BOULDER, Colo. - The Ball Aerospace & Technologies Corp. Global Precipitation Measurement (GPM) Microwave Imager (GMI) successfully launched on NASA's GPM Core Observatory satellite from Tanegashima Space Center, Japan at 1:37 p.m. EST on Feb. 27, 2014. The satellite flew onboard an H-IIA launch vehicle.
Built for NASA, Ball's GMI is a multi-channel, conical-scanning microwave radiometer that flies aboard the GPM Core Observatory. GMI is an essential part of an international satellite mission that will capture next-generation observations of rain and snow worldwide every three hours. The GPM Core Observatory will deliver unprecedented 3-D views of hurricanes and snowstorms and contribute to monitoring and forecasting weather events such as droughts, floods and landslides.
"GMI will provide significantly more accurate data to forecasters tracking extreme weather," said Ball Aerospace President Rob Strain. "GMI's greater accuracy will also enhance the global precipitation dataset used by the world's scientists."
The Ball Aerospace GMI, will deliver more frequent and higher quality data collection than currently available. The eight-foot tall GMI instrument rotates at 32 revolutions per minute and uses four extremely stable calibration points on each revolution to calibrate the data it scans. The instrument minimizes solar intrusion for added accuracy and features higher frequency channels to measure smaller particles of precipitation such as light rain and snow.
GMI will fly aboard the GPM Core Observatory satellite with the Japan Aerospace Exploration Agency's (JAXA-s) Dual-frequency Precipitation Radar (DPR) instrument. The GMI captures precipitation intensities and horizontal patterns, while the DPR provides insights into the three dimensional structure of rain, snow and other precipitation particles. Together, these two instruments will provide a database of measurements that will be used with observations of other partner satellites to upgrade the quality of all collected data and to provide uniform precipitation estimates everywhere in the world every three hours.
GMI's design is based on successful microwave sensors built previously by Ball Aerospace, including the Shuttle Radar Topography Mission (SRTM), the Spaceborne Imaging Radar-C (SIR-C), the GEOSAT Follow-On (GFO-2) and the Submillimeter Wave Astronomy Satellite (SWAS).
The company is currently performing risk reduction work for the U.S. Air Force on the Defense Weather Satellite Follow-On microwave sounding and imaging instrument. This sensor will greatly leverage the advanced design and hardware of the GMI instrument to measure tropical cyclone intensity, sea ice, soil moisture and ocean surface vector winds for military forecasting.
Ball Aerospace & Technologies Corp. supports critical missions for national agencies such as the Department of Defense, NASA, NOAA and other U.S. government and commercial entities. The company develops and manufactures spacecraft, advanced instruments and sensors, components, data exploitation systems and RF solutions for strategic, tactical and scientific applications. For more information, visit http://www.ballaerospace.com/.
Ball Corporation (NYSE: BLL) supplies innovative, sustainable packaging solutions for beverage, food and household products customers, as well as aerospace and other technologies and services primarily for the U.S. government. Ball Corporation and its subsidiaries employ 14,500 people worldwide and reported 2013 sales of $8.5 billion. For more information, visit http://www.ball.com, or connect with us on Facebook or Twitter.
Source Ball Aerospace & Technologies Corp.
More:
Ball Aerospace-Built GMI Instrument Launches Aboard NASA's Global Precipitation Measurement ...
- why can't i print in the message area? - November 7th, 2009 [November 7th, 2009]
- smoke detectors - November 7th, 2009 [November 7th, 2009]
- Insulation drawings - November 7th, 2009 [November 7th, 2009]
- Boiler. - November 7th, 2009 [November 7th, 2009]
- Electrical Harmonics - November 7th, 2009 [November 7th, 2009]
- axial thrust - November 7th, 2009 [November 7th, 2009]
- Pl inform which make suitable for this specification - November 7th, 2009 [November 7th, 2009]
- CapsLock - November 7th, 2009 [November 7th, 2009]
- How to Calculate Drag Reduction Factor for surge analysis - November 7th, 2009 [November 7th, 2009]
- cable..pls help - November 7th, 2009 [November 7th, 2009]
- 11Kv joints - November 7th, 2009 [November 7th, 2009]
- how to calculate required torque? - November 7th, 2009 [November 7th, 2009]
- IP rating for enclosures - November 7th, 2009 [November 7th, 2009]
- 11kv JOINTS SPACING ON PARALLEL CABLES - November 7th, 2009 [November 7th, 2009]
- beep sounds - November 7th, 2009 [November 7th, 2009]
- Increse speed of pneumatic cylinder - November 7th, 2009 [November 7th, 2009]
- Pipe fittings-Manufacturing/Quality Assurance - November 7th, 2009 [November 7th, 2009]
- kango memolition hammer - November 7th, 2009 [November 7th, 2009]
- Loss calculation in undergound Transmission Cables - November 7th, 2009 [November 7th, 2009]
- Design in ASP.NET - November 7th, 2009 [November 7th, 2009]
- axial pump - November 7th, 2009 [November 7th, 2009]
- Auger bit - November 7th, 2009 [November 7th, 2009]
- Pipe - November 7th, 2009 [November 7th, 2009]
- Centrifugal oil filter ideas - November 7th, 2009 [November 7th, 2009]
- When to install Horizontal Condensate Pot (Probably also called Spun Type) ?? - November 7th, 2009 [November 7th, 2009]
- Confusion about a Resistance Bulb - November 7th, 2009 [November 7th, 2009]
- Loop testing for a NON-HART 4 wire instrument - November 7th, 2009 [November 7th, 2009]
- My VAWT Project, next phase - November 7th, 2009 [November 7th, 2009]
- voltage doubler - November 7th, 2009 [November 7th, 2009]
- How to build corners and joints using Red Oak timbers? - November 7th, 2009 [November 7th, 2009]
- THERMAL OIL BOILER - November 7th, 2009 [November 7th, 2009]
- How Do You Get a Degree in Green Energy? - November 7th, 2009 [November 7th, 2009]
- deareator pegging - November 7th, 2009 [November 7th, 2009]
- 99 ford ranger with no brake pedal at all - November 7th, 2009 [November 7th, 2009]
- CAD tool for electronic circuitry design - November 7th, 2009 [November 7th, 2009]
- hvac - November 7th, 2009 [November 7th, 2009]
- Unfinalized video miniDVD data recovery - November 7th, 2009 [November 7th, 2009]
- eletronics - November 7th, 2009 [November 7th, 2009]
- codless phones programming - November 7th, 2009 [November 7th, 2009]
- Effectiveness in cooling a drink with ice than water? - November 7th, 2009 [November 7th, 2009]
- Free Vibration Analysis of Tapered Composite Wings - November 8th, 2009 [November 8th, 2009]
- Can You Treat Composite Beams or Wings Mathematically like Isotropic Wings? - November 8th, 2009 [November 8th, 2009]
- Particle, Particle in Space, Tell Me About Earthquakes - November 8th, 2009 [November 8th, 2009]
- Russian Rocket Engine – Best in the World - November 8th, 2009 [November 8th, 2009]
- New Online Evaluation of Laminated Composite Stiffnesses - November 8th, 2009 [November 8th, 2009]
- 'Autonomous' helicopters teach themselves to fly - November 8th, 2009 [November 8th, 2009]
- Next Target – Jupiter - November 8th, 2009 [November 8th, 2009]
- NASA's FERMI, Space, and Time - November 8th, 2009 [November 8th, 2009]
- Lunchtime Salon Today in L.A. - November 8th, 2009 [November 8th, 2009]
- A vote for McCain is a vote against science - November 8th, 2009 [November 8th, 2009]
- NASA Study Investigates Mental Overload in Pilots - November 8th, 2009 [November 8th, 2009]
- NASA Releases Columbia Crew Safety Report - November 8th, 2009 [November 8th, 2009]
- What the Stimulus Package Means for Science - November 8th, 2009 [November 8th, 2009]
- All Scientists Have Conflicts of Interest (Duh) - November 8th, 2009 [November 8th, 2009]
- Congress Considers Killing Open-Access Journals - November 8th, 2009 [November 8th, 2009]
- Transmission Swing Angle - December 12th, 2009 [December 12th, 2009]
- Long Weld Neck Flanges - December 12th, 2009 [December 12th, 2009]
- Super Critical Fluid Extraction for Rose Oil - December 12th, 2009 [December 12th, 2009]
- Capacitor Bank Calculations - December 12th, 2009 [December 12th, 2009]
- Power Supplies and Dummy Loads - December 12th, 2009 [December 12th, 2009]
- Standards for Piping Vibration - December 12th, 2009 [December 12th, 2009]
- Automatic Generator Changovers - December 12th, 2009 [December 12th, 2009]
- Synchronous Generators - December 12th, 2009 [December 12th, 2009]
- Suzuki Swift Brakes - Squeaks and Whistles - December 12th, 2009 [December 12th, 2009]
- Flange Serration - December 12th, 2009 [December 12th, 2009]
- Hydraulic Shapes and Reciprocating Machines - December 12th, 2009 [December 12th, 2009]
- No Shortage of Engineers After All! - December 12th, 2009 [December 12th, 2009]
- Delta Starter Diagram - December 12th, 2009 [December 12th, 2009]
- 2002 Chevy Duramax Diesel - Low Voltmeter Reading - December 12th, 2009 [December 12th, 2009]
- Energy Survey and Consumer Mapping Methodoogy - December 12th, 2009 [December 12th, 2009]
- Setback for Geothermal Energy - December 12th, 2009 [December 12th, 2009]
- Darlington Amplifier - December 12th, 2009 [December 12th, 2009]
- Diesel Storage Tank Design - December 12th, 2009 [December 12th, 2009]
- Car MPG Questions - December 12th, 2009 [December 12th, 2009]
- Dark LCD Display - December 12th, 2009 [December 12th, 2009]
- Calculating the Strength of Concrete Floors - December 12th, 2009 [December 12th, 2009]
- Hitachi Projection TV - December 12th, 2009 [December 12th, 2009]
- WW II Water-Injected Engines - December 12th, 2009 [December 12th, 2009]
- Soap to Prevent A1H1N1 Contamination - December 12th, 2009 [December 12th, 2009]
- Car won't shift out of first gear - December 12th, 2009 [December 12th, 2009]