Surge Analysis is advisable for Gas line ? or only for liquid line.

I am still redoing the brake system on 1948 ford F1, on the rear axel there is a small brass block that the rear brake lines and the main from the master cyl. tie into, I tried to remove it to clean or replace it and found a swivel cap on top of the unit, my question is as follows; is this a balanci

PLease provide the hardness values for different material

Dear Friend

As you know some kind of TV antenna rotate by a rotor .the rotor power is supplied by Main antenna wire (the wire that carry sound and image signals).I am looking for a circuit and description to make a board for this problem. How should you lead me?

It will b

hi freinds,

Can any body tell me the difference between 4.5 digit display and 4 or 3.5 or 3 digit display. what is the maximum count we can measure by these digit display.

can somebody helmpwith materials and books needed for biulding low voltage panels.

hey! I am going through some specification of fuel oil handling system for a thermal power plant.

The scheme uses a main oil tank and a day oil tank.

So, what is the need of the day oil tank? why not use the main oil tank directly for fuel supply?

please help m

why do we mostly use of I section beam instead of other section beam?

hello friends

i am rajan ... i m working in BMS(building management system) now i get a bms project in my concern so i have to creat new logic in bms that is measurement based any bady modal creation of logic and way of think to proced in logic pls help me

thanks

rajan

hello sir .... i wounder u can help me out.

i hve installed a NEW switch gear ...but i hve a problem ... the problem is in previous switch gear.. i had the CAM switch which was used for giving a signal to PLC whenever a Circuit Breaker turn's ON to OFF or from OFF on to ON.

but my

Now my company has the project to recovery vapour vent gas from strorage tank by connecting pipe from out let of breather valve in this case of modification need to setting up pressur of breather valve also we can do it.

information; original setting is 10 mbarg

resetting

Dear Milister

We have installation submarine project at near beach. The seabed profil is coral rock. Pipeline buried 2 meter under seabed.

What is the best method to do the installation? is it pretrenching or continues burying/cutter section dredging (CSD)? is it any other method?

blow down setting boiler safty valves

power plant operations

Is there any person how guide me to calculate the static liquid head in spherical tank?

with thanks

I am making spherical tank calculations according to ASME Div 1, using A516-70 material, I want to know,

what is the Maximum & minimum( As rolled & Normalized ) thickness limits of shell plate according to ASME?

Hav a nice day

Excuse me honourable gentle man,

would you like to explain me control valve operation ? i mean when dcs give 12ma for 50% open in direct action so in far field it follows to open 50% but how could dcs operator or panel operator confirm it open 50%...? plz explain in deatail my dear all if a

Friends,

Here i am posting a question regarding Micro processor based relay in MV Switch gear which is Provided for measurement/Monitoring parameters of HT motors

One of our specifications say that, "For interfacing 33 KV PANEL,6.6KV SWITCHBOARD,PMCC and DG BREAKER PANEL to cont

Do u give solutions for SAP related queries of mine?

Hi there,

We have a 1994 Saturn SL2 with an automatic transmission. It got 124K miles on the odomoter. Everything (transmission wise) seems to work well in Park, Reverse & Drive. When in drive, it smoothly shifts through all the gears without a problem. But, when I drop it down to 2