DUBLIN, June 15, 2021 /PRNewswire/ -- The "Global Additive Manufacturing in Defense and Aerospace - Market and Technology Forecast to 2028" report has been added to ResearchAndMarkets.com's offering.
The global market revenue generated by this sector accounts for USD 1.36 Billion in the year 2020 and it is anticipated to reach a value of around USD 7.08 Billion by the year 2028. The market growth dynamics account for a CAGR of 20.11% during the forecast period, 2020-2028.
North America is expected to dominate the global market with a market value of USD 2.83 Billion owing to the increasing R&D investment in this sector coupled with an infrastructure that supports the same.
The early adoption of 3D printing technology in North America is another factor that fuels its market growth. Europe is expected to be the second-largest market due to the growing industrialization coupled with the low production cost of additive manufacturing. ROW is expected to grow with the highest CAGR of 35.71%.
Additive manufacturing is the process of building complex and precise products with the help of software integrated design techniques. This technology makes use of CAD (Computer-Aided Design) or 3D object scanners to take precise measurements of the product to be custom designed.
The material of construction used to produce these 3-D models are environmentally sustainable since they can be recycled. Increasing utilization of ecologically friendly technology that helps with environmental conservation and the rising awareness with regards to green technology further propels the growth of this market. Low cost of creating a product coupled with easy customization of the same impacts the market positively.
Additive manufacturing has started to become a tool for designing, testing, tooling, and manufacturing in the aerospace sector which extends beyond the manufacture of aircraft into ground assistance, maintenance, and repair systems. Additive manufacturing allows manufacturers in the aerospace industry to become more cost-effective, competitive, and successful in selling new products. Irrespective of the end-use in prototyping, tooling, or on-spot manufacturing; additive manufacturing is an essential capability to be adopted in this globalized world and remain competitive.
Repair parts are manufactured on demand where and when necessary such as in extreme environments, on a ship or on the battlefield. This has a particularly high effect on military supplies where a large amount of inventory is continually maintained to ensure readiness for operations. It could also lead to increased reliability and a significant decrease in both delivery times and logistical footprint essential for warfare and peacekeeping missions to run smoothly.
There are still technological difficulties to be addressed to completely achieve additive manufacturing capabilities such as the testing of the parts manufactured to ensure that they are not going to fail in operation.
The report is aimed at:
Country Analysis
Key Topics Covered:
1 Introduction1.1 Objective1.2 Market Introduction1.3 Market Scope1.4 Methodology1.5 Scenario based Forecast1.6 Who will benefit from this report?1.6.1 Business Leaders & Business Developers1.6.2 Additive Manufacturing Professionals1.6.3 Policy Makers, Budget Planners and Decision Makers1.6.4 Civil Government Leaders & Planners1.6.5 Financial analysts, Investors, Consultants1.7 Language
2 Executive Summary2.1 Additive Manufacturing in Defense & Aerospace, Market Trends and Insights2.2 Top Five Major Findings2.3 Major Conclusion2.4 Important Tables and Graphs
3 Current Market Overview of the Global Additive Manufacturing Market in Defense & Aerospace3.1 Introduction3.2 A Brief History of Additive Manufacturing3.3 Capabilities of AM in Defense & Aerospace3.3.1 Integrating AM in the Design Workflow3.3.2 Case Study (Manufacturing of Satellite Parts)3.3.3 AM Materials for Aerospace Applications3.3.4 AM Applications for Defense3.3.5 Significant Projects3.4 Standards for Additive Manufacturing
4 Current Market Trends of the Global Additive Manufacturing Market in Defense & Aerospace4.1 Additive Manufacturing Process Categories4.1.1 Binder Jetting4.1.2 Material Jetting4.1.3 Powder Bed Fusion4.1.4 Directed Energy Deposition4.1.5 Sheet Lamination4.1.6 Vat Photopolymerization4.1.7 Material Extrusion4.2 Recent Experiences in the Operations Field4.2.1 European Experience4.2.2 The U.S. Experience4.3 Plastic and other Non-Metal Processes4.4 Metal Processes
5 Market Technologies5.1 Satellite Fuel Tank5.2 3D Printed Firearms5.3 Unmanned Vehicles5.4 3D Printed Food in Space5.5 Grips, Jigs & Fixtures5.6 Brackets5.7 Cold Spray5.8 D-Shape Technology5.9 Contour Crafting
6 Market Dynamics6.1 Drivers6.1.1 Faster Time to Market6.1.2 Supply Chain Disruption6.1.3 Increased Spending in Defense and Aerospace6.1.4 Increased efficiency requirements6.1.5 Reduced Raw Material Usage6.1.6 Increased Design Confidence6.1.7 Improvements in Technology6.1.8 Obsolete Part Manufacturing6.1.9 Asset Optimization6.2 Restraints6.2.1 Cost of Equipment6.2.2 Lack of Expertise6.2.3 Size Limitations6.3 Challenges6.3.1 Material Standardization6.3.2 Certification6.3.3 Process Control6.3.4 Environment and Health Safety
Company Profiling
For more information about this report visit https://www.researchandmarkets.com/r/cjk5n0
Media Contact: Research and Markets Laura Wood, Senior Manager [emailprotected]
For E.S.T Office Hours Call +1-917-300-0470 For U.S./CAN Toll Free Call +1-800-526-8630 For GMT Office Hours Call +353-1-416-8900
U.S. Fax: 646-607-1904 Fax (outside U.S.): +353-1-481-1716
SOURCE Research and Markets
http://www.researchandmarkets.com
View original post here:
- why can't i print in the message area? - November 7th, 2009 [November 7th, 2009]
- smoke detectors - November 7th, 2009 [November 7th, 2009]
- Insulation drawings - November 7th, 2009 [November 7th, 2009]
- Boiler. - November 7th, 2009 [November 7th, 2009]
- Electrical Harmonics - November 7th, 2009 [November 7th, 2009]
- axial thrust - November 7th, 2009 [November 7th, 2009]
- Pl inform which make suitable for this specification - November 7th, 2009 [November 7th, 2009]
- CapsLock - November 7th, 2009 [November 7th, 2009]
- How to Calculate Drag Reduction Factor for surge analysis - November 7th, 2009 [November 7th, 2009]
- cable..pls help - November 7th, 2009 [November 7th, 2009]
- 11Kv joints - November 7th, 2009 [November 7th, 2009]
- how to calculate required torque? - November 7th, 2009 [November 7th, 2009]
- IP rating for enclosures - November 7th, 2009 [November 7th, 2009]
- 11kv JOINTS SPACING ON PARALLEL CABLES - November 7th, 2009 [November 7th, 2009]
- beep sounds - November 7th, 2009 [November 7th, 2009]
- Increse speed of pneumatic cylinder - November 7th, 2009 [November 7th, 2009]
- Pipe fittings-Manufacturing/Quality Assurance - November 7th, 2009 [November 7th, 2009]
- kango memolition hammer - November 7th, 2009 [November 7th, 2009]
- Loss calculation in undergound Transmission Cables - November 7th, 2009 [November 7th, 2009]
- Design in ASP.NET - November 7th, 2009 [November 7th, 2009]
- axial pump - November 7th, 2009 [November 7th, 2009]
- Auger bit - November 7th, 2009 [November 7th, 2009]
- Pipe - November 7th, 2009 [November 7th, 2009]
- Centrifugal oil filter ideas - November 7th, 2009 [November 7th, 2009]
- When to install Horizontal Condensate Pot (Probably also called Spun Type) ?? - November 7th, 2009 [November 7th, 2009]
- Confusion about a Resistance Bulb - November 7th, 2009 [November 7th, 2009]
- Loop testing for a NON-HART 4 wire instrument - November 7th, 2009 [November 7th, 2009]
- My VAWT Project, next phase - November 7th, 2009 [November 7th, 2009]
- voltage doubler - November 7th, 2009 [November 7th, 2009]
- How to build corners and joints using Red Oak timbers? - November 7th, 2009 [November 7th, 2009]
- THERMAL OIL BOILER - November 7th, 2009 [November 7th, 2009]
- How Do You Get a Degree in Green Energy? - November 7th, 2009 [November 7th, 2009]
- deareator pegging - November 7th, 2009 [November 7th, 2009]
- 99 ford ranger with no brake pedal at all - November 7th, 2009 [November 7th, 2009]
- CAD tool for electronic circuitry design - November 7th, 2009 [November 7th, 2009]
- hvac - November 7th, 2009 [November 7th, 2009]
- Unfinalized video miniDVD data recovery - November 7th, 2009 [November 7th, 2009]
- eletronics - November 7th, 2009 [November 7th, 2009]
- codless phones programming - November 7th, 2009 [November 7th, 2009]
- Effectiveness in cooling a drink with ice than water? - November 7th, 2009 [November 7th, 2009]
- Free Vibration Analysis of Tapered Composite Wings - November 8th, 2009 [November 8th, 2009]
- Can You Treat Composite Beams or Wings Mathematically like Isotropic Wings? - November 8th, 2009 [November 8th, 2009]
- Particle, Particle in Space, Tell Me About Earthquakes - November 8th, 2009 [November 8th, 2009]
- Russian Rocket Engine – Best in the World - November 8th, 2009 [November 8th, 2009]
- New Online Evaluation of Laminated Composite Stiffnesses - November 8th, 2009 [November 8th, 2009]
- 'Autonomous' helicopters teach themselves to fly - November 8th, 2009 [November 8th, 2009]
- Next Target – Jupiter - November 8th, 2009 [November 8th, 2009]
- NASA's FERMI, Space, and Time - November 8th, 2009 [November 8th, 2009]
- Lunchtime Salon Today in L.A. - November 8th, 2009 [November 8th, 2009]
- A vote for McCain is a vote against science - November 8th, 2009 [November 8th, 2009]
- NASA Study Investigates Mental Overload in Pilots - November 8th, 2009 [November 8th, 2009]
- NASA Releases Columbia Crew Safety Report - November 8th, 2009 [November 8th, 2009]
- What the Stimulus Package Means for Science - November 8th, 2009 [November 8th, 2009]
- All Scientists Have Conflicts of Interest (Duh) - November 8th, 2009 [November 8th, 2009]
- Congress Considers Killing Open-Access Journals - November 8th, 2009 [November 8th, 2009]
- Transmission Swing Angle - December 12th, 2009 [December 12th, 2009]
- Long Weld Neck Flanges - December 12th, 2009 [December 12th, 2009]
- Super Critical Fluid Extraction for Rose Oil - December 12th, 2009 [December 12th, 2009]
- Capacitor Bank Calculations - December 12th, 2009 [December 12th, 2009]
- Power Supplies and Dummy Loads - December 12th, 2009 [December 12th, 2009]
- Standards for Piping Vibration - December 12th, 2009 [December 12th, 2009]
- Automatic Generator Changovers - December 12th, 2009 [December 12th, 2009]
- Synchronous Generators - December 12th, 2009 [December 12th, 2009]
- Suzuki Swift Brakes - Squeaks and Whistles - December 12th, 2009 [December 12th, 2009]
- Flange Serration - December 12th, 2009 [December 12th, 2009]
- Hydraulic Shapes and Reciprocating Machines - December 12th, 2009 [December 12th, 2009]
- No Shortage of Engineers After All! - December 12th, 2009 [December 12th, 2009]
- Delta Starter Diagram - December 12th, 2009 [December 12th, 2009]
- 2002 Chevy Duramax Diesel - Low Voltmeter Reading - December 12th, 2009 [December 12th, 2009]
- Energy Survey and Consumer Mapping Methodoogy - December 12th, 2009 [December 12th, 2009]
- Setback for Geothermal Energy - December 12th, 2009 [December 12th, 2009]
- Darlington Amplifier - December 12th, 2009 [December 12th, 2009]
- Diesel Storage Tank Design - December 12th, 2009 [December 12th, 2009]
- Car MPG Questions - December 12th, 2009 [December 12th, 2009]
- Dark LCD Display - December 12th, 2009 [December 12th, 2009]
- Calculating the Strength of Concrete Floors - December 12th, 2009 [December 12th, 2009]
- Hitachi Projection TV - December 12th, 2009 [December 12th, 2009]
- WW II Water-Injected Engines - December 12th, 2009 [December 12th, 2009]
- Soap to Prevent A1H1N1 Contamination - December 12th, 2009 [December 12th, 2009]
- Car won't shift out of first gear - December 12th, 2009 [December 12th, 2009]