February 21, 2014 - As part of its Executive Insights Series, AeroDef Manufacturing Summit and Exposition 2014 will include "3D Modeling in Manufacturing: The Changing Aerospace and Defense Supply Chain and the Digital Innovation Imperative" panel discussionon February 27. Panelists will discuss similarities between aerospace and defense industry as well as automotive supply chain transformation of last century and more. Dr. Al Sanders, president and CEO of Design-Vantage Technologies, LLC, will moderate. SME 1 SME Dr., P.O. Box 930 Dearborn, MI, 48121 USA Press release date: February 18, 2014
DEARBORN, Mich. AeroDef Manufacturing Summit and Exposition 2014 will include a panel discussion, 3D Modeling in Manufacturing: The Changing Aerospace and Defense Supply Chain and the Digital Innovation Imperative, on Thursday, February 27, as part of its Executive Insights Series.
AeroDef Manufacturing, takes place February 2527, 2014, at the Long Beach (Calif.) Convention Center. It is produced by SME in partnership and the largest OEMs to integrate the industrys distributed and diverse supply chain, drive innovation and increase productivity.
Panelists will discuss the similarities between todays aerospace and defense industry and the automotive supply chain transformation of the last century; the role of 3D digital enabled technologies in the transformation and growth of the global aerospace and defense industry; strategies used by other countries to use advanced manufacturing technology to compete in the global marketplace; the challenges of integrating 3D modeling and simulation technologies into small, medium and large manufacturing enterprises; and the role of America Makes, the National Additive Manufacturing Innovation Institutes, in the digital innovation imperative.
The panel is moderated by Dr. Al Sanders, president and CEO Design-Vantage Technologies, LLC. Other panelists include:
Gabriel Burnett, operations research engineer, Boeing Research and Technology, The Boeing Company Michael Grieves, consultant, NASA Jon Riley, vice president, digital manufacturing, National Center for Manufacturing Sciences Mark Zic, business development manager, Dynomax Inc.
In addition to the panel, attendees can visit the Additive Manufacturing/3D Printing Resource Center parts produced by major technologies, including stereolithography, laser sintering and fused deposition modeling. Todd Grimm, an influential author, speaker and consultant on additive manufacturing/3D printing, will host the center and present afternoon and morning sessions on each day of the three-day exposition. Sessions will provide attendees with both tactical and strategic information for incorporating additive manufacturing technology into their own operations.
The panels, resource center, speakers and networking events are complimentary to those who register by February 21. Register at aerodefevent.com. Join our Twitter group @AeroDefMfg and our LinkedIn group to learn details about AeroDef as they unfold, including keynote speakers, panels and sponsorship opportunities for exhibitors.
Note to Media: Visit the SME Media Center for the latest news, one-stop access to SME Events, Manufacturing Quick links, SME social media sites, SME News Feed and more. Qualified members of the news media can register for AeroDef Manufacturing here.
About AeroDef Manufacturing AeroDef Manufacturing is the leading technical conference and exposition for the aerospace and defense manufacturing industry. Produced by SME in partnership with leading industry OEMs, its mission is to foster innovation across the extended enterprise to reduce costs, expedite production times and maintain U.S. competitiveness in the global economy.
Go here to see the original:
3D Modeling in Aerospace & Defense Manufacturing Panel Discussion Announced for ...
- why can't i print in the message area? - November 7th, 2009 [November 7th, 2009]
- smoke detectors - November 7th, 2009 [November 7th, 2009]
- Insulation drawings - November 7th, 2009 [November 7th, 2009]
- Boiler. - November 7th, 2009 [November 7th, 2009]
- Electrical Harmonics - November 7th, 2009 [November 7th, 2009]
- axial thrust - November 7th, 2009 [November 7th, 2009]
- Pl inform which make suitable for this specification - November 7th, 2009 [November 7th, 2009]
- CapsLock - November 7th, 2009 [November 7th, 2009]
- How to Calculate Drag Reduction Factor for surge analysis - November 7th, 2009 [November 7th, 2009]
- cable..pls help - November 7th, 2009 [November 7th, 2009]
- 11Kv joints - November 7th, 2009 [November 7th, 2009]
- how to calculate required torque? - November 7th, 2009 [November 7th, 2009]
- IP rating for enclosures - November 7th, 2009 [November 7th, 2009]
- 11kv JOINTS SPACING ON PARALLEL CABLES - November 7th, 2009 [November 7th, 2009]
- beep sounds - November 7th, 2009 [November 7th, 2009]
- Increse speed of pneumatic cylinder - November 7th, 2009 [November 7th, 2009]
- Pipe fittings-Manufacturing/Quality Assurance - November 7th, 2009 [November 7th, 2009]
- kango memolition hammer - November 7th, 2009 [November 7th, 2009]
- Loss calculation in undergound Transmission Cables - November 7th, 2009 [November 7th, 2009]
- Design in ASP.NET - November 7th, 2009 [November 7th, 2009]
- axial pump - November 7th, 2009 [November 7th, 2009]
- Auger bit - November 7th, 2009 [November 7th, 2009]
- Pipe - November 7th, 2009 [November 7th, 2009]
- Centrifugal oil filter ideas - November 7th, 2009 [November 7th, 2009]
- When to install Horizontal Condensate Pot (Probably also called Spun Type) ?? - November 7th, 2009 [November 7th, 2009]
- Confusion about a Resistance Bulb - November 7th, 2009 [November 7th, 2009]
- Loop testing for a NON-HART 4 wire instrument - November 7th, 2009 [November 7th, 2009]
- My VAWT Project, next phase - November 7th, 2009 [November 7th, 2009]
- voltage doubler - November 7th, 2009 [November 7th, 2009]
- How to build corners and joints using Red Oak timbers? - November 7th, 2009 [November 7th, 2009]
- THERMAL OIL BOILER - November 7th, 2009 [November 7th, 2009]
- How Do You Get a Degree in Green Energy? - November 7th, 2009 [November 7th, 2009]
- deareator pegging - November 7th, 2009 [November 7th, 2009]
- 99 ford ranger with no brake pedal at all - November 7th, 2009 [November 7th, 2009]
- CAD tool for electronic circuitry design - November 7th, 2009 [November 7th, 2009]
- hvac - November 7th, 2009 [November 7th, 2009]
- Unfinalized video miniDVD data recovery - November 7th, 2009 [November 7th, 2009]
- eletronics - November 7th, 2009 [November 7th, 2009]
- codless phones programming - November 7th, 2009 [November 7th, 2009]
- Effectiveness in cooling a drink with ice than water? - November 7th, 2009 [November 7th, 2009]
- Free Vibration Analysis of Tapered Composite Wings - November 8th, 2009 [November 8th, 2009]
- Can You Treat Composite Beams or Wings Mathematically like Isotropic Wings? - November 8th, 2009 [November 8th, 2009]
- Particle, Particle in Space, Tell Me About Earthquakes - November 8th, 2009 [November 8th, 2009]
- Russian Rocket Engine – Best in the World - November 8th, 2009 [November 8th, 2009]
- New Online Evaluation of Laminated Composite Stiffnesses - November 8th, 2009 [November 8th, 2009]
- 'Autonomous' helicopters teach themselves to fly - November 8th, 2009 [November 8th, 2009]
- Next Target – Jupiter - November 8th, 2009 [November 8th, 2009]
- NASA's FERMI, Space, and Time - November 8th, 2009 [November 8th, 2009]
- Lunchtime Salon Today in L.A. - November 8th, 2009 [November 8th, 2009]
- A vote for McCain is a vote against science - November 8th, 2009 [November 8th, 2009]
- NASA Study Investigates Mental Overload in Pilots - November 8th, 2009 [November 8th, 2009]
- NASA Releases Columbia Crew Safety Report - November 8th, 2009 [November 8th, 2009]
- What the Stimulus Package Means for Science - November 8th, 2009 [November 8th, 2009]
- All Scientists Have Conflicts of Interest (Duh) - November 8th, 2009 [November 8th, 2009]
- Congress Considers Killing Open-Access Journals - November 8th, 2009 [November 8th, 2009]
- Transmission Swing Angle - December 12th, 2009 [December 12th, 2009]
- Long Weld Neck Flanges - December 12th, 2009 [December 12th, 2009]
- Super Critical Fluid Extraction for Rose Oil - December 12th, 2009 [December 12th, 2009]
- Capacitor Bank Calculations - December 12th, 2009 [December 12th, 2009]
- Power Supplies and Dummy Loads - December 12th, 2009 [December 12th, 2009]
- Standards for Piping Vibration - December 12th, 2009 [December 12th, 2009]
- Automatic Generator Changovers - December 12th, 2009 [December 12th, 2009]
- Synchronous Generators - December 12th, 2009 [December 12th, 2009]
- Suzuki Swift Brakes - Squeaks and Whistles - December 12th, 2009 [December 12th, 2009]
- Flange Serration - December 12th, 2009 [December 12th, 2009]
- Hydraulic Shapes and Reciprocating Machines - December 12th, 2009 [December 12th, 2009]
- No Shortage of Engineers After All! - December 12th, 2009 [December 12th, 2009]
- Delta Starter Diagram - December 12th, 2009 [December 12th, 2009]
- 2002 Chevy Duramax Diesel - Low Voltmeter Reading - December 12th, 2009 [December 12th, 2009]
- Energy Survey and Consumer Mapping Methodoogy - December 12th, 2009 [December 12th, 2009]
- Setback for Geothermal Energy - December 12th, 2009 [December 12th, 2009]
- Darlington Amplifier - December 12th, 2009 [December 12th, 2009]
- Diesel Storage Tank Design - December 12th, 2009 [December 12th, 2009]
- Car MPG Questions - December 12th, 2009 [December 12th, 2009]
- Dark LCD Display - December 12th, 2009 [December 12th, 2009]
- Calculating the Strength of Concrete Floors - December 12th, 2009 [December 12th, 2009]
- Hitachi Projection TV - December 12th, 2009 [December 12th, 2009]
- WW II Water-Injected Engines - December 12th, 2009 [December 12th, 2009]
- Soap to Prevent A1H1N1 Contamination - December 12th, 2009 [December 12th, 2009]
- Car won't shift out of first gear - December 12th, 2009 [December 12th, 2009]