Composite Stiffnesses - November 8th, 2009 [November 8th, 2009]
- 'Autonomous' helicopters teach themselves to fly - November 8th, 2009 [November 8th, 2009]
- Next Target – Jupiter - November 8th, 2009 [November 8th, 2009]
- NASA's FERMI, Space, and Time - November 8th, 2009 [November 8th, 2009]
- Lunchtime Salon Today in L.A. - November 8th, 2009 [November 8th, 2009]
- A vote for McCain is a vote against science - November 8th, 2009 [November 8th, 2009]
- NASA Study Investigates Mental Overload in Pilots - November 8th, 2009 [November 8th, 2009]
- NASA Releases Columbia Crew Safety Report - November 8th, 2009 [November 8th, 2009]
- What the Stimulus Package Means for Science - November 8th, 2009 [November 8th, 2009]
- All Scientists Have Conflicts of Interest (Duh) - November 8th, 2009 [November 8th, 2009]
- Congress Considers Killing Open-Access Journals - November 8th, 2009 [November 8th, 2009]
- Transmission Swing Angle - December 12th, 2009 [December 12th, 2009]
- Long Weld Neck Flanges - December 12th, 2009 [December 12th, 2009]
- Super Critical Fluid Extraction for Rose Oil - December 12th, 2009 [December 12th, 2009]
- Capacitor Bank Calculations - December 12th, 2009 [December 12th, 2009]
- Power Supplies and Dummy Loads - December 12th, 2009 [December 12th, 2009]
- Standards for Piping Vibration - December 12th, 2009 [December 12th, 2009]
- Automatic Generator Changovers - December 12th, 2009 [December 12th, 2009]
- Synchronous Generators - December 12th, 2009 [December 12th, 2009]
- Suzuki Swift Brakes - Squeaks and Whistles - December 12th, 2009 [December 12th, 2009]
- Flange Serration - December 12th, 2009 [December 12th, 2009]
- Hydraulic Shapes and Reciprocating Machines - December 12th, 2009 [December 12th, 2009]
- No Shortage of Engineers After All! - December 12th, 2009 [December 12th, 2009]
- Delta Starter Diagram - December 12th, 2009 [December 12th, 2009]
- 2002 Chevy Duramax Diesel - Low Voltmeter Reading - December 12th, 2009 [December 12th, 2009]
- Energy Survey and Consumer Mapping Methodoogy - December 12th, 2009 [December 12th, 2009]
- Setback for Geothermal Energy - December 12th, 2009 [December 12th, 2009]
- Darlington Amplifier - December 12th, 2009 [December 12th, 2009]
- Diesel Storage Tank Design - December 12th, 2009 [December 12th, 2009]
- Car MPG Questions - December 12th, 2009 [December 12th, 2009]
- Dark LCD Display - December 12th, 2009 [December 12th, 2009]
- Calculating the Strength of Concrete Floors - December 12th, 2009 [December 12th, 2009]
- Hitachi Projection TV - December 12th, 2009 [December 12th, 2009]
- WW II Water-Injected Engines - December 12th, 2009 [December 12th, 2009]
- Soap to Prevent A1H1N1 Contamination - December 12th, 2009 [December 12th, 2009]
- Car won't shift out of first gear - December 12th, 2009 [December 12th, 2009]