Lee Products explains how its solenoid valves are used to protect tank pressures in critical aerospace applications.

In the aerospace and aviation industries, pneumatic systems are typically used to control the flows of fuel and other essential fluids for propulsion, thrust, lubrication, isolation, purge and other fluid control applications.

These pneumatic systems are usually supplied by a tank of compressed gas and one of the main challenges of this design is to eliminate the possibility of any leakage (or excess flow) from the tank.

Should this occur its likely the issues would be either shorter system life, or the need to specify a larger tank. In these situations, a solenoid valve which offers the key benefits of zero leakage along with a wide operating pressure range, can be an effective barrier between the tank and the system.

However, engineers will also have to consider other factors which will have a direct impact on the performance of the solenoid valve. For example, various combinations of operating temperatures, material compatibility, power limitations and expected life-cycle all add-up to the complexity of system requirements.

An effective solution

Precision micro-hydraulic specialists, The Lee Company has been at the forefront of fluid control technology since 1948 and offers the smallest solenoid valves on the market. However, more importantly Lees solenoid valves have proven themselves with decades of use in demanding aerospace applications, along with other applications involving harsh conditions ranging from high temperatures and pressures of deep subsea oil wells to the cold and vacuum of outer space.

A good example of this is the ongoing development of its Zero Leak Pneumatic Solenoid Valve, which is has proven to be an ideal barrier for aerospace pneumatic systems. It features a polyimide shaft tip which ensures a bubble tight seal on nitrogen in a package weighing only 2.24 ounces and has a direct acting design which operates without pressure assistance and flows up to 30 SLPM of air at 200 psi differential.

Ultra-compact and energy efficient, the 70-ohm solenoid coil requires less than 4 watts to open the valve and for more demanding applications custom configurations are available with 6,000 psid operating capability, or qualified for over 1 million cycles.

Benefits and potential applications

The valve configuration was initially developed to meet the difficult requirements associated with barrier valves used in space systems, where typically the valve controls flow from a tank upstream of a satellites propulsion system. They are also used in launch vehicles as piloting valves for isolating the pneumatics, whether its for fuel, oxidiser, or helium purge systems as well as being used for controlling thrust vector actuators. Aircraft systems also require barrier valves with deployment on tanks of compressed gas, landing gear or braking systems which can utilise pneumatic back-up systems.

Lee says its zero leak pneumatic solenoid valves are just one example of its range of powerful industry specific products for a wide range of applications. This illustrates a passion for innovation which enables them to help customers solve their toughest fluid control problems.

http://www.theleeco.com/uk

The rest is here:

Rising to the challenge - Aerospace Manufacturing

Northrop Grumman and the United States Navy will pay Bethpage Water District $49 million to treat groundwater contamination.

Taxpayers have been covering the bulk of the cost for clean drinking water access after decades of pollution from Grumman Aerospaces Bethpage facility now Northrop Grumman. The Bethpage Plume is one of Long Islands worst environmental crises dangerous chemicals have spawned a four mile long plume, 900 feet deep in local groundwater.

The water district, which serves about 33,000 people, has built advanced treatment systems to keep two dozen chemicals from reaching the taps.

Once approved, the consent judgment filed on Monday will allow the water district to operate their treatment systems, retire debt from the systems construction, and create a new water well outside of the plume.

Northrop Grumman will contribute about $29 million. And the Navy, which owned a portion of the old manufacturing site, will provide the remaining $20 million.

This is separate from an unfinalized deal announced by former Governor Andrew Cuomo in 2020 that would require the parties pay $406 million to eliminate the plume altogether.

See the article here:

Aerospace facility responsible for polluting Long Island water will pay to help clean it up - WSHU

Sheppard takes a people-first approach to much of his day-to-day operations.

Being a chief engineer, its really about meeting and connecting with the different groups within our team, to make sure Im understanding what different people are working on, and supporting everyone to deliver their analysis and conclusions, he said.

As Im getting more senior, Im trying to do less meetings and be able to talk to people. Im finding that, naturally, its important to communicate with the engineers and the team but also the manufacturing and flight test teams as well.

Integrating the various engineering disciplines and broad multidisciplinary feedback is a real focus of mine.

Sheppard, who was part of the team who constructed the first military aircraft to be built in Australia for 50 years, said he was pleasantly surprised by the rise of Australia-based aerospace projects.

When I started in my career, I was under the impression that big programs were always going to be run out of the US or Europe, he said. The 787 program was a large program here in Australia to recently break that perception.

We developed a new carbon composite material system for the whole wing movable trailing edge, the first composite material system developed by Boeing Commercial outside of the US. The program had a complex design and certification effort, and the ongoing manufacturing has been a big contribution to local industry.

Another fellowship recipient is Dr Yan Yang, the software engineering lead at Boeings advanced prototyping arm Phantom Works International, and an expert in machine learning and complex software systems.

My work includes the development of the state-of-art, deep learning solutions for autonomous systems, she said. My passion is to build reliable, safe and ethical AI systems for the next generation of aerospace engineering products.

Yangs lifelong passion for physics and mathematics initially launched her into a career in manufacturing engineering at Nanjing University of Aeronautics and Astronautics in China. She then made a detour into a rather different field prior to joining Boeing.

I was always fascinated by space from a very young age, she said. But I did not know too much about the real world, so I decided to become a TV journalist.

After three years in journalism, Yang completed a PhD in computer science at the University of Queensland, before starting work at Boeing in 2016.

Read the original here:

A day in the life of an aerospace engineer - Create - create digital

King Aerospace is in the final throes of preparation for the May 1 opening of its expandedMRO facilities at Northwest Arkansas Airport, including the recent completion of testing of the fire-suppression system.

The KACC ARK facility will provide nearly 195,000 sq ft of hangar, engineering, shop, and office space that will accommodate upgrades, maintenance, VIP interior refurbishment, and special mission modifications. Capable of holding multiple widebody aircraft including up to the size of the Boeing 777, the hangars are equipped with LED lighting, technologies for tooling and parts scanning, and advanced, hardy exhaust systems.

In addition, the hangars are fitted with upgraded fire detection provisions using a triple infrared/ultraviolet optical flame detector system that can confirm and respond to the presence of a hydrocarbon-based flame at a long distance. The infrared and ultraviolet sensors work together to detect the heat and UV radiation from hydrocarbon fires. When a fire is verified, the system releases overhead foam water and oscillating monitors. It is designed with a triple-spectrum design to guard against false alarms and can be shut off remotely.

Northwest Arkansas-basedfire detection andmonitoring company Complex Technologies installed the purpose-built, flame-detection systems for early warning. Freedom Fire Pro, a local fire protection service provider,on March 30 tested the system to ensure it meets or exceeds the quick detection, control, and fire extinguishment objectives.

This system has twice the required coverage, providing double the protection and quicker response, says Greg Watson, King Aerospace chief operating officer.

In addition, the facility has also undergone a Defense Contract Management Agency (DCMA) audit to ensure itmeets quality assurance for the mission-critical aircraft work and is transitioning to furnishing the spaces, setting up the shops, and applying finishing touches such as hanging flags and signage, King Aerospace said.

The teamwork and dedication displayed through these complex preparation efforts have been truly inspiring, Steve Sawyer, general manager of operations, said. Everyone associated with airfield operations and the local community have welcomed King Aerospace as family.

Read the original post:

King Aerospace Preps for Opening of Arkansas Expansion - Aviation International News

New York, April 13, 2022 (GLOBE NEWSWIRE) -- The Insight Partners published latest research study on Aerospace Titanium Fasteners Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Aircraft Type (Narrow Body Aircraft, Wide Body Aircraft, General Aviation Aircraft, Cargo Aircraft, Helicopters, and Military Aircraft), Product Type (Bolts, Nuts, Screws, Rivets, and Others), Application (Flight Control Surfaces, Airframes, Engines, Interiors, and Landing Gears), and End User (Aircraft Manufacturers, MRO Service Providers, and Military Forces), the global aerospace titanium fasteners market growth is driven by the increasing adoption in military aircraft, rising development by aerospace titanium fastener manufacturers, and increasing demand by MRO service provider.

Get Exclusive Access to Sample Pages of Aerospace Titanium Fasteners Market Size - COVID-19 Impact and Global Analysis with Strategic Insights at: https://www.theinsightpartners.com/sample/TIPAD00002308/

Aerospace Titanium Fasteners Market: Competitive Landscape and Key DevelopmentsThe key players operating in the aerospace titanium fasteners market include XOT Metals; Leeart Industry Co. Ltd.; B&B Specialties Inc.; 3V Fasteners; LISI Aerospace; Cherry Aerospace; Ferralloy, Inc.; Superbti Co. Ltd.; TriMas Aerospace; and Torqbolt Inc. Various other companies are operating in the market, and are coming up with new technologies and offerings, thereby contributing to the expansion of the aerospace titanium fasteners market, in terms of revenue.

Place Your Inquiry Before Buying: https://www.theinsightpartners.com/inquiry/TIPAD00002308/

In 2021, TriMas signed an agreement to acquire TFI Aerospace to add it to TriMas Aerospace. TFI is a leading manufacturer and supplier of specialty fasteners used in a variety of applications, predominantly in aerospace applications.

In 2021, B&B Speacialties, Inc. participated in International Fastener EXPO 2021, which was held in Las Vegas from September 21, 2021 to September 23, 2021.

The aerospace industry prefers the use of lightweight materials to increase fuel efficiency. Thus, the high demand for titanium fasteners among aircraft OEMs, aircraft component OEMs, and maintenance service providers is catalyzing the aerospace titanium fasteners market. The military aerospace industry is the major adopter of aerospace fasteners, followed by commercial aerospace and general aerospace industries. Titanium fasteners exhibit high-temperature resistance, corrosion resistance, and nonmagnetic nature in military aircraft. Titanium's robust strength and low density provide the high levels of performance desired by aeroengine manufacturers. Its high-temperature capability is suitable for jet engines and airframe parts that must endure temperatures ranging from subzero readings to 600C. According to XOT Metals, titanium is mainly consumed by the military aerospace industry. The F/A-18, F-22, C-17, F-35, and the UH-60 Black Hawk helicopter are among the military aircraft models that use a huge volume of titanium fasteners. Further, military helicopters and UAVs also need higher volumes of titanium fasteners to attain improved operational efficiencies and lower fuel consumption benefits.

Connect with Our Research Analyst On: https://www.theinsightpartners.com/speak-to-analyst/TIPAD00002308

Technological advancements in the aerospace industry have led to the production of newer and more durable aerospace fasteners. Moreover, the increasing adoption of lightweight titanium fasteners in the aerospace industry provides notable opportunities for the aerospace titanium fasteners market players. In 2020, TriMas Aerospace received multi-year contracts from Airbus and signed new supply contracts with the company, which led to a surge in the sales of engineered fasteners of TriMas Aerospace in Europe. Further, the market players manufacture robust titanium fasteners for applications such as airframes, landing gears, engine components, and interiors. With the emphasis on lightweight aircraft models using composite materials and carbon fiber braking systems, the requirement for titanium fasteners will increase in the coming years.

The aerospace titanium fasteners market is segmented on the basis of aircraft type, product type, application, and end user. Based on aircraft type, the market is segmented into narrow-body aircraft, wide-body aircraft, general aviation aircraft, cargo aircraft, helicopters, and military aircraft. Based on product type, the aerospace titanium fasteners market is segmented into bolts, nuts, screws, rivets, and others. Based on application, the market is segmented into flight control surfaces, airframes, engines, interiors, and landing gears. Based on end user, the market is segmented into aircraft manufacturers, MRO service providers, and military forces.

Buy Premium Copy of Aerospace Titanium Fasteners Market Size, Share, Revenue, Strategic Insights and Forecasts 2021-2028 Research Report at: https://www.theinsightpartners.com/buy/TIPAD00002308/

Aerospace Titanium Fasteners Market: Application OverviewOn the basis of application, the aerospace titanium fasteners market is categorized into flight control surfaces, airframe, engines, interiors, and landing gear. The airframe segment led the aerospace titanium fasteners market share by more than 38% in 2020. Airframe is the main frame (or skeleton) of an aircraft which holds and supports the entire aircraft assembly to its attachments. Also it accounts for the largest amount of fasteners in the total fasteners used in an aircraft. The very straight factors that are driving the market for this segment are increasing commercial and military aircraft production and high demand from aftermarket MRO operations across the aerospace industry.

Browse Adjoining Reports:Aerospace Fasteners Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Product Type (Rivets, Screws, Nuts and Bolts, Others); Aircraft Type (Narrow Body Aircraft, Wide Body Aircraft, Others); End User (Commercial Aviation, Defense) and Geography

Aircraft Interior Fasteners Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Aircraft Type (Commercial Aircraft, Military Aircraft); Application Type (Seats, Galleys, Lavatory, Ducts, Stowage Bins, Floor Panel, Others); Fastener Type (Screws, Bolts, Nuts, Potted-in Inserts, Panel Fasteners, Others) and Geography

Aerospace Titanium Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Type (Commercially Pure Titanium, Titanium Alloys); Application (Structural Airframes, Engines, Others) and Geography

Aerospace Titanium Blisk Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Application (Military, Commercial, General Aviation); Diameter (Less than 70 cm, 70 cm - 80 cm, 80 cm - 90 cm) and Geography

Aircraft Radome Market to 2025 - Global Analysis and Forecasts by Design Type (Nose Radome & Fuselage Mounted Radome), Material Type (Glass-Fiber, Resin & Quartz), and Aircraft Type (Commercial Aircrafts & Military Aircrafts)

Military Aircraft Rubber Tanks Market Forecast to 2027 - COVID-19 Impact and Global Analysis By Material (Nitrile Rubber and Urethane Rubber) and Aircraft Type (Fixed Wing Aircraft, Rotary Wing Aircraft, and UAV)

Helicopters Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Type (Single Rotor, Multi Rotor, and Tilt Rotor), Weight (Light Weight, Medium Weight, and Heavy Weight), and Application (Commercial and Civil, and Military)

Aircraft MRO Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Components (Engine MRO, Avionics MRO, Airframe MRO, Cabin MRO, Landing Gear MRO, and Others), Aircraft Type (Fixed Wing Aircraft and Rotary Wing Aircraft), and End-Users (Commercial and Military)

Aircraft Wheels MRO Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Wheel Type (Nose Wheel and Main Wheel), Aircraft Type (Narrowbody Aircraft, Widebody Aircraft, General Aviation Aircraft, Military Aircraft, and Helicopter), and Technology (Inspection, Non-Destructive Testing, Machining, and Others)

Industrial Fasteners Market Forecast to 2028 - Covid-19 Impact and Global Analysis - by Types, Material, and Industry Verticals

Elastic Rail Fasteners Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Product Type (Buckle Plate Fastener, Concrete Pillow Fastener, Spring Fastener); Application (Heavy-haul, Urban Transport, High Speed, Conventional Rail) and Geography

Building and Construction Fasteners Market Forecast to 2028 - COVID-19 Impact and Global Analysis By Material (Metal, Plastic, Others); Application (Decking, Flooring, Roofing, Others); End Use (Residential, Commercial, Others) and Geography

About Us:The Insight Partners is a one stop industry research provider of actionable intelligence. We help our clients in getting solutions to their research requirements through our syndicated and consulting research services. We specialize in industries such as Semiconductor and Electronics, Aerospace and Defense, Automotive and Transportation, Biotechnology, Healthcare IT, Manufacturing and Construction, Medical Device, Technology, Media and Telecommunications, Chemicals and Materials.

Contact Us:If you have any queries about this report or if you would like further information, please contact us:

Contact Person:Sameer JoshiE-mail: sales@theinsightpartners.com Phone:+1-646-491-9876Press Release: https://www.theinsightpartners.com/pr/aerospace-titanium-fasteners-market

Continued here:

Aerospace Titanium Fasteners Market Size Worth $1.11Bn, Globally, by 2028 at 6.9% CAGR - Exclusive Report by The Insight Partners - GlobeNewswire

PITTSBURGH--(BUSINESS WIRE)--Howmet Aerospace Inc. (NYSE:HWM) will announce its first quarter 2022 financial results on Tuesday, May 3, 2022. The press release and presentation materials will be available at approximately 7:00 AM ET on May 3, 2022, via the Investors section of the Howmet Aerospace website. A link to the press release will also be available via the Howmet Aerospace Twitter handle @HowmetAerospace at https://twitter.com/HowmetAerospace.

The conference call and webcast will begin at 10:00 AM ET. Details of both follow.

Conference Call Information:

Day:

May 3, 2022

Time:

10:00 AM ET

Hosts:

John Plant, Executive Chairman and Chief Executive Officer

Ken Giacobbe, Executive Vice President and Chief Financial Officer

Call:

+1 (833) 240-0161

+1 (216) 562-0027 (International)

Conference ID: 4635778

To avoid a delay in start time, please dial in beginning at 9:45 AM ET

Webcast:

Available on the Investors/Events and Presentations section of http://www.howmet.com (audio and slides).

Replay Information

A replay of the call will be available on the Investors/Events and Presentations section of http://www.howmet.com from May 3, 2022 at 1:10 PM ET until May 17, 2022 at 11:59 PM ET. Details to follow.

Replay:

+1 (855) 859-2056

+1 (404) 537-3406 (International)

Conference ID: 4635778

Or access via the Investors/Events and Presentations section of http://www.howmet.com

About Howmet Aerospace

Howmet Aerospace Inc., headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Companys primary businesses focus on jet engine components, aerospace fastening systems, and airframe structural components necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. With nearly 1,150 granted and pending patents, the Companys differentiated technologies enable lighter, more fuel-efficient aircraft and commercial trucks to operate with a lower carbon footprint. For more information, visit http://www.howmet.com. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.

Dissemination of Company Information

Howmet Aerospace intends to make future announcements regarding Company developments and financial performance through its website at http://www.howmet.com.

See the article here:

Howmet Aerospace to Host Webcast and Announce First Quarter 2022 Results - businesswire.com

On CNBCs Halftime Report Final Trades, Jon Najarian chose Vertical Aerospace Ltd EVTL. The shares are getting a big pop today [Tuesday] and people are betting that theyre gonna keep going higher, he said.

Stephanie Link of Hightower said that she had been adding to Target Corporation TGT. Its now my largest discretionary name, Link mentioned. Target is a best-in-class retailer, generating double-digit comps and buying back $10 billion worth of stock, she added.

Check out other retail stocks making big moves in the premarket.

Also Read:5 Best Consumer Staples Stocks To Buy: Walmart, Coca-Cola And More

Degas Wright of Decatur Capital Management named Accenture Plc ACN as his final trade, saying the company is a leading digital and cloud consulting firm with a free cash flow yield of 7% and growing earnings estimates.

Joshua Brown of Ritholtz Wealth Management chose Dutch Bros Inc BROS. Caffeine is recession proof, Brown said. He added that the stock chart for this company shows higher lows, which indicates that buyers are stepping in earlier each time.

Excerpt from:

CNBC's Final Trades: Vertical Aerospace, Target, Dutch Bros And This Top IT Consulting Company - Benzinga - Benzinga

CAMPBELL, Calif., April 12, 2022--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, announced its Laser Focused Podcast will launch today, with episodes released bi-weekly. The podcast features interviews with Renette Youssef, Velo3D CMO, and innovators in various industries and roles related to 3D printing and mechanical engineering, including aviation, space, automotive, and manufacturing.

"By profiling thought leaders in various engineering-related rolesand peripheral, supporting industriesLaser Focused aims to inspire new innovators to make their impact on the world," said Renette Youssef, Laser Focused Host. "The podcast looks at how innovators get their big ideas, the obstacles they face, and how they overcome these challenges. Its a transparent look at how trailblazers of all types can train themselves to think differently and make an impact."

The first season of Laser Focused features 12 episodes. Some of the guests on Season 1 include Max Haot, Founder and CEO of Launcher; Tess Hatch, Partner at Bessemer Venture Partners; and Stefan Krause, an entrepreneur in the automotive industry and a former executive at BMW and Canoo.

Laser Focused can be found on all the major streaming apps, including Apple Podcasts, Spotify, and Stitcher. Learn more about Laser Focused or suggest a guest by visiting Velo3D.com.

About Velo3D:

Velo3D is a metal 3D printing technology company. 3D printingalso known as additive manufacturing (AM)has a unique ability to improve the way high-value metal parts are built. However, legacy metal AM has been greatly limited in its capabilities since its invention almost 30 years ago. This has prevented the technology from being used to create the most valuable and impactful parts, restricting its use to specific niches where the limitations were acceptable.

Velo3D has overcome these limitations so engineers can design and print the parts they want. The companys solution unlocks a wide breadth of design freedom and enables customers in space exploration, aviation, power generation, energy and semiconductor to innovate the future in their respective industries. Using Velo3D, these customers can now build mission-critical metal parts that were previously impossible to manufacture. The end-to-end solution includes the Flow print preparation software, the Sapphire family of printers, and the Assure quality control systemall of which are powered by Velo3Ds Intelligent Fusion manufacturing process. The company delivered its first Sapphire system in 2018 and has been a strategic partner to innovators such as SpaceX, Honeywell, Honda, Chromalloy, and Lam Research. Velo3D has been named to Fast Companys prestigious annual list of the Worlds Most Innovative Companies for 2021. For more information, please visit velo3d.com, or follow the company on LinkedIn or Twitter.

Story continues

Forward-Looking Statements

This press release includes "forward-looking statements" within the meaning of the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1996. The Companys actual results may differ from its expectations, estimates and projections and consequently, you should not rely on these forward-looking statements as predictions of future events. Words such as "expect," "estimate," "project," "budget," "forecast," "anticipate," "intend," "plan," "may," "will," "could," "should," "believes," "predicts," "potential," "continue," and similar expressions are intended to identify such forward-looking statements. These forward-looking statements include, without limitation, the Companys expectations, hopes, beliefs, intentions or strategies for the future. These forward-looking statements involve significant risks and uncertainties that could cause the actual results to differ materially from the expected results. You should carefully consider the risks and uncertainties described in the documents filed by the Company from time to time with the SEC. These filings identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements. Most of these factors are outside the Companys control and are difficult to predict. The Company cautions not to place undue reliance upon any forward-looking statements, including projections, which speak only as of the date made. The Company does not undertake or accept any obligation to release publicly any updates or revisions to any forward-looking statements to reflect any change in its expectations or any change in events, conditions or circumstances on which any such statement is based.

VELO, VELO3D, SAPPHIRE, and INTELLIGENT FUSION, are registered trademarks of Velo3D, Inc.; and WITHOUT COMPROMISE, FLOW and ASSURE are trademarks of Velo3D, Inc. All Rights Reserved Velo3D, Inc.

View source version on businesswire.com: https://www.businesswire.com/news/home/20220412006020/en/

Contacts

Media Contact:

Velo3DDan Sorensendan.sorensen@velo3d.com

Investor Relations:

Bob Okunski, VP Investor Relationsinvestors@velo3d.com

Read the rest here:

Laser Focused Podcast Launches April 12, Highlights Innovators in Aerospace, Additive Manufacturing, and Other Engineering-related Fields - Yahoo...

"This is an exciting step forward for our company to serve in this rapidly evolving industry," said Colatosti. "Together we will unite our strengths, strong cultures and world-class employees to gain expanded capabilities and resources to deliver full lifecycle solutions that address our customers' greatest challenges. The ERC-Oasis combination will pull together many capabilities while remaining steadfast to one mindset the customer's mission."

"Our experienced and talented employees across the country are committed to providing the advantages needed to solve our customers' and the nation's toughest challenges," said Stacy Riley, interim CEO of ERC. "We believe our organizations will be stronger together, offering even greater support to our many customers' missions."

"Our government continues to need comprehensive and innovative solutions to help support its missions, protect and defend our country, and move the nation forward now and for generations to come," said Michael Singer, Partner at Brightstar. "We are excited to start a new chapter and see tremendous opportunities for growth by delivering a more robust set of services to better meet customers' needs and expectations."

ERC and Oasis share many important characteristics including an entrepreneurial engineering approach, core values, and a commitment to our nation and its future. Their common cultures are built on respect, empowerment and collaboration. Both ERC and Oasis also have a strong performance record of success and a long history of delivering cutting-edge engineering, technology, and specialized services to support our customers' missions.

Combined, ERC and Oasis will offer differentiated capabilities that deliver advanced, full lifecycle solutions in the areas of:

ERC was advised by legal counsel Kirkland & Ellis and financial advisor Houlihan Lokey. Rothschild & Co served as the exclusive financial advisor to Oasis, and Sullivan & Cromwell served as legal counsel.

About ERC-Oasis ERC-Oasis will be a leading innovator providing advanced engineering, cybersecurity and technology-focused consulting solutions for one mission customer success from aerospace to cyberspace. ERC-Oasis will provide entrepreneurial-driven, expert teams to advance innovative solutions for customers such as the U.S. Department of Defense, Federal Aviation Administration, NASA and other high-tech governmental entities on missions of national importance.ERC-Oasis solutions will combine precise engineering, innovative technologies, deep subject-matter expertise, firsthand mission understanding, and long-term customer knowledge to deliver the critical advantage needed to solve critical challenges. ERC-Oasis employees will share a collaborative culture built on commitment, integrity, teamwork, respect, and uncompromising performance, which will enable best-in-class service and solutions for its customers. For more information, go to http://www.erc.us and http://www.oasissystems.com.

About Brightstar Capital Partners Brightstar Capital Partnersis a middle market private equity firm focused on investing closely held family, founder or entrepreneur-owned businesses where Brightstar believes it can drive significant value with respect to the management, operations and strategic direction of the business. Brightstar employs an operationally intensive "Us & Us" approach that leverages its extensive experience and relationship network to help companies reach their full potential. For more information, please visitwww.brightstarcp.com.

Media Contact:

Kristina Messner (Focused Image for ERC-Oasis) [emailprotected] 703-678-6023

For Oasis Laura Evans Senior Vice President of Human Resources [emailprotected] 301.278.2520

SOURCE BRIGHTSTAR CAPITAL PARTNERS L.P.

Link:

Brightstar Capital Partners to Combine ERC and Oasis Systems to Advance Customer Mission Success in Aerospace, Defense and Cyberspace - PR Newswire

FORT AKINSON, Wisc., - Since the golden age of air travel started with BOAC's 44-seat Comet 1A in 1952, the jet aircraft has been a ubiquitous fixture in our skies that has thrilled enthusiasts and created the convenience and safety that transcends other forms of transport, AviationPros reports.Continue reading original article.

The Military & Aerospace Electronics take:

12 April 2022 -Jim Scott of the United Kingdom-based Artemis Aerospace says that "While few fundamental features have changed since the 1950s, jet engines have continued to improve in power and efficiency with modifications made to fuselage, flight decks and engines among other essential adjustments.

He continues, "Indeed, two of the most popular and long-serving airplanes in operation: Boeing's 737 and Airbus's A320 have moved through many variants since they launched in the 1960s and 1980s respectively. However, the basic concept has remained the same: to provide safe and economical air travel."

Scott's piece notes on the technological steps achievable in the future of commercial aerospace.

Related: UMAV announces its lighter-than-air uncrewed aircraft is ready for avionics

Related: Etihad Airways' sustainable flight reduces carbon emissions by 72%

Related: Civilian and military aircraft get avionics upgrades

Jamie Whitney, Associate EditorIntelligent Aerospace

Read more:

From power to pilotless: Imagining the future of aircraft design - Military & Aerospace Electronics

This 3D Machine Vision in the Aerospace Industry market report provides a unique consolidation of the current market situation and drivers affecting the 3D Machine Vision in the Aerospace Industry environment with representing the 3D Machine Vision in the Aerospace Industry market by studying the leading segment, sectors, countries, regions, and products and services across the spectrum of economic development. The report further explains the major issue affecting the 3D Machine Vision in the Aerospace Industry market in the listed countries and regions. The productivity levels of the market in these countries and regions is discussed in the study along with the individual market shares, CAGR, yearly revenue, GDP, capital, margin and profitability.

Companies operating in the 3D Machine Vision in the Aerospace Industry MarketFARO TechnologiesMetrisNeptecNVision

The report provides forecasts up to 2028 in this report which are according to the demand of the product & services, markets, regions in US dollars at the manufacturer level. In addition, the report illustrates the historical trends, world overview, product demand, regional demand, including the market segments. The evaluation is done through conducting in-depth quantitative, qualitative insights, past data, and verifiable projections about market size.

Available Sample Report @ https://www.orbisresearch.com/contacts/request-sample/5602250?utm_source=RohitGIR2

The report identifies issues in the 3D Machine Vision in the Aerospace Industry market concerning the market and studies the key geographic regions like Middle East & Africa, Europe, Asia Pacific, North America have been studied in terms of market penetration, revenue information. The regions are studied in detail to give a better understanding of the opportunities and at the same time risks, challenges, demand, target markets, and more such details in these regions for the market players. The report described the competitive environment in these regions and explains the profiles of the leading players

By the product type, the market is primarily split into: MLComputer VisionNLP

By the end-users/application, this report covers the following segments: CybersecurityRobotPlanningOther

Key Pointers of the report: The report studies the most promising markets across the world including US, UK, Spain, Japan, Italy, India, Germany, France, China, Canada, and Australia among others. It covers the study of the key sector in these regions that have annual revenue over US$500 million. The key performance indicators have been identified in these regions including competitiveness, economic environment, potential, and sustainability. The report provides an extensive coverage of the key players in the 3D Machine Vision in the Aerospace Industry markets supply chain spanning across primary, secondary, and tertiary sectors.

Read complete report @ https://www.orbisresearch.com/reports/index/global-3d-machine-vision-in-the-aerospace-industry-market-2021-by-company-regions-type-and-application-forecast-to-2026?utm_source=RohitGIR2

Table of Contents 1.1 Study Scope1.2 Key Market Segments1.3 Players Covered: Ranking by 3D Machine Vision in the Aerospace Industry Revenue1.4 Market Analysis by Type1.4.1 3D Machine Vision in the Aerospace Industry Market Size Growth Rate by Type: 2020 VS 20281.5 Market by Application1.5.1 3D Machine Vision in the Aerospace Industry Market Share by Application: 2020 VS 20281.6 Study Objectives1.7 Years Considered1.8 Continue

Inquiry for Buying Report @ https://www.orbisresearch.com/contacts/enquiry-before-buying/5602250?utm_source=RohitGIR2

Why Buy This Report? The 3D Machine Vision in the Aerospace Industry market projections and annual growth rate between the year 2021 and 2025 in terms of market value is given in the report. The strategies incorporated by the companies to address the risks and finding new opportunities to emerge from the covid-19 situation are presented here. The strategies for preparing the players for the new normal are given in the report.

About Us:Orbis Research (orbisresearch.com) is a single point aid for all your market research requirements. We have vast database of reports from the leading publishers and authors across the globe. We specialize in delivering customized reports as per the requirements of our clients. We have complete information about our publishers and hence are sure about the accuracy of the industries and verticals of their specialization. This helps our clients to map their needs and we produce the perfect required market research study for our clients.

Contact Us:Hector CostelloSenior Manager Client Engagements4144N Central Expressway,Suite 600, Dallas,Texas 75204, U.S.A.Phone No.: USA: +1 (972)-362-8199 | IND: +91 895 659 5155

More here:

3D Machine Vision in the Aerospace Industry Market 2022: key developmental strategies implemented by the key players: FARO Technologies, Metris,...

The Intelligent Automation in Aerospace and Defence Market report offers the size of the market, market share, and market segmentation, an in-depth research study of the demand. The report further identifies the most recent disruption in the area of Intelligent Automation in Aerospace and Defence and includes a detailed market intelligence survey. Similarly, the Intelligent Automation in Aerospace and Defence article discusses the cost structure and production process in detail. The Intelligent Automation in Aerospace and Defence analysis also provides a quick description of the market dynamics as well as predictions for the Intelligent Automation in Aerospace and Defence based on consumption, product, and geographic regions. Product features, business portfolio, product price, sales, and contact details are all included in the keyword analysis.

Crucial references pertaining to the competition spectrum, identifying lead players have been well incorporated in this research report.The major players covered in Intelligent Automation in Aerospace & Defence are:Microsoft CorporationBoeingIBMIntel CorporationAirbusNVIDIAThalesXilinxSamsungGeneral ElectricLockheed MartinIris Automation IncGarminSITA

A detailed overview of upstream raw materials, downstream demand and equipment analysis can also be found in the Intelligent Automation in Aerospace and Defence study. In addition, the Intelligent Automation in Aerospace and Defence report addresses the current business situation among key players, the value chains characteristics, and a general overview of market prices. In addition, the study report provides valuable market segmentation knowledge that is crafted using primary and secondary research techniques. The Intelligent Automation in Aerospace and Defence research delved into marketing platforms and industry dynamics, as well as current and potential demand scenarios.

The key regions covered in the Intelligent Automation in Aerospace and Defence market report are:North America (U.S., Canada, Mexico)South America (Cuba, Brazil, Argentina, and many others.)Europe (Germany, U.K., France, Italy, Russia, Spain, etc.)Asia (China, India, Russia, and many other Asian nations.)Pacific region (Indonesia, Japan, and many other Pacific nations.)Middle East & Africa (Saudi Arabia, South Africa, and many others.)

We Have Recent Updates of Intelligent Automation in Aerospace and Defence Market in Sample [emailprotected] https://www.orbisresearch.com/contacts/request-sample/5483215?utm_source=PoojaGIR4

Segmentation by Type:

HardwareSoftwareServices

Segmentation by Application:

MilitaryCommercial AviationSpace

Similarly, the Intelligent Automation in Aerospace and Defence sectors market landscape includes a comprehensive structural overview of the vendors results and company, comprising financial estimates, regional and segmental revenue break-ups. The report also offers an extensive review of the most significant growths in the Intelligent Automation in Aerospace and Defence market. Comprehensive data on all dimensions have been shared, as well as an all-encompassing analysis of all segments, regional, categories, and country studies. The study goes on to explore growth dynamics, lucrative opportunities, major challenges, and prospects.

What Does the Report Include? The companies that have launched innovative products to meet an ever-growing array of human demands are listed in the report. The companies that have expanded rapidly in multiple countries across the world, implemented aggressive strategies to make high growth and profits are included in the report as it aims to boost growth of all the players small, medium, and large across in the industry. The strategic choices for the market players important for success in the Intelligent Automation in Aerospace and Defence industry are given in the report.

Report Pointers: Analysis of different markets such as U.S, China, Japan, Germany, Canada, Russia, U.K, Netherlands, etc that are projected to be the biggest investment markets and projected to grow stronger in the Intelligent Automation in Aerospace and Defence market is given in the report. The report provides in-depth review of the Intelligent Automation in Aerospace and Defence market with the help of standard market analysis technique, SWOT analysis of industry. The report studies the national and multinational corporations and regulatory changes in the Intelligent Automation in Aerospace and Defence market environment. The report anticipates trends, quantifies risks, elucidates standardized & comparable data, and market forecasts thereby allowing the market players to prioritize market opportunities.

Manufacturers who are building a global lead in critical industries and generating high-value products and services in their home market are highlighted in the study. Manufacturers emphasise cost-cutting methods like Covid-19 in order to boost profitability during periods of decreasing sales volume. International firms market share, market size, and GDP contribution in the worldwide Intelligent Automation in Aerospace and Defence market. The author investigates how domestic manufacturers participate in the global Intelligent Automation in Aerospace and Defence market and how market cyclicality affects domestic Intelligent Automation in Aerospace and Defence sales and output.

In addition to competitive perspectives related to product pricing and marketing, Intelligent Automation in Aerospace and Defence marketplace analysis also offers key competitors. The Intelligent Automation in Aerospace and Defence market analysis report is a detailed survey highlighting industry patterns, as well as a systematic overview of market size, share, and dynamics. The report includes an in-depth analysis of industry competition as well as a review of Porters Five Forces model to assist customers in determining the pricing landscape of major producers of Intelligent Automation in Aerospace and Defence markets. In order to offer users of this study with an accurate view of the Intelligent Automation in Aerospace and Defence industry, we have delivered an extensive competitive landscape and a product supply of the major suppliers distributed over various geographical areas. For the anticipated timeframe, the study includes the most recent market forecast review. The competitive section of the market research report lists a variety of significant suppliers in the Intelligent Automation in Aerospace and Defence industry.

Place Inquiry for Buying or Customization of [emailprotected] https://www.orbisresearch.com/contacts/enquiry-before-buying/5483215?utm_source=PoojaGIR4

About Us:Orbis Research (orbisresearch.com) is a single point aid for all your market research requirements. We have vast database of reports from the leading publishers and authors across the globe. We specialize in delivering customized reports as per the requirements of our clients. We have complete information about our publishers and hence are sure about the accuracy of the industries and verticals of their specialization. This helps our clients to map their needs and we produce the perfect required market research study for our clients.

Contact Us:Hector CostelloSenior Manager Client Engagements4144N Central Expressway,Suite 600, Dallas,Texas 75204, U.S.A.Phone No.: USA: +1 (972)-362-8199 | IND: +91 895 659 5155

See the rest here:

Intelligent Automation in Aerospace and Defence Market Expected to Reach Highest CAGR 2028: The major players covered in Intelligent Automation in...

Job Description

The Mechanical and Aerospace Engineering Department at the United Arab Emirates University invites applicants for a faculty position in the areas of Materials Engineering/ Aircraft structure / Design Engineering / Industrial & Manufacturing Engineering. Qualified candidates at all levels will be considered at a rank commensurate with academic accomplishments. Candidates are expected to have a strong commitment to teaching excellence and student advising at the undergraduate and graduate levels, a demonstrable research capability that will enable the candidate to develop and sustain an internally and/or externally funded research program in his/her area of expertise, publish his/her research findings in refereed journals, and actively engage in promoting the growth of the UAE University. The application package should include a cover letter, a detailed CV, a brief description of current/future research activities, teaching philosophy, and courses taught. English is the language of instruction and communication. Screening of applications will continue until the position is filled.

Minimum Qualification

Preferred Qualification

Ph. D in related fields from an internationally recognized University and proven record of publication in top-ranked journals and relevant teaching experience at the undergraduate and graduate levels. Experience in aerospace materials is preferred.

Division College of Engineering - (COE)Department Mechanical & Aerospace Eng.-(COE)Job Close Date open until filledJob Category Academic - Faculty

Follow this link:

Assistant Professor in Mechanical and Aerospace Engineering, Mechanics, Structure and Manufacturing job with UNITED ARAB EMIRATES UNIVERSITY | 289276...

Defence Minister Rajnath Singh has met senior executives of American aerospace and defence majors Boeing and Raytheon and asked them to take advantage of policy initiatives in India to steadily march from Make in India towards Make for the World.

Singh along with External Affairs Minister S Jaishankar arrived in the US capital on Sunday to attend the India-US 2+2 ministerial dialogue in Washington on Monday the first under the Biden administration.

Raksha Mantri Shri @rajnathsingh met with the US aerospace & defence majors Boeing and Raytheon after reaching Washington DC. He exhorted the companies to take advantage of policy initiatives in India to steadily march from Make in India towards Make for the World, the Defence Ministry tweeted on Monday.

US Secretary of State Antony Blinken and Defence Secretary Lloyd Austin will host Jaishankar and Singh for the 2+2 ministerial on Monday.

To be held under the shadow of the Ukrainian crisis, the 2+2 ministerial is reflective of the significance the two governments attach to this bilateral strategic relationship.

In fact, President Biden has signalled to elevate the 2+2 ministerial by himself having a virtual meeting with Prime Minister Narendra Modi from the White House on Monday.

The two Indian ministers along with their American counterparts are slated to participate in the virtual meeting from the White House.

The 2+2 ministerial along with the respective delegations would take place at the State Department on Monday afternoon.

The 2+2 Dialogue would enable both sides to undertake a comprehensive review of cross-cutting issues in the India-US bilateral agenda related to foreign policy, defence and security with the objective of providing strategic guidance and vision for further consolidating the relationship, the Ministry of External Affairs said in a press release on Thursday.

The 2+2 Dialogue will also provide an opportunity to exchange views about important regional and global developments and how we can work together to address issues of common interest and concern, it said.

The 2+2 Ministerial is an important opportunity to advance our shared objectives across the breadth of the US-India Strategic Partnership, the State Department said last week.

It is also a chance to highlight the growing Major Defence Partnership between the United States and India, it said on the importance of the meeting.

Excerpt from:

Rajnath Singh meets executives of US aerospace giants Boeing and Raytheon - The Indian Express

The research released by Market Research Place named Global Aerospace & Defense Connectors Market from 2022 to 2028 provides a comprehensive analysis of the industry, including product description, market segmentation based on different factors, and the current player situation. And for the projected timeframe of 2022-2028, the research evaluates the potential and current market conditions, providing insights and updates about the related segments operating in the global Aerospace & Defense Connectors market.

The research gives business customers an in-depth analysis of the global Aerospace & Defense Connectors market, including a study of market dynamics, market size, market price, and market growth over the projected period on an annual basis. This document contains a detailed prospective study of the company. It displays vital data and manufacturing status and might be a valuable source of guidance for organizations and companies. Moreover, it provides a comprehensive overview of the major players.

DOWNLOAD FREE SAMPLE REPORT: https://www.marketresearchplace.com/report-detail/215147/request-sample

The following are the key players profiled in the market report:

The product may be segmented into the following market segments based on its type:

Market segmentation by use, segmented into

The following are the regions covered in the study:

ACCESS FULL REPORT: https://www.marketresearchplace.com/report/global-aerospace-defense-connectors-market-research-report-215147.html

The market study then forecasts global Aerospace & Defense Connectors market development trends for 2022-2028. This also contains details of strategic partnerships. SWOT analysis, investment analysis phase, and net income analysis are also included in this study.

The market trends are forecasted in this study. Additionally, the market analysis provides an insight into the global Aerospace & Defense Connectors market based on several variables, including geographic scope, market segmentation, growth drivers, and market restraints.

Customization of the Report:

This report can be customized to meet the clients requirements. Please connect with our sales team (sales@marketresearchplace.com), who will ensure that you get a report that suits your needs. You can also get in touch with our executives on 1-201-465-4211 to share your research requirements.

Contact UsMark StoneHead of Business DevelopmentPhone: 1-201-465-4211Email: sales@marketresearchplace.comWeb: http://www.marketresearchplace.com

Here is the original post:

Global Aerospace And Defense Connectors Market 2022 Outlook and Study of Top Players as Amphenol Corporation, Bel Fuse Inc., Carlisle Interconnect...