DUBLIN--(BUSINESS WIRE)--The "Composites in the Aerospace Market Report: Trends, Forecast and Competitive Analysis" report has been added to ResearchAndMarkets.com's offering.
The future of the global aerospace composite materials market looks promising with opportunities in commercial aircraft, regional aircraft, general aviation, helicopter, and military aircraft markets.
The global aerospace composites materials market is expected to decline in 2020 due to global economic recession led by COVID-19. However, market will witness recovery in the year 2021 and it is expected to reach an estimated $3.3 billion by 2025 with a CAGR of 5% to 7% from 2020 to 2025. The major drivers for this market are growing demand for lightweight materials to increase fuel efficiency and growth of aircraft with high composites penetration such B787 and A350WXB.
An emerging trend, which has a direct impact on the dynamics of the industry, includes the recycling of advanced composites. Some of the aerospace composite materials companies profiled in this report include Hexcel, Cytec Solvay Group, Toray, Gurit, and Teijin.
The study includes a forecast of the growth opportunities for the composites in the global aerospace market by aircraft type, reinforcement type, manufacturing process, type of structure, component and region.
In this market, carbon fiber, glass fiber, and aramid fiber are used to fabricate various aircraft components. On the basis of comprehensive research, it is forecast that carbon fiber based composites will remain the largest market during the forecast period. Increasing penetration of carbon composites in commercial aircraft, such as B787 and A350XWB is expected to drive the demand for this segment over the forecast period from 2020 to 2025.
Within the aerospace composites market, commercial aircraft will remain the largest market by value and volume consumption followed by military aircraft.
By type of structure, primary structure will remain the largest market by value and volume due to higher composite consumption.
North America will remain the largest region during the forecast period due to a higher demand for newer aircraft and the ongoing replacement of an aging fleet.
Features of the report include:
This report answers following 11 key questions
Q. 1. How big are the opportunities for composites in the global aerospace market by aircraft type (commercial aircraft, regional aircraft, general aviation, helicopter, military aircraft, others), by reinforcement type (carbon composites, glass composites, aramid composites, others), manufacturing process (hand lay-up, AFP/ATL, RTM, injection molding, compression molding, others), type of structure (primary structure interior, engine, others), component (wing, fuselage, empennage, engine, interior, rotor blade, radome, landing gear, others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
Q. 2. Which product segments will grow at a faster pace and why?
Q. 3. Which region will grow at a faster pace and why?
Q.4. What are the key factors affecting market dynamics? What are the drivers, challenges, and business risks in this market?
Q.5. What are the business risks and competitive threats in this market?
Q.6. What are the emerging trends in this market and the reasons behind them?
Q.7. What are some of the changing demands of customers in the market?
Q.8. What are the new developments in the market and which companies are leading these developments?
Q.9. Who are the major players in this market? What strategic initiatives are being taken by key companies for business growth?
Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by product substitution?
Q. 11. What M&A activity has occurred in the last have years and what has its impact been on the industry?"
Key Topics Covered
1. Executive Summary
2. Aerospace Market Analysis
2.1. Macro-Level Comparative Economic Analysis
2.2. Supply Chain
2.3. Global Aerospace Market Overview
2.4. Regional Analysis
2.5. Recent Trends in the Global Aerospace Market
2.6. Forecast for the Global Aerospace Market
3. Commercial Aerospace Market Analysis
3.1. Overview of the Commercial Aerospace Market
3.2. Commercial Aerospace Market Size
3.2.1. Narrow-Body Aircraft
3.2.2. Wide-Body Aircraft
3.3. Market Leaders and Market Share
3.4. Commercial Aerospace Market Trends
3.4.1. Narrow-Body Aircraft
3.4.2. Wide-Body Aircraft
3.5. Commercial Aerospace Market Forecast
4. Regional Aircraft Market Analysis
4.1. Overview of the Regional Aircraft Market
4.2. Regional Aircraft Market Size
4.3. Market Leaders and Market Shares
4.4. Regional Aircraft Market Trends
4.5. Regional Aircraft Market Forecast
5. General Aviation Market Analysis
5.1. Overview of the General Aviation Market
5.2. General Aviation Market Size
5.2.1. Piston Aircraft
5.2.2. Turboprop Aircraft
5.2.3. Business Jet Aircraft
5.3. General Aviation Market Trends
5.4. General Aviation Market Forecast
6. Helicopter Market Analysis
6.1. Overview of the Helicopter Market
6.2. Helicopter Market Size
6.3. Market Leaders
6.3.1. Civil Helicopter Market
6.3.2. Military Helicopter Market
6.4. Helicopter Market Trends
6.5. Helicopter Market Forecast
7. Military Aircraft Market Analysis
7.1. Overview of the Military Aircraft Market
7.2. Military Aircraft Market Size
7.3. Military Aircraft Market Trends
7.4. Military Aircraft Market Forecast
8. Manufacturing Process Analysis
8.1. Overview
8.1.1. Hand Lay-Up
8.1.2. ATP and AFP
8.1.3. Filament Winding
8.1.4. Injection Molding
8.1.5. Compression Molding
8.1.6. Resin Transfer Molding (RTM)
8.1.7. Roll Wrapping
8.2. Market Size by Manufacturing Process
8.3. Commercial Aircraft Manufacturing Process
8.4. General Aircraft Manufacturing Process
8.5. Helicopter Manufacturing Process
8.6. Military Aircraft Manufacturing Process
9. Evolution of Composite Applications in the Global Aerospace Market
9.1. Evolution of Composite Applications
10. Composite Applications in the Global Aerospace Market
10.1. Application of Composites in the Commercial Aircraft Market
10.2. Application of Composites in Regional Aircraft
10.3. Application of Composites in General Aviation
10.4. Application of Composites in Helicopters
10.5. Application of Composites in Defense
10.6. Application of Composites in Space
11. Composite Material Market Analysis
11.1. Overview of Composite Materials
11.2. Business Issues with Composite Materials
11.3. Buy and Fly Weight Analysis
11.4. Composite Shipments by Raw Material Type
11.5. Composite Shipments by Market Segment
11.5.1. Composite Materials in the Commercial Aerospace Market
11.5.2. Composite Materials in the Regional Aircraft Market
11.5.3. Composite Materials in the General Aviation Market
Read more from the original source:
- why can't i print in the message area? - November 7th, 2009 [November 7th, 2009]
- smoke detectors - November 7th, 2009 [November 7th, 2009]
- Insulation drawings - November 7th, 2009 [November 7th, 2009]
- Boiler. - November 7th, 2009 [November 7th, 2009]
- Electrical Harmonics - November 7th, 2009 [November 7th, 2009]
- axial thrust - November 7th, 2009 [November 7th, 2009]
- Pl inform which make suitable for this specification - November 7th, 2009 [November 7th, 2009]
- CapsLock - November 7th, 2009 [November 7th, 2009]
- How to Calculate Drag Reduction Factor for surge analysis - November 7th, 2009 [November 7th, 2009]
- cable..pls help - November 7th, 2009 [November 7th, 2009]
- 11Kv joints - November 7th, 2009 [November 7th, 2009]
- how to calculate required torque? - November 7th, 2009 [November 7th, 2009]
- IP rating for enclosures - November 7th, 2009 [November 7th, 2009]
- 11kv JOINTS SPACING ON PARALLEL CABLES - November 7th, 2009 [November 7th, 2009]
- beep sounds - November 7th, 2009 [November 7th, 2009]
- Increse speed of pneumatic cylinder - November 7th, 2009 [November 7th, 2009]
- Pipe fittings-Manufacturing/Quality Assurance - November 7th, 2009 [November 7th, 2009]
- kango memolition hammer - November 7th, 2009 [November 7th, 2009]
- Loss calculation in undergound Transmission Cables - November 7th, 2009 [November 7th, 2009]
- Design in ASP.NET - November 7th, 2009 [November 7th, 2009]
- axial pump - November 7th, 2009 [November 7th, 2009]
- Auger bit - November 7th, 2009 [November 7th, 2009]
- Pipe - November 7th, 2009 [November 7th, 2009]
- Centrifugal oil filter ideas - November 7th, 2009 [November 7th, 2009]
- When to install Horizontal Condensate Pot (Probably also called Spun Type) ?? - November 7th, 2009 [November 7th, 2009]
- Confusion about a Resistance Bulb - November 7th, 2009 [November 7th, 2009]
- Loop testing for a NON-HART 4 wire instrument - November 7th, 2009 [November 7th, 2009]
- My VAWT Project, next phase - November 7th, 2009 [November 7th, 2009]
- voltage doubler - November 7th, 2009 [November 7th, 2009]
- How to build corners and joints using Red Oak timbers? - November 7th, 2009 [November 7th, 2009]
- THERMAL OIL BOILER - November 7th, 2009 [November 7th, 2009]
- How Do You Get a Degree in Green Energy? - November 7th, 2009 [November 7th, 2009]
- deareator pegging - November 7th, 2009 [November 7th, 2009]
- 99 ford ranger with no brake pedal at all - November 7th, 2009 [November 7th, 2009]
- CAD tool for electronic circuitry design - November 7th, 2009 [November 7th, 2009]
- hvac - November 7th, 2009 [November 7th, 2009]
- Unfinalized video miniDVD data recovery - November 7th, 2009 [November 7th, 2009]
- eletronics - November 7th, 2009 [November 7th, 2009]
- codless phones programming - November 7th, 2009 [November 7th, 2009]
- Effectiveness in cooling a drink with ice than water? - November 7th, 2009 [November 7th, 2009]
- Free Vibration Analysis of Tapered Composite Wings - November 8th, 2009 [November 8th, 2009]
- Can You Treat Composite Beams or Wings Mathematically like Isotropic Wings? - November 8th, 2009 [November 8th, 2009]
- Particle, Particle in Space, Tell Me About Earthquakes - November 8th, 2009 [November 8th, 2009]
- Russian Rocket Engine – Best in the World - November 8th, 2009 [November 8th, 2009]
- New Online Evaluation of Laminated Composite Stiffnesses - November 8th, 2009 [November 8th, 2009]
- 'Autonomous' helicopters teach themselves to fly - November 8th, 2009 [November 8th, 2009]
- Next Target – Jupiter - November 8th, 2009 [November 8th, 2009]
- NASA's FERMI, Space, and Time - November 8th, 2009 [November 8th, 2009]
- Lunchtime Salon Today in L.A. - November 8th, 2009 [November 8th, 2009]
- A vote for McCain is a vote against science - November 8th, 2009 [November 8th, 2009]
- NASA Study Investigates Mental Overload in Pilots - November 8th, 2009 [November 8th, 2009]
- NASA Releases Columbia Crew Safety Report - November 8th, 2009 [November 8th, 2009]
- What the Stimulus Package Means for Science - November 8th, 2009 [November 8th, 2009]
- All Scientists Have Conflicts of Interest (Duh) - November 8th, 2009 [November 8th, 2009]
- Congress Considers Killing Open-Access Journals - November 8th, 2009 [November 8th, 2009]
- Transmission Swing Angle - December 12th, 2009 [December 12th, 2009]
- Long Weld Neck Flanges - December 12th, 2009 [December 12th, 2009]
- Super Critical Fluid Extraction for Rose Oil - December 12th, 2009 [December 12th, 2009]
- Capacitor Bank Calculations - December 12th, 2009 [December 12th, 2009]
- Power Supplies and Dummy Loads - December 12th, 2009 [December 12th, 2009]
- Standards for Piping Vibration - December 12th, 2009 [December 12th, 2009]
- Automatic Generator Changovers - December 12th, 2009 [December 12th, 2009]
- Synchronous Generators - December 12th, 2009 [December 12th, 2009]
- Suzuki Swift Brakes - Squeaks and Whistles - December 12th, 2009 [December 12th, 2009]
- Flange Serration - December 12th, 2009 [December 12th, 2009]
- Hydraulic Shapes and Reciprocating Machines - December 12th, 2009 [December 12th, 2009]
- No Shortage of Engineers After All! - December 12th, 2009 [December 12th, 2009]
- Delta Starter Diagram - December 12th, 2009 [December 12th, 2009]
- 2002 Chevy Duramax Diesel - Low Voltmeter Reading - December 12th, 2009 [December 12th, 2009]
- Energy Survey and Consumer Mapping Methodoogy - December 12th, 2009 [December 12th, 2009]
- Setback for Geothermal Energy - December 12th, 2009 [December 12th, 2009]
- Darlington Amplifier - December 12th, 2009 [December 12th, 2009]
- Diesel Storage Tank Design - December 12th, 2009 [December 12th, 2009]
- Car MPG Questions - December 12th, 2009 [December 12th, 2009]
- Dark LCD Display - December 12th, 2009 [December 12th, 2009]
- Calculating the Strength of Concrete Floors - December 12th, 2009 [December 12th, 2009]
- Hitachi Projection TV - December 12th, 2009 [December 12th, 2009]
- WW II Water-Injected Engines - December 12th, 2009 [December 12th, 2009]
- Soap to Prevent A1H1N1 Contamination - December 12th, 2009 [December 12th, 2009]
- Car won't shift out of first gear - December 12th, 2009 [December 12th, 2009]