ERC president ‘optimistic’ UK will stay in ‘irreplaceable’ fund – Times Higher Education (THE)

The UK gains benefits from the European Research Council that cannot be replaced, but there is good reason to be optimistic about the nation staying part of the programme despite Brexit, according to the funders new president.

The UK has been the number one [nation] in terms of funding received since the ERC was established in 2007, Mauro Ferrari toldTimes Higher Educationafter taking office last month. But the real benefit is bigger than that, he added.

Perhaps the biggest advantage of them all is that ERC grants strengthen the UKs position as a top destination for non-UK scientists, Professor Ferrari said. Think of all the great people that are in the UK with an ERC grant.

Science is all about people. You need the best people: you need to recruit them, you need to retain them. And I think the ERC has been a great instrument for the UK to do that.

Prestigious ERC grants for outstanding researchers, part of the European Unions wider framework programmes for research, have been described asmini-Nobel prizesand as the Champions League of research.

There is no certainty over whether the UK will seek to, or be allowed to, join the next framework programme, Horizon Europe, as an associated country when it starts in January 2021.

ERC grants are portable, but holders are expected to spend at least 50 per cent of their working time in an EU member state or associated country leading some in the UK to fear that the nation will miss out on attracting world-leading researchers if it does not associate to Horizon Europe.

While the UK will continue to attract and retain science talent, no matter what, because of its history and continuous investment, there is this bit that comes from the international connotation of the ERC that, I think, cannot be replaced, Professor Ferrari said.

His comments came as John Womersley, chief executive of the Science and Technology Facilities Council between 2011 and 2016, warns that there is great risk that the UK may choose not to associate to Horizon Europe.

Writing in THE, Professor Womersley now director-general of the European Spallation Source says that while UK-based researchers are keen to retain access to ERC funding, ministers are less likely to be keen on the two other larger pillars of Horizon Europe, covering challenge-based funding and the new European Innovation Council.

Professor Womersley warns that the EU is unlikely to allow cherry-picking of Horizon Europe, leading him to conclude that the UK was more likely to use the money it would otherwise contribute to the scheme tocreate a UK-based replacement for the ERC.

Asked by THE whether the UK could associate to the ERC, Professor Ferrari said that he cannot speculate on that. Thats the domain of a political negotiation, he said.

But given unanimous sentiment among UK and continental European scientists he had spoken with, he added: I would say there is good reason to be optimistic that some sort of reasonable construct will be reached that allows scientists to do their job in the best possible way.

ProfessorFerrari also discussed the ERCs role in building bridges between blue-sky research and innovation a link where he has personal experience as a pioneer of nanomedicine.

His 40-year academic career in the US began in engineering with a post at the University of California, Berkeley, then changed course following the death of his wife from cancer, after which heentered medical school at the age of 43to fight the disease.

Professor Ferrari retired as chief commercialisation officer at Houston Methodist Research Institute in 2019, but remains an affiliate professor with a lab at the University of Washington in Seattle.

I have returned [to Europe] for this job because I thought it was such an extraordinary and unique opportunity, he said.

The ERC, which evaluates proposals through international panels of leading scientists, is based on the principle that no individual, no agency, no office can actually envisage the future, what are the necessaryworld-changing breakthroughs in all of the fields of science, Professor Ferrari said. So we let scientists tell us.

Although European science is one of the global front-runners, he continued, there is no doubt about the fact that Europe has been lagging behind the United States when it comes to translation of great discoveries into innovation.

Professor Ferrari added that although the ERC by mandate is only doing blue-sky research, it has a role in addressing that by ensuring that research is best friends with innovation. We connect: we make sure our scientists are aware of whats happening in innovation, and make sure people on the innovation side are aware of what leading scientists are doing, he said.

john.morgan@timeshighereducation.com

Here is the original post:
ERC president 'optimistic' UK will stay in 'irreplaceable' fund - Times Higher Education (THE)

Shantanu Sur Receives Tenure and Promotion to Associate Professor at Clarkson University – Clarkson University News

Prof. Shantanu Sur

Clarkson University President Tony Collins has announced that Shantanu Sur has been granted tenure and promoted from assistant professor to associate professor of biology in the School of Arts and Sciences.

A neuroscientist by training and working on the design of neural scaffolds and regeneration, Shantanu has expanded his research at Clarkson from studying airborne pathogens to build mathematical models for disease prediction. His recent work focuses on understanding the interactions between cancer cells and supramolecular biomaterials to identify supramolecular design principles that can induce regulated cell death. He is also collaborating with faculty from the Mathematics Department to develop a model of cancer cell movement to better understand the invasive behavior of cancer cells.

Shantanu has developed an extensive collaboration with the Canton-Potsdam Hospital to explore the possibilities of real-world applications of his research. He is working closely with Dr. Suresh Dhaniyala, Professor of Mechanical and Aeronautical Engineering, towards the detection and monitoring of pathogens causing healthcare-associated infections (HAIs) by using a network of portable, field-deployable sensors. In a different direction, he is working with Dr. Sumona Mondal, Professor of Mathematics and Dr. Eyal Kedar, Rheumatologist at the Canton-Potsdam Hospital to develop predictive models to aid in the diagnosis and prognosis of rheumatoid arthritis in a rural setting.

He has authored or co-authored more than twenty peer-reviewed publications and two book chapters, which include publications in prestigious journals such as Nature Communications, Nano Letters, ACS Nano, Angewandte Chemie, and Biomaterials. His research has been supported through external funding agencies such as NSF, NYSDEC, and HTR NEXUS-NY.

At Clarkson, he teaches courses in the area of clinical and health sciences. In addition to serving the Biology Department, he has been teaching core courses in the Department of Physical Therapy and the Department of Occupational Therapy. Two graduate students mentored by him received the prestigious NSF Graduate Research Fellowship.

Shantanu is a trained physician, completed his Bachelors in Medicine and Surgery from N.R.S. Medical College, University of Calcutta. He received his Masters in Medical Science and Technology and Ph.D. from the School of Medical Science and Technology, Indian Institute of Technology Kharagpur. Before joining Clarkson, he worked as a research scientist at the Brain Science Institute, RIKEN and a postdoctoral fellow at the Institute for BioNanotechnology in Medicine, Northwestern University.

Read the rest here:
Shantanu Sur Receives Tenure and Promotion to Associate Professor at Clarkson University - Clarkson University News

Machine learning finds a novel antibiotic able to kill superbugs – STAT – STAT

For decades, discovering novel antibiotics meant digging through the same patch of dirt. Biologists spent countless hours screening soil-dwelling microbes for properties known to kill harmful bacteria. But as superbugs resistant to existing antibiotics have spread widely, breakthroughs were becoming as rare as new places to dig.

Now, artificial intelligence is giving scientists a reason to dramatically expand their search into databases of molecules that look nothing like existing antibiotics.

A study published Thursday in the journal Cell describes how researchers at the Massachusetts Institute of Technology used machine learning to identify a molecule that appears capable of countering some of the worlds most formidable pathogens.

advertisement

When tested in mice, the molecule, dubbed halicin, effectively treated the gastrointestinal bug Clostridium difficile (C. diff), a common killer of hospitalized patients, and another type of drug-resistant bacteria that often causes infections in the blood, urinary tract, and lungs.

The most surprising feature of the molecule? It is structurally distinct from existing antibiotics, the researchers said. It was found in a drug-repurposing database where it was initially identified as a possible treatment for diabetes, a feat that showcases the power of machine learning to support discovery efforts.

Now were finding leads among chemical structures that in the past we wouldnt have even hallucinated that those could be an antibiotic, said Nigam Shah, professor of biomedical informatics at Stanford University. It greatly expands the search space into dimensions we never knew existed.

Shah, who was not involved in the research, said that the generation of a promising molecule is just the first step in a long and uncertain process of testing its safety and effectiveness in humans.

But the research demonstrates how machine learning, when paired with expert biologists, can speed up time-consuming preclinical work, and give researchers greater confidence that the molecule theyre examining is worth pursuing through more costly phases of drug discovery.

That is an especially pressing challenge in the development of new antibiotics, because a lack of economic incentives has caused pharmaceutical companies to pull back from the search for badly needed treatments. Each year in the U.S., drug-resistant bacteria and fungi cause more than 2.8 million infections and 35,000 deaths, with more than a third of fatalities attributable to C. diff, according to the the Centers for Disease Control and Prevention.

The damage is far greater in countries with fewer health care resources.

Without the development of novel antibiotics, the World Health Organization estimates that the global death toll from drug resistant infections is expected to rise to 10 million a year by 2050, up from about 700,000 a year currently.

In addition to finding halicin, the researchers at MIT reported that their machine learning model identified eight other antibacterial compounds whose structures differ significantly from known antibiotics.

I do think this platform will very directly reduce the cost involved in the discovery phase of antibiotic development, said James Collins, a co-author of the study who is a professor of bioengineering at MIT. With these models, one can now get after novel chemistries in a shorter period of time involving less investment.

The machine learning platform was developed by Regina Barzilay, a professor of computer science and artificial intelligence who works with Collins as co-lead of the Jameel Clinic for Machine Learning in Health at MIT. It relies on a deep neural network, a type of AI architecture that uses multiple processing layers to analyze different aspects of data to deliver an output.

Prior types of machine learning systems required close supervision from humans to analyze molecular properties in drug discovery and produced spotty results. But Barzilays model is part of a new generation of machine learning systems that can automatically learn chemical properties connected to a specific function, such as an ability to kill bacteria.

Barzilay worked with Collins and other biologists at MIT to train the system on more than 2,500 chemical structures, including those that looked nothing like antibiotics. The effect was to counteract bias that typically trips up most human scientists who are trained to look for molecular structures that look a lot like other antibiotics.

The neural net was able to isolate molecules that were predicted to have antibacterial qualities but didnt look like existing antibiotics, resulting in the identification of halicin.

To use a crude analogy, its like you show an AI all the different means of transportation, but youve not shown it an electric scooter, said Shah, the bioinformatics professor at Stanford. And then it independently looks at an electronic scooter and says, Yeah, this could be useful for transportation.

In follow-up testing in the lab, Collins said, halicin displayed a remarkable ability to fight a wide range of multidrug-resistant pathogens. Tested against 36 such pathogens, it displayed potency against 35 of them. Collins said testing in mice showed excellent activity against C. diff, tuberculosis, and other bacteria.

The ability to identify molecules with specific antibiotic properties could aid in the development of drugs to treat so-called orphan conditions that affect a small percentage of the population but are not targeted by drug companies because of the lack of financial rewards.

Collins noted that commercializing halicin would take many months of study to evaluate its toxicity in humans, followed by multiple phases of clinical trials to establish safety and efficacy.

Read the original post:
Machine learning finds a novel antibiotic able to kill superbugs - STAT - STAT

Machine Learning: Real-life applications and it’s significance in Data Science – Techstory

Do you know how Google Maps predicts traffic? Are you amused by how Amazon Prime or Netflix subscribes to you just the movie you would watch? We all know it must be some approach of Artificial Intelligence. Machine Learning involves algorithms and statistical models to perform tasks. This same approach is used to find faces in Facebook and detect cancer too. A Machine Learning course can educate in the development and application of such models.

Artificial Intelligence mimics human intelligence. Machine Learning is one of the significant branches of it. There is an ongoing and increasing need for its development.

Tasks as simple as Spam detection in Gmail illustrates its significance in our day-to-day lives. That is why the roles of Data scientists are in demand to yield more productivity at present. An aspiring data scientist can learn to develop algorithms and apply such by availing Machine Learning certification.

Machine learning as a subset of Artificial Intelligence, is applied for varied purposes. There is a misconception that applying Machine Learning algorithms would need a prior mathematical knowledge. But, a Machine Learning Online course would suggest otherwise. On contrary to the popular approach of studying, here top-to-bottom approach is involved. An aspiring data scientist, a business person or anyone can learn how to apply statistical models for various purposes. Here, is a list of some well-known applications of Machine Learning.

Microsofts research lab uses Machine Learning to study cancer. This helps in Individualized oncological treatment and detailed progress reports generation. The data engineers apply pattern recognition, Natural Language Processing and Computer vision algorithms to work through large data. This aids oncologists to conduct precise and breakthrough tests.

Likewise, machine learning is applied in biomedical engineering. This has led to automation of diagnostic tools. Such tools are used in detecting neurological and psychiatric disorders of many sorts.

We all have had a conversation with Siri or Alexa. They use speech recognition to input our requests. Machine Learning is applied here to auto generate responses based on previous data. Hello Barbie is the Siri version for the kids to play with. It uses advanced analytics, machine learning and Natural language processing to respond. This is the first AI enabled toy which could lead to more such inventions.

Google uses Machine Learning statistical models to acquire inputs. The statistical models collect details such as distance from the start point to the endpoint, duration and bus schedules. Such historical data is rescheduled and reused. Machine Learning algorithms are developed with the objective of data prediction. They recognise the pattern between such inputs and predict approximate time delays.

Another well-known application of Google, Google translate involves Machine Learning. Deep learning aids in learning language rules through recorded conversations. Neural networks such as Long-short term memory networks aids in long-term information updates and learning. Recurrent Neural networks identify the sequences of learning. Even bi-lingual processing is made feasible nowadays.

Facebook uses image recognition and computer vision to detect images. Such images are fed as inputs. The statistical models developed using Machine Learning maps any information associated with these images. Facebook generates automated captions for images. These captions are meant to provide directions for visually impaired people. This innovation of Facebook has nudged Data engineers to come up with other such valuable real-time applications.

The aim here is to increase the possibility of the customer, watching a movie recommendation. It is achieved by studying the previous thumbnails. An algorithm is developed to study these thumbnails and derive recommendation results. Every image of available movies has separate thumbnails. A recommendation is generated by pattern recognition among the numerical data. The thumbnails are assigned individual numerical values.

Tesla uses computer vision, data prediction, and path planning for this purpose. The machine learning practices applied makes the innovation stand-out. The deep neural networks work with trained data and generate instructions. Many technological advancements such as changing lanes are instructed based on imitation learning.

Gmail, Yahoo mail and Outlook engage machine learning techniques such as neural networks. These networks detect patterns in historical data. They train on received data about spamming messages and phishing messages. It is noted that these spam filters provide 99.9 percent accuracy.

As people grow more health conscious, the development of fitness monitoring applications are on the rise. Being on top of the market, Fitbit ensures its productivity by the employment of machine learning methods. The trained machine learning models predicts user activities. This is achieved through data pre-processing, data processing and data partitioning. There is a need to improve the application in terms of additional purposes.

The above mentioned applications are like the tip of an iceberg. Machine learning being a subset of Artificial Intelligence finds its necessity in many other streams of daily activities.

comments

Go here to see the original:
Machine Learning: Real-life applications and it's significance in Data Science - Techstory

Inspur Re-Elected as Member of SPEC OSSC and Chair of SPEC Machine Learning – Yahoo Finance

Highlights:

Recently, the international evaluation agency Standard Performance Evaluation Corporation (SPEC) has finalized the election of new Open System Steering Committee (OSSC) executive members, which include Inspur, Intel, AMD, IBM, Oracle and other three companies.

It is worth noting that Inspur, a re-elected OSSC member, was also re-elected as the chair of the SPEC Machine Learning (SPEC ML) working group. The development plan of ML test benchmark proposed by Inspur has been approved by members which aims to provide users with standard on evaluating machine learning computing performance.

SPEC is a global and authoritative third-party application performance testing organization established in 1988, which aims to establish and maintain a series of performance, function, and energy consumption benchmarks, and provides important reference standards for users to evaluate the performance and energy efficiency of computing systems. The organization consists of 138 well-known technology companies, universities and research institutions in the industry such as Intel, Oracle, NVIDIA, Apple, Microsoft, Inspur, Berkeley, Lawrence Berkeley National Laboratory, etc., and its test standard has become an important indicator for many users to evaluate overall computing performance.

The OSSC executive committee is the permanent body of the SPEC OSG (short for Open System Group, the earliest and largest committee established by SPEC) and is responsible for supervising and reviewing the daily work of major technical groups of OSG, major issues, additions and deletions of members, development direction of research and decision of testing standards, etc. Meanwhile, OSSC executive committee uniformly manages the development and maintenance of SPEC CPU, SPEC Power, SPEC Java, SPEC Virt and other benchmarks.

Machine Learning is an important direction in AI development. Different computing accelerator technologies such as GPU, FPGA, ASIC, and different AI frameworks such as TensorFlow and Pytorch provide customers with a rich marketplace of options. However, the next important thing for the customer to consider is how to evaluate the computing efficiency of various AI computing platforms. Both enterprises and research institutions require a set of benchmarks and methods to effectively measure performance to find the right solution for their needs.

In the past year, Inspur has done much to advance the SPEC ML standard specific component development, contributing test models, architectures, use cases, methods and so on, which have been duly acknowledged by SPEC organization and its members.

Joe Qiao, General Manager of Inspur Solution and Evaluation Department, believes that SPEC ML can provide an objective comparison standard for AI / ML applications, which will help users choose a computing system that best meet their application needs. Meanwhile, it also provides a unified measurement standard for manufacturers to improve their technologies and solution capabilities, advancing the development of the AI industry.

About Inspur

Inspur is a leading provider of data center infrastructure, cloud computing, and AI solutions, ranking among the worlds top 3 server manufacturers. Through engineering and innovation, Inspur delivers cutting-edge computing hardware design and extensive product offerings to address important technology arenas like open computing, cloud data center, AI and deep learning. Performance-optimized and purpose-built, our world-class solutions empower customers to tackle specific workloads and real-world challenges. To learn more, please go to http://www.inspursystems.com.

View source version on businesswire.com: https://www.businesswire.com/news/home/20200221005123/en/

Contacts

Media Fiona LiuLiuxuan01@inspur.com

Read more:
Inspur Re-Elected as Member of SPEC OSSC and Chair of SPEC Machine Learning - Yahoo Finance

Artificial Intelligence and Machine Learning in the Operating Room – 24/7 Wall St.

Most applications of artificial intelligence (AI) and machine learning technology provide only data to physicians, leaving the doctors to form a judgment on how to proceed. Because AI doesnt actually perform any procedure or prescribe a course of medication, the software that diagnoses health problems does not have to pass a randomized clinical trial as do devices such as insulin pumps or new medications.

A new study published Monday at JAMA Network discusses a trial including 68 patients undergoing elective noncardiac surgery under general anesthesia. The object of the trial was to determine if a predictive early warning system for possible hypotension (low blood pressure) during the surgery might reduce the time-weighted average of hypotension episodes during the surgery.

In other words, not only would the device and its software keep track of the patients mean average blood pressure, but it would sound an alarm if an 85% or greater risk of a patients blood pressure falling below 65 mm of mercury (Hg) was possible in the next 15 minutes. The device also encouraged the anesthesiologist to take preemptive action.

Patients in the control group were connected to the same AI device and software, but only routine pulse and blood pressure data were displayed. That means that the anesthesiologist had no early warning about a hypotension event and could take no action to prevent the event.

Among patients fully connected to the device and software, the median time-weighted average of hypotension was 0.1 mm Hg, compared to an average of 0.44 mm Hg in the control group. In the control group, the median time of hypotension per patient was 32.7 minutes, while it was just 8.0 minutes among the other patients. Most important, perhaps, two patients in the control group died from serious adverse events, while no patients connected to the AI device and software died.

The algorithm used by the device was developed by different researchers who had trained the software on thousands of waveform features to identify a possible hypotension event 15 minutes before it occurs during surgery. The devices used were a Flotrac IQ sensor with the early warning software installed and a HemoSphere monitor. The devices are made by Edwards Lifesciences, and Edwards also had five of eight researchers among the developers of the algorithm. The study itself was conducted in the Netherlands at Amsterdam University Medical Centers.

In an editorial at JAMA Network, associate editor Derek Angus wrote:

The final model predicts the likelihood of future hypotension via measurement of multiple variables characterizing dynamic interactions between left ventricular contractility, preload, and afterload. Although clinicians can look at arterial pulse pressure waveforms and, in combination with other patient features, make educated guesses about the possibility of upcoming episodes of hypotension, the likelihood is high that an AI algorithm could make more accurate predictions.

Among the past decades biggest health news stories were the development of immunotherapies for cancer and a treatment for cystic fibrosis. AI is off to a good start in the new decade.

By Paul Ausick

View original post here:
Artificial Intelligence and Machine Learning in the Operating Room - 24/7 Wall St.

How businesses and governments should embrace AI and Machine Learning – TechCabal

Leadership team of credit-as-a-service startup Migo, one of a growing number of businesses using AI to create consumer-facing products.

The ability to make good decisions is literally the reason people trust you with responsibilities. Whether you work for a government or lead a team at a private company, your decision-making process will affect lives in very real ways.

Organisations often make poor decisions because they fail to learn from the past. Wherever a data-collection reluctance exists, there is a fair chance that mistakes will be repeated. Bad policy goals will often be a consequence of faulty evidentiary support, a failure to sufficiently look ahead by not sufficiently looking back.

But as Daniel Kahneman, author of Thinking Fast and Slow, says:

The idea that the future is unpredictable is undermined every day by the ease with which the past is explained. If governments and business leaders will live up to their responsibilities, enthusiastically embracing methodical decision-making tools should be a no-brainer.

Mass media representations project artificial intelligence in futuristic, geeky terms. But nothing could be further from the truth.

While it is indeed scientific, AI can be applied in practical everyday life today. Basic interactions with AI include algorithms that recommend articles to you, friend suggestions on social media and smart voice assistants like Alexa and Siri.

In the same way, government agencies can integrate AI into regular processes necessary for society to function properly.

Managing money is an easy example to begin with. AI systems can be used to streamline data points required during budget preparations and other fiscal processes. Based on data collected from previous fiscal cycles, government agencies could reasonably forecast needs and expectations for future years.

With its large trove of citizen data, governments could employ AI to effectively reduce inequalities in outcomes and opportunities. Big Data gives a birds-eye view of the population, providing adequate tools for equitably distributing essential infrastructure.

Perhaps a more futuristic example is in drafting legislation. Though a young discipline, legimatics includes the use of artificial intelligence in legal and legislative problem-solving.

Democracies like Nigeria consider public input a crucial aspect of desirable law-making. While AI cannot yet be relied on to draft legislation without human involvement, an AI-based approach can produce tools for specific parts of legislative drafting or decision support systems for the application of legislation.

In Africa, businesses are already ahead of most governments in AI adoption. Credit scoring based on customer data has become popular in the digital lending space.

However, there is more for businesses to explore with the predictive powers of AI. A particularly exciting prospect is the potential for new discoveries based on unstructured data.

Machine learning could broadly be split into two sections: supervised and unsupervised learning. With supervised learning, a data analyst sets goals based on the labels and known classifications of the dataset. The resulting insights are useful but do not produce the sort of new knowledge that comes from unsupervised learning processes.

In essence, AI can be a medium for market-creating innovations based on previously unknown insight buried in massive caches of data.

Digital lending became a market opportunity in Africa thanks to growing smartphone availability. However, customer data had to be available too for algorithms to do their magic.

This is why it is desirable for more data-sharing systems to be normalised on the continent to generate new consumer products. Fintech sandboxes that bring the public and private sectors together aiming to achieve open data standards should therefore be encouraged.

Artificial intelligence, like other technologies, is neutral. It can be used for social good but also can be diverted for malicious purposes. For both governments and businesses, there must be circumspection and a commitment to use AI responsibly.

China is a cautionary tale. The Communist state currently employs an all-watching system of cameras to enforce round-the-clock citizen surveillance.

By algorithmically rating citizens on a so-called social credit score, Chinas ultra-invasive AI effectively precludes individual freedom, compelling her 1.3 billion people to live strictly by the Politburos ideas of ideal citizenship.

On the other hand, businesses must be ethical in providing transparency to customers about how data is harvested to create products. At the core of all exchange must be trust, and a verifiable, measurable commitment to do no harm.

Doing otherwise condemns modern society to those dystopian days everybody dreads.

How can businesses and governments use Artificial Intelligence to find solutions to challenges facing the continent? Join entrepreneurs, innovators, investors and policymakers in Africas AI community at TechCabals emerging tech townhall. At the event, stakeholders including telcos and financial institutions will examine how businesses, individuals and countries across the continent can maximize the benefits of emerging technologies, specifically AI and Blockchain. Learn more about the event and get tickets here.

Continue reading here:
How businesses and governments should embrace AI and Machine Learning - TechCabal

How to Pick a Winning March Madness Bracket – Machine Learning Times – machine learning & data science news – The Predictive Analytics Times

Introduction

In 2019, over 40 million Americans wagered money on March Madness brackets, according to the American Gaming Association. Most of this money was bet in bracket pools, which consist of a group of people each entering their predictions of the NCAA tournament games along with a buy-in. The bracket that comes closest to being right wins. If you also consider the bracket pools where only pride is at stake, the number of participants is much greater. Despite all this attention, most do not give themselves the best chance to win because they are focused on the wrong question.

The Right Question

Mistake #3 in Dr. John Elders Top 10 Data Science Mistakes is to ask the wrong question. A cornerstone of any successful analytics project starts with having the right project goal; that is, to aim at the right target. If youre like most people, when you fill out your bracket, you ask yourself, What do I think is most likely to happen? This is the wrong question to ask if you are competing in a pool because the objective is to win money, NOT to make the most correct bracket. The correct question to ask is: What bracket gives me the best chance to win $? (This requires studying the payout formula. I used ESPN standard scoring (320 possible points per round) with all pool money given to the winner. (10 points are awarded for each correct win in the round of 64, 20 in the round of 32, and so forth, doubling until 320 are awarded for a correct championship call.))

While these questions seem similar, the brackets they produce will be significantly different.

If you ignore your opponents and pick the teams with the best chance to win games you will reduce your chance of winning money. Even the strongest team is unlikely to win it all, and even if they do, plenty of your opponents likely picked them as well. The best way to optimize your chances of making money is to choose a champion team with a good chance to win who is unpopular with your opponents.

Knowing how other people in your pool are filling out their brackets is crucial, because it helps you identify teams that are less likely to be picked. One way to see how others are filling out their brackets is via ESPNs Who Picked Whom page (Figure 1). It summarizes how often each team is picked to advance in each round across all ESPN brackets and is a great first step towards identifying overlooked teams.

Figure 1. ESPNs Who Picked Whom Tournament Challenge page

For a team to be overlooked, their perceived chance to win must be lower than their actual chance to win. The Who Picked Whom page provides an estimate of perceived chance to win, but to find undervalued teams we also need estimates for actual chance to win. This can range from a complex prediction model to your own gut feeling. Two sources I trust are 538s March Madness predictions and Vegas future betting odds. 538s predictions are based on a combination of computer rankings and has predicted performance well in past tournaments. There is also reason to pay attention to Vegas odds, because if they were too far off, the sportsbooks would lose money.

However, both sources have their flaws. 538 is based on computer ratings, so while they avoid human bias, they miss out on expert intuition. Most Vegas sportsbooks likely use both computer ratings and expert intuition to create their betting odds, but they are strongly motivated to have equal betting on all sides, so they are significantly affected by human perception. For example, if everyone was betting on Duke to win the NCAA tournament, they would increase Dukes betting odds so that more people would bet on other teams to avoid large losses. When calculating win probabilities for this article, I chose to average 538 and Vegas predictions to obtain a balance I was comfortable with.

Lets look at last year. Figure 2 compares a teams perceived chance to win (based on ESPNs Who Picked Whom) to their actual chance to win (based on 538-Vegas averaged predictions) for the leading 2019 NCAA Tournament teams. (Probabilities for all 64 teams in the tournament appear in Table 6 in the Appendix.)

Figure 2. Actual versus perceived chance to win March Madness for 8 top teams

As shown in Figure 2, participants over-picked Duke and North Carolina as champions and under-picked Gonzaga and Virginia. Many factors contributed to these selections; for example, most predictive models, avid sports fans, and bettors agreed that Duke was the best team last year. If you were the picking the bracket most likely to occur, then selecting Duke as champion was the natural pick. But ignoring selections made by others in your pool wont help you win your pool.

While this graph is interesting, how can we turn it into concrete takeaways? Gonzaga and Virginia look like good picks, but what about the rest of the teams hidden in that bottom left corner? Does it ever make sense to pick teams like Texas Tech, who had a 2.6% chance to win it all, and only 0.9% of brackets picking them? How much does picking an overvalued favorite like Duke hurt your chances of winning your pool?

To answer these questions, I simulated many bracket pools and found that the teams in Gonzagas and Virginias spots are usually the best picksthe most undervalued of the top four to five favorites. However, as the size of your bracket pool increases, overlooked lower seeds like third-seeded Texas Tech or fourth-seeded Virginia Tech become more attractive. The logic for this is simple: the chance that one of these teams wins it all is small, but if they do, then you probably win your pool regardless of the number of participants, because its likely no one else picked them.

Simulations Methodology

To simulate bracket pools, I first had to simulate brackets. I used an average of the Vegas and 538 predictions to run many simulations of the actual events of March Madness. As discussed above, this method isnt perfect but its a good approximation. Next, I used the Who Picked Whom page to simulate many human-created brackets. For each human bracket, I calculated the chance it would win a pool of size by first finding its percentile ranking among all human brackets assuming one of the 538-Vegas simulated brackets were the real events. This percentile is basically the chance it is better than a random bracket. I raised the percentile to the power, and then repeated for all simulated 538-Vegas brackets, averaging the results to get a single win probability per bracket.

For example, lets say for one 538-Vegas simulation, my bracket is in the 90th percentile of all human brackets, and there are nine other people in my pool. The chance I win the pool would be. If we assumed a different simulation, then my bracket might only be in the 20th percentile, which would make my win probability . By averaging these probabilities for all 538-Vegas simulations we can calculate an estimate of a brackets win probability in a pool of size , assuming we trust our input sources.

Results

I used this methodology to simulate bracket pools with 10, 20, 50, 100, and 1000 participants. The detailed results of the simulations are shown in Tables 1-6 in the Appendix. Virginia and Gonzaga were the best champion picks when the pool had 50 or fewer participants. Yet, interestingly, Texas Tech and Purdue (3-seeds) and Virginia Tech (4-seed) were as good or better champion picks when the pool had 100 or more participants.

General takeaways from the simulations:

Additional Thoughts

We have assumed that your local pool makes their selections just like the rest of America, which probably isnt true. If you live close to a team thats in the tournament, then that team will likely be over-picked. For example, I live in Charlottesville (home of the University of Virginia), and Virginia has been picked as the champion in roughly 40% of brackets in my pools over the past couple of years. If you live close to a team with a high seed, one strategy is to start with ESPNs Who Picked Whom odds, and then boost the odds of the popular local team and correspondingly drop the odds for all other teams. Another strategy Ive used is to ask people in my pool who they are picking. It is mutually beneficial, since Id be less likely to pick whoever they are picking.

As a parting thought, I want to describe a scenario from the 2019 NCAA tournament some of you may be familiar with. Auburn, a five seed, was winning by two points in the waning moments of the game, when they inexplicably fouled the other team in the act of shooting a three-point shot with one second to go. The opposing player, a 78% free throw shooter, stepped to the line and missed two out of three shots, allowing Auburn to advance. This isnt an alternate reality; this is how Auburn won their first-round game against 12-seeded New Mexico State. They proceeded to beat powerhouses Kansas, North Carolina, and Kentucky on their way to the Final Four, where they faced the exact same situation against Virginia. Virginias Kyle Guy made all his three free throws, and Virginia went on to win the championship.

I add this to highlight an important qualifier of this analysisits impossible to accurately predict March Madness. Were the people who picked Auburn to go to the Final Four geniuses? Of course not. Had Terrell Brown of New Mexico State made his free throws, they would have looked silly. There is no perfect model that can predict the future, and those who do well in the pools are not basketball gurus, they are just lucky. Implementing the strategies talked about here wont guarantee a victory; they just reduce the amount of luck you need to win. And even with the best modelsyoull still need a lot of luck. It is March Madness, after all.

Appendix: Detailed Analyses by Bracket Sizes

At baseline (randomly), a bracket in a ten-person pool has a 10% chance to win. Table 1 shows how that chance changes based on the round selected for a given team to lose. For example, brackets that had Virginia losing in the Round of 64 won a ten-person pool 4.2% of the time, while brackets that picked them to win it all won 15.1% of the time. As a reminder, these simulations were done with only pre-tournament informationthey had no data indicating that Virginia was the eventual champion, of course.

Table 1 Probability that a bracket wins a ten-person bracket pool given that it had a given team (row) making it to a given round (column) and no further

In ten-person pools, the best performing brackets were those that picked Virginia or Gonzaga as the champion, winning 15% of the time. Notably, early round picks did not have a big influence on the chance of winning the pool, the exception being brackets that had a one or two seed losing in the first round. Brackets that had a three seed or lower as champion performed very poorly, but having lower seeds making the Final Four did not have a significant impact on chance of winning.

Table 2 shows the same information for bracket pools with 20 people. The baseline chance is now 5%, and again the best performing brackets are those that picked Virginia or Gonzaga to win. Similarly, picks in the first few rounds do not have much influence. Michigan State has now risen to the third best Champion pick, and interestingly Purdue is the third best runner-up pick.

Table 2 Probability that a bracket wins a 20-person bracket pool given that it had a given team (row) making it to a given round (column) and no further

When the bracket pool size increases to 50, as shown in Table 3, picking the overvalued favorites (Duke and North Carolina) as champions significantly lowers your baseline chances (2%). The slightly undervalued two and three seeds now raise your baseline chances when selected as champions, but Virginia and Gonzaga remain the best picks.

Table 3 Probability that a bracket wins a 50-person bracket pool given that it had a given team (row) making it to a given round (column) and no further

With the bracket pool size at 100 (Table 4), Virginia and Gonzaga are joined by undervalued three-seeds Texas Tech and Purdue. Picking any of these four raises your baseline chances from 1% to close to 2%. Picking Duke or North Carolina again hurts your chances.

Table 4 Probability that a bracket wins a 100-person bracket pool given that it had a given team (row) making it to a given round (column) and no further

When the bracket pool grows to 1000 people (Table 5), there is a complete changing of the guard. Virginia Tech is now the optimal champion pick, raising your baseline chance of winning your pool from 0.1% to 0.4%, followed by the three-seeds and sixth-seeded Iowa State are the best champion picks.

Table 5 Probability that a bracket wins a 1000-person bracket pool given that it had a given team (row) making it to a given round (column) and no further

For Reference, Table 6 shows the actual chance to win versus the chance of being picked to win for all teams seeded seventh or better. These chances are derived from the ESPN Who Picked Whom page and the 538-Vegas predictions. The data for the top eight teams in Table 6 is plotted in Figure 2. Notably, Duke and North Carolina are overvalued, while the rest are all at least slightly undervalued.

The teams in bold in Table 6 are examples of teams that are good champion picks in larger pools. They all have a high ratio of actual chance to win to chance of being picked to win, but a low overall actual chance to win.

Table 6 Actual odds to win Championship vs Chance Team is Picked to Win Championship.

Undervalued teams in green; over-valued in red.

About the Author

Robert Robison is an experienced engineer and data analyst who loves to challenge assumptions and think outside the box. He enjoys learning new skills and techniques to reveal value in data. Robert earned a BS in Aerospace Engineering from the University of Virginia, and is completing an MS in Analytics through Georgia Tech.

In his free time, Robert enjoys playing volleyball and basketball, watching basketball and football, reading, hiking, and doing anything with his wife, Lauren.

Read the original:
How to Pick a Winning March Madness Bracket - Machine Learning Times - machine learning & data science news - The Predictive Analytics Times

Google Teaches AI To Play The Game Of Chip Design – The Next Platform

If it wasnt bad enough that Moores Law improvements in the density and cost of transistors is slowing. At the same time, the cost of designing chips and of the factories that are used to etch them is also on the rise. Any savings on any of these fronts will be most welcome to keep IT innovation leaping ahead.

One of the promising frontiers of research right now in chip design is using machine learning techniques to actually help with some of the tasks in the design process. We will be discussing this at our upcoming The Next AI Platform event in San Jose on March 10 with Elias Fallon, engineering director at Cadence Design Systems. (You can see the full agenda and register to attend at this link; we hope to see you there.) The use of machine learning in chip design was also one of the topics that Jeff Dean, a senior fellow in the Research Group at Google who has helped invent many of the hyperscalers key technologies, talked about in his keynote address at this weeks 2020 International Solid State Circuits Conference in San Francisco.

Google, as it turns out, has more than a passing interest in compute engines, being one of the large consumers of CPUs and GPUs in the world and also the designer of TPUs spanning from the edge to the datacenter for doing both machine learning inference and training. So this is not just an academic exercise for the search engine giant and public cloud contender particularly if it intends to keep advancing its TPU roadmap and if it decides, like rival Amazon Web Services, to start designing its own custom Arm server chips or decides to do custom Arm chips for its phones and other consumer devices.

With a certain amount of serendipity, some of the work that Google has been doing to run machine learning models across large numbers of different types of compute engines is feeding back into the work that it is doing to automate some of the placement and routing of IP blocks on an ASIC. (It is wonderful when an idea is fractal like that. . . .)

While the pod of TPUv3 systems that Google showed off back in May 2018 can mesh together 1,024 of the tensor processors (which had twice as many cores and about a 15 percent clock speed boost as far as we can tell) to deliver 106 petaflops of aggregate 16-bit half precision multiplication performance (with 32-bit accumulation) using Googles own and very clever bfloat16 data format. Those TPUv3 chips are all cross-coupled using a 3232 toroidal mesh so they can share data, and each TPUv3 core has its own bank of HBM2 memory. This TPUv3 pod is a huge aggregation of compute, which can do either machine learning training or inference, but it is not necessarily as large as Google needs to build. (We will be talking about Deans comments on the future of AI hardware and models in a separate story.)

Suffice it to say, Google is hedging with hybrid architectures that mix CPUs and GPUs and perhaps someday other accelerators for reinforcement learning workloads, and hence the research that Dean and his peers at Google have been involved in that are also being brought to bear on ASIC design.

One of the trends is that models are getting bigger, explains Dean. So the entire model doesnt necessarily fit on a single chip. If you have essentially large models, then model parallelism dividing the model up across multiple chips is important, and getting good performance by giving it a bunch of compute devices is non-trivial and it is not obvious how to do that effectively.

It is not as simple as taking the Message Passing Interface (MPI) that is used to dispatch work on massively parallel supercomputers and hacking it onto a machine learning framework like TensorFlow because of the heterogeneous nature of AI iron. But that might have been an interesting way to spread machine learning training workloads over a lot of compute elements, and some have done this. Google, like other hyperscalers, tends to build its own frameworks and protocols and datastores, informed by other technologies, of course.

Device placement meaning, putting the right neural network (or portion of the code that embodies it) on the right device at the right time for maximum throughput in the overall application is particularly important as neural network models get bigger than the memory space and the compute oomph of a single CPU, GPU, or TPU. And the problem is getting worse faster than the frameworks and hardware can keep up. Take a look:

The number of parameters just keeps growing and the number of devices being used in parallel also keeps growing. In fact, getting 128 GPUs or 128 TPUv3 processors (which is how you get the 512 cores in the chart above) to work in concert is quite an accomplishment, and is on par with the best that supercomputers could do back in the era before loosely coupled, massively parallel supercomputers using MPI took over and federated NUMA servers with actual shared memory were the norm in HPC more than two decades ago. As more and more devices are going to be lashed together in some fashion to handle these models, Google has been experimenting with using reinforcement learning (RL), a special subset of machine learning, to figure out where to best run neural network models at any given time as model ensembles are running on a collection of CPUs and GPUs. In this case, an initial policy is set for dispatching neural network models for processing, and the results are then fed back into the model for further adaptation, moving it toward more and more efficient running of those models.

In 2017, Google trained an RL model to do this work (you can see the paper here) and here is what the resulting placement looked like for the encoder and decoder, and the RL model to place the work on the two CPUs and four GPUs in the system under test ended up with 19.3 percent lower runtime for the training runs compared to the manually placed neural networks done by a human expert. Dean added that this RL-based placement of neural network work on the compute engines does kind of non-intuitive things to achieve that result, which is what seems to be the case with a lot of machine learning applications that, nonetheless, work as well or better than humans doing the same tasks. The issue is that it cant take a lot of RL compute oomph to place the work on the devices to run the neural networks that are being trained themselves. In 2018, Google did research to show how to scale computational graphs to over 80,000 operations (nodes), and last year, Google created what it calls a generalized device placement scheme for dataflow graphs with over 50,000 operations (nodes).

Then we start to think about using this instead of using it to place software computation on different computational devices, we started to think about it for could we use this to do placement and routing in ASIC chip design because the problems, if you squint at them, sort of look similar, says Dean. Reinforcement learning works really well for hard problems with clear rules like Chess or Go, and essentially we started asking ourselves: Can we get a reinforcement learning model to successfully play the game of ASIC chip layout?

There are a couple of challenges to doing this, according to Dean. For one thing, chess and Go both have a single objective, which is to win the game and not lose the game. (They are two sides of the same coin.) With the placement of IP blocks on an ASIC and the routing between them, there is not a simple win or lose and there are many objectives that you care about, such as area, timing, congestion, design rules, and so on. Even more daunting is the fact that the number of potential states that have to be managed by the neural network model for IP block placement is enormous, as this chart below shows:

Finally, the true reward function that drives the placement of IP blocks, which runs in EDA tools, takes many hours to run.

And so we have an architecture Im not going to get a lot of detail but essentially it tries to take a bunch of things that make up a chip design and then try to place them on the wafer, explains Dean, and he showed off some results of placing IP blocks on a low-powered machine learning accelerator chip (we presume this is the edge TPU that Google has created for its smartphones), with some areas intentionally blurred to keep us from learning the details of that chip. We have had a team of human experts places this IP block and they had a couple of proxy reward functions that are very cheap for us to evaluate; we evaluated them in two seconds instead of hours, which is really important because reinforcement learning is one where you iterate many times. So we have a machine learning-based placement system, and what you can see is that it sort of spreads out the logic a bit more rather than having it in quite such a rectangular area, and that has enabled it to get improvements in both congestion and wire length. And we have got comparable or superhuman results on all the different IP blocks that we have tried so far.

Note: I am not sure we want to call AI algorithms superhuman. At least if you dont want to have it banned.

Anyway, here is how that low-powered machine learning accelerator for the RL network versus people doing the IP block placement:

And here is a table that shows the difference between doing the placing and routing by hand and automating it with machine learning:

And finally, here is how the IP block on the TPU chip was handled by the RL network compared to the humans:

Look at how organic these AI-created IP blocks look compared to the Cartesian ones designed by humans. Fascinating.

Now having done this, Google then asked this question: Can we train a general agent that is quickly effective at placing a new design that it has never seen before? Which is precisely the point when you are making a new chip. So Google tested this generalized model against four different IP blocks from the TPU architecture and then also on the Ariane RISC-V processor architecture. This data pits people working with commercial tools and various levels tuning on the model:

And here is some more data on the placement and routing done on the Ariane RISC-V chips:

You can see that experience on other designs actually improves the results significantly, so essentially in twelve hours you can get the darkest blue bar, Dean says, referring to the first chart above, and then continues with the second chart above. And this graph showing the wireline costs where we see if you train from scratch, it actually takes the system a little while before it sort of makes some breakthrough insight and was able to significantly drop the wiring cost, where the pretrained policy has some general intuitions about chip design from seeing other designs and people that get to that level very quickly.

Just like we do ensembles of simulations to do better weather forecasting, Dean says that this kind of AI-juiced placement and routing of IP block sin chip design could be used to quickly generate many different layouts, with different tradeoffs. And in the event that some feature needs to be added, the AI-juiced chip design game could re-do a layout quickly, not taking months to do it.

And most importantly, this automated design assistance could radically drop the cost of creating new chips. These costs are going up exponentially, and data we have seen (thanks to IT industry luminary and Arista Networks chairman and chief technology officer Andy Bechtolsheim), an advanced chip design using 16 nanometer processes cost an average of $106.3 million, shifting to 10 nanometers pushed that up to $174.4 million, and the move to 7 nanometers costs $297.8 million, with projections for 5 nanometer chips to be on the order of $542.2 million. Nearly half of that cost has been and continues to be for software. So we know where to target some of those costs, and machine learning can help.

The question is will the chip design software makers embed AI and foster an explosion in chip designs that can be truly called Cambrian, and then make it up in volume like the rest of us have to do in our work? It will be interesting to see what happens here, and how research like that being done by Google will help.

Read the rest here:
Google Teaches AI To Play The Game Of Chip Design - The Next Platform

How to Train Your AI Soldier Robots (and the Humans Who Command Them) – War on the Rocks

Editors Note: This article was submitted in response to thecall for ideas issued by the co-chairs of the National Security Commission on Artificial Intelligence, Eric Schmidt and Robert Work. It addresses the third question (part a.), which asks how institutions, organizational structures, and infrastructure will affect AI development, and will artificial intelligence require the development of new institutions or changes to existing institutions.

Artificial intelligence (AI) is often portrayed as a single omnipotent force the computer as God. Often the AI is evil, or at least misguided. According to Hollywood, humans can outwit the computer (2001: A Space Odyssey), reason with it (Wargames), blow it up (Star Wars: The Phantom Menace), or be defeated by it (Dr. Strangelove). Sometimes the AI is an automated version of a human, perhaps a human fighters faithful companion (the robot R2-D2 in Star Wars).

These science fiction tropes are legitimate models for military discussion and many are being discussed. But there are other possibilities. In particular, machine learning may give rise to new forms of intelligence; not natural, but not really artificial if the term implies having been designed in detail by a person. Such new forms of intelligence may resemble that of humans or other animals, and we will discuss them using language associated with humans, but we are not discussing robots that have been deliberately programmed to emulate human intelligence. Through machine learning they have been programmed by their own experiences. We speculate that some of the characteristics that humans have evolved over millennia will also evolve in future AI, characteristics that have evolved purely for their success in a wide range of situations that are real, for humans, or simulated, for robots.

As the capabilities of AI-enabled robots increase, and in particular as behaviors emerge that are both complex and outside past human experience, how will we organize, train, and command them and the humans who will supervise and maintain them? Existing methods and structures, such as military ranks and doctrine, that have evolved over millennia to manage the complexity of human behavior will likely be necessary. But because robots will evolve new behaviors we cannot yet imagine, they are unlikely to be sufficient. Instead, the military and its partners will need to learn new types of organization and new approaches to training. It is impossible to predict what these will be but very possible they will differ greatly from approaches that have worked in the past. Ongoing experimentation will be essential.

How to Respond to AI Advances

The development of AI, especially machine learning, will lead to unpredictable new types of robots. Advances in AI suggest that humans will have the ability to create many types of robots, of different shapes, sizes, or degrees of independence or autonomy. It is conceivable that humans may one day be able to design tiny AI bullets to pierce only designated targets, automated aircraft to fly as loyal wingmen alongside human pilots, or thousands of AI fish to swim up an enemys river. Or we could design AI not as a device but as a global grid that analyzes vast amounts of diverse data. Multiple programs funded by the Department of Defense are on their way to developing robots with varying degrees of autonomy.

In science fiction, robots are often depicted as behaving in groups (like the robot dogs in Metalhead). Researchers inspired by animal behaviors have developed AI concepts such as swarms, in which relatively simple rules for each robot can result in complex emergent phenomena on a larger scale. This is a legitimate and important area of investigation. Nevertheless, simply imitating the known behaviors of animals has its limits. After observing the genocidal nature of military operations among ants, biologists Bert Holldobler and E. O. Wilson wrote, If ants had nuclear weapons, they would probably end the world in a week. Nor would we want to limit AI to imitating human behavior. In any case, a major point of machine learning is the possibility of uncovering new behaviors or strategies. Some of these will be very different from all past experience; human, animal, and automated. We will likely encounter behaviors that, although not human, are so complex that some human language, such as personality, may seem appropriately descriptive. Robots with new, sophisticated patterns of behavior may require new forms of organization.

Military structure and scheme of maneuver is key to victory. Groups often fight best when they dont simply swarm but execute sophisticated maneuvers in hierarchical structures. Modern military tactics were honed over centuries of experimentation and testing. This was a lengthy, expensive, and bloody process.

The development of appropriate organizations and tactics for AI systems will also likely be expensive, although one can hope that through the use of simulation it will not be bloody. But it may happen quickly. The competitive international environment creates pressure to use machine learning to develop AI organizational structure and tactics, techniques, and procedures as fast as possible.

Despite our considerable experience organizing humans, when dealing with robots with new, unfamiliar, and likely rapidly-evolving personalities we confront something of a blank slate. But we must think beyond established paradigms, beyond the computer as all-powerful or the computer as loyal sidekick.

Humans fight in a hierarchy of groups, each soldier in a squad or each battalion in a brigade exercising a combination of obedience and autonomy. Decisions are constantly made at all levels of the organization. Deciding what decisions can be made at what levels is itself an important decision. In an effective organization, decision-makers at all levels have a good idea of how others will act, even when direct communication is not possible.

Imagine an operation in which several hundred underwater robots are swimming up a river to accomplish a mission. They are spotted and attacked. A decision must be made: Should they retreat? Who decides? Communications will likely be imperfect. Some mid-level commander, likely one of the robot swimmers, will decide based on limited information. The decision will likely be difficult and depend on the intelligence, experience, and judgment of the robot commander. It is essential that the swimmers know who or what is issuing legitimate orders. That is, there will have to be some structure, some hierarchy.

The optimal unit structure will be worked out through experience. Achieving as much experience as possible in peacetime is essential. That means training.

Training Robot Warriors

Robots with AI-enabled technologies will have to be exercised regularly, partly to test them and understand their capabilities and partly to provide them with the opportunity to learn from recreating combat. This doesnt mean that each individual hardware item has to be trained, but that the software has to develop by learning from its mistakes in virtual testbeds and, to the extent that they are feasible, realistic field tests. People learn best from the most realistic training possible. There is no reason to expect machines to be any different in that regard. Furthermore, as capabilities, threats, and missions evolve, robots will need to be continuously trained and tested to maintain effectiveness.

Training may seem a strange word for machine learning in a simulated operational environment. But then, conventional training is human learning in a controlled environment. Robots, like humans, will need to learn what to expect from their comrades. And as they train and learn highly complex patterns, it may make sense to think of such patterns as personalities and memories. At least, the patterns may appear that way to the humans interacting with them. The point of such anthropomorphic language is not that the machines have become human, but that their complexity is such that it is helpful to think in these terms.

One big difference between people and machines is that, in theory at least, the products of machine learning, the code for these memories or personalities, can be uploaded directly from one very experienced robot to any number of others. If all robots are given identical training and the same coded memories, we might end up with a uniformity among a units members that, in the aggregate, is less than optimal for the unit as a whole.

Diversity of perspective is accepted as a valuable aid to human teamwork. Groupthink is widely understood to be a threat. Its reasonable to assume that diversity will also be beneficial to teams of robots. It may be desirable to create a library of many different personalities or memories that could be assigned to different robots for particular missions. Different personalities could be deliberately created by using somewhat different sets of training testbeds to develop software for the same mission.

If AI can create autonomous robots with human-like characteristics, what is the ideal personality mix for each mission? Again, we are using the anthropomorphic term personality for the details of the robots behavior patterns. One could call it a robots programming if that did not suggest the existence of an intentional programmer. The robots personalities have evolved from the robots participation in a very large number of simulations. It is unlikely that any human will fully understand a given personality or be able to fully predict all aspects of a robots behavior.

In a simple case, there may be one optimum personality for all the robots of one type. In more complicated situations, where robots will interact with each other, having robots that respond differently to the same stimuli could make a unit more robust. These are things that military planners can hope to learn through testing and training. Of course, attributes of personality that may have evolved for one set of situations may be less than optimal, or positively dangerous, in another. We talk a lot about artificial intelligence. We dont discuss artificial mental illness. But there is no reason to rule it out.

Of course, humans will need to be trained to interact with the machines. Machine learning systems already often exhibit sophisticated behaviors that are difficult to describe. Its unclear how future AI-enabled robots will behave in combat. Humans, and other robots, will need experience to know what to expect and to deal with any unexpected behaviors that may emerge. Planners need experience to know which plans might work.

But the human-robot relationship might turn out to be something completely different. For all of human history, generals have had to learn their soldiers capabilities. They knew best exactly what their troops could do. They could judge the psychological state of their subordinates. They might even know when they were being lied to. But todays commanders do not know, yet, what their AI might prove capable of. In a sense, it is the AI troops that will have to train their commanders.

In traditional military services, the primary peacetime occupation of the combat unit is training. Every single servicemember has to be trained up to the standard necessary for wartime proficiency. This is a huge task. In a robot unit, planners, maintainers, and logisticians will have to be trained to train and maintain the machines but may spend little time working on their hardware except during deployment.

What would the units look like? What is the optimal unit rank structure? How does the human rank structure relate to the robot rank structure? There are a million questions as we enter uncharted territory. The way to find out is to put robot units out onto test ranges where they can operate continuously, test software, and improve machine learning. AI units working together can learn and teach each other and humans.

Conclusion

AI-enabled robots will need to be organized, trained, and maintained. While these systems will have human-like characteristics, they will likely develop distinct personalities. The military will need an extensive training program to inform new doctrines and concepts to manage this powerful, but unprecedented, capability.

Its unclear what structures will prove effective to manage AI robots. Only by continuous experimentation can people, including computer scientists and military operators, understand the developing world of multi-unit human and robot forces. We must hope that experiments lead to correct solutions. There is no guarantee that we will get it right. But there is every reason to believe that as technology enables the development of new and more complex patterns of robot behavior, new types of military organizations will emerge.

Thomas Hamilton is a Senior Physical Scientist at the nonprofit, nonpartisan RAND Corporation. He has a Ph.D. in physics from Columbia University and was a research astrophysicist at Harvard, Columbia, and Caltech before joining RAND. At RAND he has worked extensively on the employment of unmanned air vehicles and other technology issues for the Defense Department.

Image: Wikicommons (U.S. Air Force photo by Kevin L. Moses Sr.)

View original post here:
How to Train Your AI Soldier Robots (and the Humans Who Command Them) - War on the Rocks

Not fasting is killing us, but fasting can hurt us too. Here’s what to do. – Mashable

There's a switch inside every cell in your body. Flip it on and you're in growth mode. Your cells start dividing but in the process, they make a lot of junk like mis-folded proteins, which help create the conditions for our biggest diseases (including cardiovascular, Alzheimer's and the big C). Flip the switch off, though, and your cells literally take out the trash leaving them clean, renewed, effectively young.

We know how to flip the switch. The trick is figuring out when. Because leaving your body in cleanup mode for too long can also be extremely bad for your health, in the much shorter term. Doing so has been the cause of anxiety, misery and disorder, for decades. It's also known as starvation.

The delicate dance of food consumption is at the heart of The Switch, a new book about new body-energy science and how it can help us live longer. Author and research scientist James Clement studies people who reach the age of 110; Harvard's David Sinclair, who recently wrote a groundbreaking book on the end of aging, is his mentor. As Clement's book hit shelves, an unrelated study in Nature confirmed its premise: mTOR (your genetic "on" switch) cannot coexist with autophagy (trash removal), and that is "implicated in metabolic disorders, neuro-degeneration, cancer and aging," the study said.

In other words: We age faster, get sicker and harm our brains when we fill the hours we're awake with food, day in and day out. Organic beings need more of a break than just a good night's rest in order to properly take out the trash. We're the opposite of automobiles. We break down eventually unless we run out of fuel. (Glycogen, which is what the body converts food into, is our gas.)

These revelations shed a new spotlight on fasting, the main way to induce autophagy (you can also kickstart it with intense exercise on a mostly empty stomach). But this is where we run into problems, and not just because autophagy literally translates to "eating yourself." (It can be hard for scientists to explain that this is actually a good thing and that all living things do it, from simple yeast all the way up to primates; we were designed to work this way by millennia of feast and famine.)

The problem isn't the science, it's the culture. For most of history, fasting was locked into human lives at a steady, healthy pace in some form of ritual, religious or otherwise. But in the modern world, we make our own rituals, and they easily shade into obsessions. This happens a lot with new diets: We get the zeal of the convert. We bore our friends to death with the particulars. And we take it too far, which in the case of fasting can be dangerous.

In a column published this week, the New York Times' veteran health columnist Jane Brody came around to the value of intermittent fasting. But she sounded a personal note of caution: "For people with a known or hidden tendency to develop an eating disorder, fasting can be the perfect trigger, which I discovered in my early 20s. In trying to control my weight, I consumed little or nothing all day, but once I ate in the evening, I couldnt stop and ended up with a binge eating disorder."

Something similar, at least to the first part of that story, seems to have happened to Twitter CEO Jack Dorsey. Last year Dorsey boasted about fasting for 22 hours, eating just one meal at dinnertime, and skipping food for the whole damn weekend. "I felt like I was hallucinating," he enthused, boasting of his increased focus and euphoria.

But as many withering articles pointed out, Dorsey's words would have triggered concern if they came from the mouth of a teenage girl since focus and euphoria can also be early signs of anorexia and bulimia. Clearly there is a tangled set of gendered assumptions at play here. "Its both remarkable and depressing to watch Jack Dorsey blithely describe a diet that would put any woman or any non-wealthy man into the penalty box of public opinion," wrote Washington Post columnist Monica Hesse.

That's not what The Switch is about. Clement doesn't endorse Dorsey's extreme approach, since the research shows benefits diminish after 16 hours of fasting. "I have friends who are bulimic, I know how serious a problem it is," he said when I raised the issue. "The kind of fasting that I'm talking about is just making sure your mTOR and autophagy are in balance."

Indeed, The Switch is a very balanced book, with plenty of nuanced suggestions for how you can make your food situation just a little bit better without making too many radical changes. (That probably explains why it hasn't taken off on the diet book media circuit, which tends to favor rules that are extreme, unusual, and headline-friendly.)

Here's a breakdown of Clement's advice.

Like most medicine, the mTOR switch is good for you if used at the correct dose, and poison at high doses. There's a reason it exists: It's your body's way of saying "times are good, let's grow muscle and fat!" Fat isn't inherently bad for you, either on your body or in your diet. Indeed, the good fats are what Clement suggests we consume the most fish, avocados, plant-based oils and nuts, macadamias especially alongside regular greens, most legumes and a little fruit.

If you're cutting down the amount of time you eat, then the content of your meals matters more. Clement himself gets good results from a meatless version of the ketogenic diet, which he says makes him less hungry but he doesn't rule out other diets that focus on good fat and fiber.

At the very least, be sure to avoid the stuff that spikes blood sugar. It will make you too hungry too soon, which will make autophagy impossible. You didn't think this whole Switch thing was going to give you permission to snarf on soda and hot dogs, did you?

Well, it does, actually just very occasionally.

Clement brings a lot of science on protein to the table, and the bad news is you're probably eating way more of it than you think you need. Animal protein flips the mTOR switch into high gear (which is why Clement is into mostly vegan keto). Sadly, so does regular dairy, and as a milk fan I found the new studies on this particularly hard reading.

But it makes evolutionary sense. Cow milk is designed to make calves grow many sizes in a short space of time, and the way you do that is by activating the mTOR pathway. So it's hard to switch into autophagy if you're chugging milk all the time. (Non-cow milks and cheeses seem to be fine, mTOR-wise.)

Which isn't to say you can't have meat and milk at all. This isn't one of those fundamentally restrictive diets we always break. Clement suggests dividing the week or month or year into growth and fasting phases. You might decide to eat as much as you want for three months of the year (which takes care of the holidays problem), say, or try doing the fasting thing for five days a month.

Whichever way you do it, the sweet spot seems to put you in growth mode around 20 percent of the time. But that's not a hard and fast number, because again, this isn't one-size-fits-all. (It certainly doesn't apply to kids, who need to grow more like calves.) I told Clement that after reading the book I was thinking of only allowing myself meat or milk on the weekends; he enthusiastically endorsed the idea.

Ready to turn on autophagy for its disease-fighting benefits? Ready to avoid doing it too much? Ready to eat more nutritious food when you break your fast? Then it's time to figure out how long you want to fast for and you'll be surprised about how little time it takes to see the effects.

The math varies from human to human, but "you only have about six to 10 hours worth of glycogen stored in your body at any given time," says Clement. "So you can actually burn through those overnight if you didn't load up with carbs in your evening meal or 11 o'clock snacks."

That provides one particularly effortless way to fast for those of us who don't wake up hungry (and if you're eating the right stuff, you generally won't). Let's say you ate your last bite at 9 p.m. and wake up at 7 a.m. Congratulations, you're already out of glycogen and in autophagy! Now the question is: how long is it comfortable for you to stay foodless, bearing in mind you don't want to go past a total of 16 hours? (In this example, that would be 1 p.m.)

You'll definitely want to hydrate immediately, of course: Sleep literally shrivels your brain. You might want to drink some coffee, which enhances autophagy (the all-time Guinness World Record oldest human, Jeanne Calment of France, took no breakfast but coffee, and died at 122). If you can stand to do so, this would be a great time to work out. Exercise seems to act like an autophagy power up; one study suggests working up a sweat might boost our cells' trash-cleaning effectiveness all the way up to the 80-minute mark.

So if you went from 9 p.m. to 1 p.m., or whatever 16-hour period suits your schedule (7 p.m. to 11 a.m. seems to be a popular one for fasters who don't make late dinner reservations, and it is easily remembered as "7-11"), then congratulations. You just did the maximally beneficial fast. Take that, Jack Dorsey.

But if you didn't? No sweat. If you only made it until 10 a.m., or 8 a.m. before needing food, your entire body still got a boost of cleanup time. And if you needed an immediate breakfast, that's fine too. Fasting doesn't have to happen every day; in fact it's imperative that it doesn't. Every morning is an opportunity to listen to your body and see if it's ready for a quick restorative food break.

Everyone who's ever tried to diet knows the terrible guilt that comes after grabbing obviously bad food, Don't stress over it, says Clement. Don't be maniacal. The whole point is to be in balance. We all need mTOR-boosting feasts from time to time. "It's fine to have one pepperoni pizza on a Sunday, or whatever," he says. So long as you're eating well most of the time and fasting every now and again, you'll see positive effects.

And if you can't fast at all and can't stop snacking? No worries, just change what you're eating. "If you switch over to snacking on either very low glycemic veggies like broccoli tops or carrots, or nuts, then you're not going to be replenishing your glycogen stores," Clement says. Stick a small bowl of almonds and blueberries in the kitchen and you'll be surprised, over time, at how little it takes to satisfy supposedly giant cravings.

That was what I learned, not from Clement's book, but from David Sinclair's. The Harvard geneticist and Clement mentor doesn't focus so much on lengthy fasts, although he takes a number of fast-mimicking supplements. His dieting approach is to simply eat less, to "flip a switch in your head that allows you to be OK with being a little hungry." For some of us, such small moves may be more effective than going all-out on a new diet.

If youd like to talk to someone about your eating behaviors, call the National Eating Disorder Associations helpline at 800-931-2237. You can also text NEDA to 741-741 to be connected with a trained volunteer at the Crisis Text Line or visit NEDA's website for more information.

Read this article:
Not fasting is killing us, but fasting can hurt us too. Here's what to do. - Mashable

Oxford Performance Materials’ OsteoFab 3D Printed PEKK Technology Focus of Study Published in The Spine Journal – OrthoSpineNews

SOUTH WINDSOR, CONN. (PRWEB)FEBRUARY 17, 2020

Oxford Performance Materials, Inc. (OPM), an industry leader in advanced materials science and high-performance additive manufacturing (HPAM), announced today the publication of A Comparative Study of Three Biomaterials in an Ovine Defect Model: A TETRAfuse PEKK Study in The Spine Journal. 1,2,3 This study examined the in vivo material characteristics of polyetheretherketone (PEEK), titanium-coated PEEK, and 3D printed polyetherketoneketone (PEKK) in a sheep model. In comparison with PEEK, the PEKK implants displayed bone ingrowth, no fibrotic tissue formation, a significant increase in bony apposition over time, and a significantly higher push-out strength.

Conventionally, PEEK and Ti-coated PEEK have been used as standard biomaterials for implants like spinal interbody cages, but recent shortcomings in these materials have led to adoption of newer, more innovative technologies. Although PEEK shows an elastic modulus comparable to that of cortical bone, literature has illustrated that it consistently prompts a fibrotic and inflammatory tissue response, preventing it from integrating with host tissue. And while titanium exhibits similar osseointegrative properties when compared to PEKK, it is substantially stiffer than cortical bone and it is radiopaque, which makes bone fusion assessments difficult as the bone/implant interface is often obscured in post-operative imaging. With titanium coated PEEK implants, these drawbacks still exist but with the added risks of delamination of the titanium coating, subsidence, and the generation of wear debris.

The results reported by The Spine Journal were gratifying and support the comparative benefits of 3D printed PEKK implants that we have been hearing from surgeons for some time, now, said Scott DeFelice, CEO. OPMs OsteoFab technology platform is increasingly recognized as a best of solution for CMF and spinal implants, and we will be launching our unique 3D printed suture anchor product in the coming weeks.

3D printed PEKK delivers high mechanical integrity, radiographic visibility, and osseointegration, as well as inherent antibacterial characteristics.4 In this Spine Journal study, PEKK demonstrated a significantly higher push-out force when compared to PEEK at 8 and 16 weeks post-implantation and also had notably greater bone attachment following pushout when compared to PEEK and Ti-coated PEEK. From a histological standpoint, 3D printed PEKK also showed substantial bone growth. Within a 2mm radius of the implant, 3D printed PEKK exhibited the highest bone ongrowth percentage when compared to PEEK and Ti-coated PEEK at both the 8- and 16-week endpoints.

By directly comparing the three implant materials in an in vivo model, the study showed clear evidence of the performance characteristics at the bone-implant interface. In this instance, 3D printed PEKK presented a high propensity for bone-ingrowth, no radiographic interference, and a material structure that allowed for an increase of integration of cancellous bone into the implant. In a clinical scenario, 3D printed PEKK implants could improve the effectiveness of spinal fusion procedures by promoting osseointegration and decreasing the chance of complications associated with PEEK and Ti-coated PEEK.

Since 2013, OPM has been manufacturing patient-specific cranial and facial implant devices that have been distributed world-wide. In addition to over 2,300 craniomaxillofacial implants, OPM has 3D printed over 70,000 OsteoFab implants under a number of 510(k) clearances and just recently entered the sports medicine arena with a soft tissue fixation device. As the pendulum shifts away from traditional material solutions, OsteoFab 3D printed PEKK is proving to be a robust alternative with a rapidly growing user base.

About Oxford Performance Materials, Inc.

Oxford Performance Materials was founded in 2000 to exploit and commercialize the worlds highest performing thermoplastic, PEKK (poly-ether-ketone-ketone). OPMs Materials business has developed a range of proprietary, patented technologies for the synthesis and modification of a range of PAEK polymers that are sold under its OXPEKK brand for biomedical and industrial applications. The Company is a pioneer in 3D printing. OPM Biomedicals OsteoFab technology is in commercial production in numerous orthopedic implant applications, including cranial, facial, spinal, and sports medicine devices. OPM is the first and only company to receive FDA 510(k) clearance to manufacture 3D printed patient-specific polymeric implants and has six 510(k) clearances in its portfolio. OPM Industrial produces 3D printed OXFAB production parts for highly demanding applications in the energy, transportation and semiconductor markets. OXFAB structures offer significant weight, cost, and time-to-market reductions that are defined in a set of specified performance attributes in the exhaustive OPM B-Basis database, developed in conjunction with NASA. For more information, please visit:http://www.oxfordpm.com

Company Contact:Willow JohndrowDirector of Marketing860.656.9442

References1. Cheng, PhD B, Jaffee S, Swink I, Averick, PhD S, Horvath S, Zhukauskas, PhD R et al. A Comparative Study of Three Biomaterials in an Ovine Bone Defect Model: A TETRAfuse PEKK Study. The Spine Journal. 2019. doi: 10.1016/j.spinee.2019.10.0032. RESULTS paragraph from the Study abstract reads: PEKK implants demonstrated bone ingrowth, no radiographic interference, no fibrotic tissue membrane formation, significant increase in bony apposition over time, and significantly higher push-out strength compared to standard PEEK. The PEKK implant displayed bone growth characteristics comparable to Ti-coated PEEK with significant improvements in implant integrity and radiographic properties.3. Note: TETRAfuse is a Registered Trademark of RTI Surgical, Inc. and the tradename for RTIs spinal implants that are additively manufactured by Oxford Performance Materials, Inc. using OPMs proprietary OsteoFab technology platform. TETRAfuse was awarded a 2019 MedTech Breakthrough Award for Best New Technology Solution Orthopedics and a 2018 Spine Technology Award from Orthopedics This Week.4. Wang M, Bhardwaj B, Webster T; Antibacterial properties of PEKK for orthopedic applications. Intl Journal of Nanomedicine. 2017: 12 6471-6476.

Read the original post:
Oxford Performance Materials' OsteoFab 3D Printed PEKK Technology Focus of Study Published in The Spine Journal - OrthoSpineNews

Jatenzo, an Oral Testosterone Replacement Therapy, Now Available – Renal and Urology News

Jatenzo (testosterone undecanoate; Clarus Therapeutics), an oral testosterone replacement therapy, is now available for the treatment of hypogonadism.

Specifically, Jatenzo is indicated for testosterone replacement therapy in adult males for conditions associated with a deficiency or absence of endogenous testosterone:

Jatenzo is not intended for use in males with age-related hypogonadism and its safety and efficacy have not been established in males <18 years old.

The treatment carries a Boxed Warning related to blood pressure (BP) increases that could potentially increase the risk of major adverse cardiovascular events. In a clinical trial, Jatenzo increased systolic BP during 4 months of treatment by an average of 4.9 mmHg based on ambulatory BP monitoring and by an average of 2.8 mmHg from baseline based on BP cuff measurements. For this reason, baseline cardiovascular risk should be considered before initiating therapy and BP should be adequately controlled. Among study patients treated with Jatenzo, 7% were started on antihypertensive medications or required intensification of their antihypertensive medication regimen during the 4-month trial.

Jatenzo, a Schedule III controlled substance, is available in 158mg, 198mg, and 237mg softgels. Dosage should be individualized based on serum testosterone concentrations.

Jatenzo offers patients a convenient softgel formulation, and eliminates the worry of gel transference, skin irritation from patches, or pain from injections that other testosterone treatments carry, said Dr Ronald S. Swerdloff, lead investigator of the inTUne trial, the pivotal study that established the safety and efficacy of the treatment.

For more information visit jatenzo.com.

This article originally appeared on MPR

See original here:
Jatenzo, an Oral Testosterone Replacement Therapy, Now Available - Renal and Urology News

Clarus Therapeutics Lauches JATENZO – Oral Testosterone Replacement Therapy – MedicalResearch.com

MedicalResearch.com Interview with:

Robert E. Dudley, Ph.D.Chairman, Chief Executive Officer and PresidentClarus Therapeutics

Dr. Dudley discusses the recent announcement that Clarus Therapeutics, Inc. has launched JATENZO (testosterone undecanoate) capsules for the treatment of appropriate men with testosterone deficiency (hypogonadism):

MedicalResearch.com: What is the background for this announcement?

Response: JATENZOis the first and only oral softgel testosterone undecanoate and the first oral testosterone product approved by the U.S. FDA in more than 60 years.JATENZO is indicated for testosterone replacement therapy in adult males for conditions associated with a deficiency or absence of endogenous testosterone.

The launch of JATENZO means that physicians and men living with testosterone deficiency due to genetic or structural abnormalities finally have a safe and effective oral testosterone replacement therapy. We are proud to commercially launch this unique oral formulation to healthcare providers and the appropriate patients who they treat. JATENZO is now available at pharmacies across the country.

MedicalResearch.com: What are the main findings of the underlying studies?

Response: JATENZO was evaluated in a Phase 3 pivotal trial among 166 adult, hypogonadal men in a 4-month, open-label study with a topical testosterone comparator arm. The starting dose was 237 mg twice daily (BID) with meals. Dose adjustments (minimum 158 mg BID; maximum 396 mg BID) were made roughly 3 and 7 weeks after initiation of JATENZO based on average circulating testosterone concentration levels. 87% of JATENZO patients reached testosterone levels within the normal eugonadal range at the end of the study; peak testosterone levels were in close alignment with FDA targets.

Across all Phase 2 and Phase 3 trials combined, the safety of JATENZO has been evaluated in 569 patients who were treated with JATENZO for up to two (2) years. Liver toxicity was not observed with JATENZO in clinical trials.

Mild gastrointestinal adverse events observed with JATENZO were transient, manageable and did not lead to discontinuation.Decreased HDL cholesterol and increased hematocrit were associated with JATENZO use but did not lead to discontinuation of JATENZO. Only three of the 166 patients (1.8%) in the 4-month study experienced adverse reactions that led to premature discontinuation from the study, including rash (n=1) and headache (n=2). JATENZO was associated with an increase in systolic blood pressure. A boxed warning about the potential risks associated with elevated blood pressure appears on JATENZO labeling. Patients on JATENZO should have their blood pressure monitored.

Among the 569 patients who received JATENZO in all Phase 2 and 3 trials combined, the following adverse reactions were reported in >2% of patients: polycythemia, diarrhea, dyspepsia, eructation (i.e., burping), peripheral edema, nausea, increased hematocrit, headache, prostatomegaly (i.e., enlarged prostate), and hypertension.

MedicalResearch.com: How doesJATENZO differ from other treatments for testosterone deficiency?

Response: The launch of JATENZO is an important step forward in testosterone replacement therapy. The only other oral testosterone replacement therapy product ever approved by the FDA is methyltestosterone (an alkylated androgen) that has been associated with serious liver toxicity and is rarely, if ever, used today. Because JATENZO is formulated as a lipophilic prodrug, it bypasses the first-pass hepatic metabolism. No liver toxicity-related events were observed in clinical studies of JATENZO including in patients who took JATENZO at higher doses than recommended in current product labeling for two (2) years.

We believe JATENZO addresses a long-standing need for a safe and effective oral testosterone replacement product that meets current day FDA safety and efficacy standards. JATENZO enters a market where the vast majority of hypogonadal men are treated with injectable or topical testosterone products. JATENZO avoids administration challenges seen with these non-oral treatments it presents no injection site pain, no transfer risk, no mess, no skin irritation and no surgical procedure. Therefore, we believe a significant number of hypogonadal men will prefer JATENZO as an alternative to other forms of testosterone therapy.

MedicalResearch.com: How are men tested to determine ifJATENZO therapy is appropriate for them?

Response: According to the American Urological Association and Endocrine Society clinical guidelines, diagnosis of hypogonadism is determined by both the identification of symptoms and/or signs consistent with hypogonadism and blood test measurement of low morning total serum testosterone concentration (defined as <300 ng/dL, on two separate days). Healthcare providers should assess each patient individually for the appropriateness of JATENZO to treat their clinical hypogonadism.

MedicalResearch.com: What else should readers take away from your report?

Response: Clinical hypogonadism can be more complex than most people realize and left untreated, can have a profound negative impact for the individual. Men with the symptoms of hypogonadism have a real medical need that deserves appropriate diagnosis and treatment.

Any disclosures?

Pleaseclick herefor full Prescribing Information, including BOXED WARNING on increases in blood pressure.

Citation:

CLARUS THERAPEUTICS ANNOUNCES COMMERCIAL LAUNCH AND AVAILABILITY OF JATENZO (TESTOSTERONE UNDECANOATE) CAPSULES, CIII FOR THE TREATMENT OF HYPOGONADISM

We respect your privacy and will never share your details.

Feb 19, 2020 @ 12:05 pm

The information on MedicalResearch.com is provided for educational purposes only, and is in no way intended to diagnose, cure, or treat any medical or other condition. Always seek the advice of your physician or other qualified health and ask your doctor any questions you may have regarding a medical condition. In addition to all other limitations and disclaimers in this agreement, service provider and its third party providers disclaim any liability or loss in connection with the content provided on this website.

See the original post:
Clarus Therapeutics Lauches JATENZO - Oral Testosterone Replacement Therapy - MedicalResearch.com

The world through the eyes of one photographer – CNN

(CNN) Whether traveling through the vast floodplains of Africa or Thailand's lush mangrove forests, when photographer Michael Poliza explores the world, he practices one principle: take nothing but pictures and leave nothing but footprints.

Over the last two decades, Poliza has traveled to almost 180 countries to capture vibrant and spirited photos focused on intimate moments of animals and the world's least-documented landscapes.

Capturing these special moments requires patience and an understanding of the erratic rhythms of the wilderness, but even the most seasoned wildlife photographers are not immune to nature's whims.

One day in 2011, while soaring over Purnululu National Park in Western Australia, Poliza and his helicopter pilot were too absorbed by the beauty of its beehive-like rock formations to notice they were headed straight towards a storm.

"Lightning was coming down left and right and up and down, and I had an open door in the back of the helicopter which you cannot close, so the rain was coming in. It was pitch black," said Poliza.

It was, he remembers, a "scary afternoon," but not a wasted one. As documented in his latest book "The World," the combination of imposing edifices and bottled lightning is among his most stunning photography to date.

These beehive-like rock formations found in Purnululu National Park, Western Australia, are known as the "bungle bungles."

Photo 2019 Michael Poliza. All rights reserved.

A man of reinvention

Poliza, now 62, wasn't always a photographer, starting as a child actor in his hometown of Hamburg, Germany, before founding multiple IT companies in the early internet boom. But in 1997, after more than a decade of transatlantic business trips, he sold his companies, packed up his things, and set out to explore the world.

He bought a 75-foot boat and embarked on a 1,009-day expedition around the world to raise environmental awareness, with photographers and filmmakers in tow. Together, they documented the journey, broadcasting photos via satellite and online as they explored remote areas of the world only reachable by ship.

Michael Poliza overlooking the Tekeze River in Central Tigray, Ethiopia.

Photo 2019 Michael Poliza. All rights reserved.

During the trip, while searching for great white sharks in Australia, Poliza learned to appreciate that nature cannot be forced. After five days without a sighting, a friend of Poliza's was getting impatient and offered money to their guide to speed up the search. "There was nothing he could do ... that was a very good lesson to understand that you cannot push nature to do anything."

A new beginning

When his journey came to an end, Poliza, then in his mid-40s, was confronted with what to do next. He sold his ship and stopped in Cape Town, South Africa, on the way to Madagascar. Besotted, Poliza canceled his trip to Madagascar, bought a house in Cape Town, and began exploring the continent.

He joined his friends on safaris, capturing photos of Africa's spectacular landscapes and vast range of animals. When some of his photographs began appearing in advertisements, his career started to take off. "I was just playing with my camera and trying to shoot things a bit different," said Poliza.

"To be honest, I didn't really have a plan ... I didn't wake up in the morning and say, 'I want to take a photo of wildlife or landscapes or a specific animal,' it just drifted into that."

Three lionesses photographed near Lake Ndutu on the eastern border of Serengeti National Park, Tanzania.

Photo 2019 Michael Poliza. All rights reserved.

One day, after returning from a safari, Poliza realized he had a problem. "I opened up my mail (and) I saw that my bank account wasn't smiling at me anymore. I realized I need to come up with a plan."

"I realized that I had a lot of images that hadn't been used ... so I thought maybe it would be fun to do a book that is a subjective look at the world," Poliza said. "I don't attempt to, and I don't pretend that my set of images covers the whole world. It's just my view of the world."

No matter where he is, Poliza says it's imperative for him to travel light, support the local economy, and live among the locals. He has formed an emotional attachment to the landscapes, the wildlife, and the people of every place he has traveled to. As the effects of global climate change worsen, he hopes his photos inspire others to commit to saving the planet.

"What I'm trying to do is focus on the beautiful side of the world, and I think there's still a lot of beauty there," he says. "I want people to ... create an emotional reaction with that area, with that place, with our planet, and are more willing to take responsibility that way."

Correction: An earlier version of this story said Michael Poliza's boat was 30 feet long. This has been updated to the correct length, 75 feet.

Read more from the original source:

The world through the eyes of one photographer - CNN

WITTI to Honor Top Women in Travel with Travel Awards Dinner, Gives Voice to Pearson Findings on Gender Mix in the C-Suite – Yahoo Finance

The second bi-annual award series for women, by women in travel and tourism

WASHINGTON, Feb. 20, 2020 (GLOBE NEWSWIRE) -- Women have long been the backbone of the travel and tourism industry. From front desk clerks to sales executives to the presidents of cruise lines, the industry depends on women. The Pearson study, renowned for its conclusive findings that 30% representation of women in the corporate C Suite results in 15% increase in profitability is one of the data points that Women in Travel and Tourism International (witti) founder Laura Mandala and her Advisory Board point to as evidence of need to shine a light on the industrys top women.

On February 20, the light will shine on the Women in Travel and Tourism International Awards honoring the talent, accomplishments and worthiness of what peers have voted The Top Women in Travel and Tourism.

Mandala, who also heads travel market research company Mandala Research, said, Go to any conference, hotel desk, or airline counter and youll find the women on the front lines of this industry. Yet they are strikingly underrepresented in the roles where the most critical decisions are made about running the businesses. They are nearly non-existent at the very highest levels of leadership. We started this awards recognition program to highlight the talent, accomplishments, and worthiness of so many women for continued advancement to those most coveted and impactful roles in travel and tourism management.

More than 80 women and organizations have been nominated for the witti awards. Winners will be presented at the Connect Travel Marketplace on February 20 in Kissimmee, Florida.

This will certainly be a very memorable year for the Top Women in Travel Awards presented in concert with the Connect Travel Marketplace and is honored to have Kelly Craighead, President and CEO of Cruise Lines International Association as its Master of Ceremonies.

It is an incredible honor to join WITTI in celebrating the contributions and leadership of women throughout the travel and tourism industry, said Craighead. I especially want to thank this years award-winners for continuing to chart the path for future generations of female leaders.

Shari Bailey, Vice President, Connect Travel who is one of the hosts of the event commented, Were thrilled that witti is honoring some of the brightest and most innovative women in the travel and tourism industry at this years Top Women in Travel Awards Dinner at Connect Travel Marketplace. The year's theme of "Powered by Passion" and with speakers like President Obama, wittis efforts to recognize trailblazers is very much in line with what were promoting."

The witti Top Women in Travel Awards, in their second bi-annual year, was the first, and remains the leading global awards for women of its kind.

The awards are part of wittis ongoing commitment to supporting, educating, and advocating for women who work in the travel industry. This years awards are awarded to the following women exemplifying excellence and achievement in these categories:

Outstanding Women in Destination Management and Marketing

Outstanding Women in Hospitality

Outstanding Woman in Shopping Tourism

Outstanding Women in Travel and Transportation

Rising Stars in Travel and Tourism

Outstanding Woman in Tourism Marketing

Outstanding Woman in Travel Blogging

Outstanding Woman in Travel/Tourism Media

Outstanding Woman in Travel Research

Outstanding Mentor in Travel and Tourism

Lifetime Achievement in Travel and Tourism Award

Dinner sponsors include

The awards were judged by Barbra Anderson, Founding Partner, Destination Better, Anne Madison, CEO, 357 Communications, LLC, Davonne Reaves, President, The Vonne Group Beth Offenbacker, Executive/Leadership and Career Coach, Consultant, and Strategic Advisor with Waterford, Inc.

About Witti

Wittismission is to enhance the success of women in the travel and tourism industry through peer-to-peer networking, advocacy, awards recognition, and professional development opportunities. The specific benefits witti offers its members include: networking through meetings, conferences and social networking platforms; recognition through the Top Women in Travel Awards; lead sharing; education and professional development; advocacy in promoting the visibility of women in the senior ranks of the travel industry; research on the status of women in industry. For more information about Witti, contact Laura@MandalaResearch.com, visit womenintravelandtourism.com and follow @witti.org on Twitter.

Story continues

ABOUT CONNECT TRAVEL Connect Travel creates efficient and effective environmentsto expedite the sales process by connecting tourism professionals with the products, services, people and ideas that allow them to thrive in a rapidly evolving and highly competitive global marketplace. For more information, visit ConnectTravel.com.

Media contact:Paul WilkeUpright Position CommunicationsTel: +1-415-881-7995Email:paul@uprightcomms.com

Read the original:

WITTI to Honor Top Women in Travel with Travel Awards Dinner, Gives Voice to Pearson Findings on Gender Mix in the C-Suite - Yahoo Finance

What the world’s most expensive Irish whiskey tastes like – CNN

London (CNN) A rare beast has been asleep in the Irish countryside for close to half a century.

When the Old Midleton Distillery in County Cork closed its doors in 1975, after 150 years in business, several casks of trial whiskey innovations disappeared with it. They rested deep within their barrels -- until now.

On Tuesday night, a gathering of whiskey enthusiasts met in London's Old Sessions House to toast the launch of Midleton Very Rare Silent Distillery Collection, Ireland's oldest ever whiskey collection.

Its first release is a 45-year-old peated single malt, created in 1974 by master distiller emeritus Max Crockett and guarded at the abandoned distillery for three generations since.

Presented in a handblown Waterford Crystal decanter and displayed in a wooden cabinet made from reclaimed whiskey vats, there are just 48 bottles in the world. The price tag for this rare wonder is $40,000.

CNN Travel was there to have a taste.

'Unicorn whiskey'

Over 45 years of maturation, the whiskey has lost 87% of its volume, making the cask's cargo all the more precious.

As master of ceremonies, he stands as 25-milliliter glasses of the amber-hued elixir are distributed around the two tables of eagerly waiting diners. Then, with a flourish, a switch is flicked so the glasses are lit from below and the whiskey gleams.

We grasp the stems and breathe deeply, absorbing a world of rich dark spices and antique oak.

"There's a lovely earthy note of freshly cut peat and I think of leather," explains Nation, guiding us on our sance with this most rare of spirits.

"And that's given a twist by some citrus notes, particularly by what I would describe as grapefruit. The contribution of the sherry wine-seasoned cask is giving you some hints of ripe honeydew melon, but particularly red berries as well."

Our noses filled, it's time to part our lips.

Courtesy Midleton Very Rare

'Instantly rich'

Tasting a fine whiskey is like skimming stones across a lake.

The first sip breaks the surface, then the ripples of flavor spread out, but there are unexplored depths still to savor.

The Midleton Very Rare whiskey is a cask-strength 51.2% alcohol.

We taste it neat first, in order to appreciate the smoothness of the distillate and full flavor contribution at its original strength.

Nation pronounces it, "Instantly rich. The initial peppery spices slowly begin to soften as the contribution of the malted barley comes to the fore.

"We're getting lovely sweetness from what I would describe as liquorice, barley sugar and even some hints of honey. But that sweetness is given a little edge by a touch of sherbert. All of this is happening on a stern foundation of toasted oak."

The finish is slow to fade, and we're still savoring the spices and malted barley as we add a drop of water to our glasses.

The act of dilution, says Nation, "mutes the alcohol a bit and allows the other flavors to come more to the fore. It's always interesting to see how the whiskey evolves."

When a complex, balanced whiskey such as this one sits in the glass and heats up to room temperature, different flavor profiles and taste profiles are revealed on each fresh sip.

"It's bringing you on a journey all through the process," says Nation.

'Liquid history'

Carol Quinn, archivist at Irish Distillers, tells CNN Travel, "A lot of people use the phrase 'liquid history,' but I think for myself, this is the first time that I've genuinely tasted liquid history. To see something that's been silenced for so long is extraordinary."

One of the most remarkable elements of this first release, says Quinn, is that it's a peated malt. "Traditionally Irish whiskey is a mixture of malted and unmalted barley," she explains. However, this one is all malt and, on top of this, "It's peated, which is extremely unusual."

This whiskey is the first of six releases, with one release annually until the year 2025, ranging in age from 45 to 50 years old, all from the Old Midleton Distillery. The last release will coincide with the Old Midleton Distillery's 200th birthday.

Courtesy Midleton Very Rare

There will be 44 bottles of this first release for sale in the US, the UK, France and Ireland, while two bottles will be sold via ballot system through The 1825 Room, the Midleton Very Rare online members' program.

For those of more modest means, however, Midleton Very Rare has some more affordable mass-produced whiskeys, ranging in price from 180 to 310 euros.

"His favorite of the whiskeys, he says, is Barry Crocket Legacy, because of its "nice oily mouth feel with some white pepper spice. It's got fresh mandarin and orange notes that burst forward."

Enjoying her whiskey post-dinner at Old Sessions House, Quinn tells CNN Travel that it's her first time trying the Silent Distillery Collection and she traveled from Ireland to do it.

"I was dying to get here," she says. "This is possibly my only chance to taste it."

Tamara Hardingham-Gill contributed to this report.

Read the original post:

What the world's most expensive Irish whiskey tastes like - CNN

Travel Green: Discover Some Of The Worlds Best Eco-Friendly Hotels – Forbes

Salinda Resort, Vietnam

Low-impact travel and luxury can coexist thanks to an ever-expanding list of properties striving to respect their guests desire for environmentally friendly accommodation. Heres a look at some of the worlds top sustainable hotels.

Camp Glenorchy

Camp Glenorchy, New Zealand

Listed as one of TIME Magazines Worlds Greatest Places, Camp Glenorchytakes sustainability seriously. Its New Zealands first net-zero energy accommodation. The property was built according to the Living Building Challenge, which is said to represent the most rigorous sustainability standards on the planet. The property uses 50% less energy and water than comparable resorts and also relies on earth-friendly amenities like a solar garden, smart lighting, solar panels and an advanced onsite energy and water management system. Adding to Camp Glenorchysenvironmental allure is its incredible natural surroundings between the Humboldt and Richardson Mountain range.

Pikaia Lodge

Pikaia Lodge, Ecuador

Explore the iconic natural beauty of the Galapagos Islands from eco-luxurious Pikaia Lodge. The carbon-neutral property usesalternative energy resources and has anoutstanding social responsibility program. Recyclable, eco-friendly building materials were sourced for its construction (bathroom tiles, for instance, are made from lava stone taken from local sites that were approved by the National Park Service). Most of the furniture and decor were made from sustainable, agro-cultivated teak and bamboo wood from Ecuador. The property also uses only biodegradable cleaning products and hotel water is heated through the use of solar panels.

Discovery Rottnest Island

Discovery Rottnest Island, Australia

Rottnest Island, just off the coast of Perth, is home to the quokka, an adorable creature that looks like a miniature wallaby. Protecting wildlife and maintaining a low environmental impact are key concerns for Rottnest, which carefully limits development. Discovery Rottnest Island is the first hotel to be built on the island in over 30 years and the property created a Wildlife Management Plan to limit the impact on wildlife. The hotel offers a one-of-a-kind, low-impact glamping experience on gorgeous Pinkys Beach. The elegant eco-tents are made from sustainable materials that rely on air-flow rather than air conditioning for ventilation. The property also harvests rainwater for reuse. To exist in harmony with its surroundings and ensure fauna like the quokkas can roam freely, there are no fences or boundries around the hotel.

Fogo Island Inn

Fogo Island Inn, Canada

Set on one of Canadas most striking islands, the Inn is a community-friendly initiative and 100% of the operating surpluses are reinvested into the community to help the people of Fogo Island prosper. Additionally, the architecture and operational systems have been designed to meet the highest levels of energy efficiency and conservation within a luxury setting. Collected rainwater is filtered for use in toilets, laundry and appliances and solar panels supply hot water. Local suppliers for food and materials are used wherever possible, and the furniture is handcrafted and produced at the Inns Woodshop, which employs local craftspeople. Even the incredible quilts in each guest room are made by Island quilters.

Salinda Resort

Salinda Resort, Vietnam

Luxe Salinda Resort on Phu Quoc island lauds sustainability as one of its core values. In 2019, the resort became WWF-Vietnams official partner for plastic reduction management on Phu Quoc, with the goal of eradicating single-use plastic. In honor of this partnership, the hotel organizes a beach clean day once a month where staff and guests join to remove garbage from the beaches and surrounding neighborhoods. The hotel also prioritizes sustainable design in both its structures and surrounding landscape with a focus on biodegradable and renewable building materials. The property has also replaced plastic room keys with wood, shampoo containers with ceramic and uses LED lighting.

Aquila Eco Lodges

Aquila Eco Lodges, Australia

This property, located in spectacular Grampians National Park, showcases environmentally-responsible living at its finest. Accredited by Eco Tourism Australia, Aquila is a verdant retreat for families and travelers of all ages. The property generates power and deals with all waste on site. Additionally, the resort has a rain water collection program, as well as a worm-based composting system to return nutrients back to the environment. Inside, guests will find low-wattage appliances and lighting, non-toxic paint, natural oil finishes and flushing compost toilet systems all designed to ensure an ozone-friendly experience.

Soneva Fushi

Soneva Fushi, Maldives

Soneva Fushi is an eco-pioneer among resorts in the Maldives. It recycles 90% of its waste on-site at its own Eco Centro recycling plant as part of its "Waste-to-Wealth" program, which transforms waste into new products. Food waste from the resort's restaurants is composted to create nutrient-rich soil for the vegetable gardens. In 2017, the property was the first in the Maldives to recycle plastic on site. Soneva is also working with local government to open recycling facilities and introduce the resort's "Waste-to-Wealth" concept to three neighboring islands, which would help support local communities to reduce plastic consumption. The program also aims to educate local kids about waste and respect for the ocean, as well as teach locals to swim and surf.

Blue Waters Resort & Spa

Blue Waters Resort & Spa, Antigua

With a goal to go completely plastic free in the near future, Blue Waters Resort & Spa is at the forefront of the sustainability movement among luxury hotels on Antigua. The property implemented plastic-reducing initiatives by installing refillable water stations throughout the resort and introduced complimentary BPA-free water bottles for guests.Other sustainability measures include growing fresh produce on-site, recycling and providing suitable food waste to local farmers for animal feed. The hotels most recent eco-effort is the launch of its proprietary bath amenity brand, Neem Avenue, which will eliminate approximately 55,000 single-use miniatures within a year.

Petit St Vincent

Petit St Vincent, St. Vincent & The Grenadines

This idyllic, eco-aware hotel, which is a member of Small Luxury Hotels of the World, goes out of its way to show that sustainability and luxury are not mutually exclusive. The property uses a state-of-the-art reverse osmosis desalination plant to processes ocean water to supply fresh drinking water. The hotel also bottles its own drinking water using reusable glass bottles, to prevent the need to import bottled water. Much of the produce served at the resorts restaurants are harvested from its local organic garden. Recently, the property started a coral restoration and reef monitoring project with help from the Philip Stephenson Foundation and CLEAR Caribbean.

Capella Ubud

Capella Ubud, Bali

Hidden in Ubuds lush rainforest, hugged by rice paddy fields and the Wos River, lies this incredible tented camp sanctuary. To preserve the pristine surroundings, no tree was cut during the construction of the resort. The property also has a no single-use plastic policy and offers the local surrounding villages an educational program that focuses on a sustainable approach to waste management and eliminating plastic. Capella Ubud also has a variety of sustainability focused scholarships programs for the local villages youths.

Heckfield Place

Heckfield Place, England

This Georgian Manor estate, nestled in the heart of Hampshires Jane Austen country, is set on 400 acres of sustainable farmland. The estates farm abides by bio-dynamic principles, and its lush gardens and orchards form the base of celebrated chef Skye Gyngells extraordinary cuisine. The farm also supports pigs, sheep and chickens and relies on its own biomass energy center to power the hotels water and central heating. An aerobic digester processes all recyclable waste to supply compost to enrich the garden soil and it also provides pellets for the biomass energy center.

See the original post here:

Travel Green: Discover Some Of The Worlds Best Eco-Friendly Hotels - Forbes

Miami Beach Debuts "Why I Love Miami Beach" Social Video Series to Show Why the Destination is Like No Other Place in the World – PRNewswire

"Miami Beach is a world-class destination that notable personalities and local celebrities call home thanks to our natural beauty, cultural community, selection of restaurants, activities, museums and more," notes Steve Adkins, Chair, the Miami Beach Visitor and Convention Authority (MBVCA). "There are many reasons why we all love Miami Beach and look forward to providing future visitors with an insider's look at what makes Miami Beach so special."

Created to show the many sides of Miami Beach, the "Why I Love Miami Beach" social video series is the perfect way for vacationers to take a deeper look into the people that make Miami Beach a must-visit destination. In addition to the new social video series, visitors can find the latest news and details about happenings on Miami Beach by downloading the Miami Beach app at http://www.miamibeachapi.com/ and following @ExperienceMiamiBeachon Facebook, Instagram and@EMiamiBeachonTwitter to learn more.

"The best way to truly learn about a destination is to experience it through the local lens of those who are living the Miami Beach dream daily. The "Why I Love Miami Beach" social video series gives an authentic look at a number of different reasons why we continue to be a global hot spot for visitors and residents," adds Grisette Marcos, Executive Director, MBVCA. "Our goal is to encourage an open discussion with those who have been to Miami Beach and those who are considering a trip to experience our seven miles of white sands, active art scene, emerging and established chefs and selection of offerings that suit any traveler's needs."

The new "Why I Love Miami Beach" social videos series features Miami Beach Locals including Steve Sawitz, Owner of Joe's Stone Crab, Ria Michelle, Lifestyle Blogger and Content Creator, Erika Lorenzo, the woman behind Chewithme, Benjamin Goldman, Chef De Cuisine of Planta South Beach and Carla Nuez, Fashion Blogger and owner and founder of clothing brand CN Wears.

To view the "Why I Love Miami Beach" social videos series, follow @ExperienceMiamiBeachon Facebook, Instagram and @EMiamiBeachonTwitter. New videos will be posted each week on Thursday.

ABOUT MIAMI BEACH

Miami Beach is an award-winning destination, recently awarded silver in the 2020 edition of the Travvy Awards, presented by travAlliancemedia, in the categories of 'Best Tourism Board U.S & Canada,' 'Best LGBQT Destination' and 'Best Luxury Destination U.S & Canada." This adds to the wins in the 2019, 2018 and 2017 edition of the Travvy Awards in categories including 'Best Honeymoon Destination, U.S. & Canada', 'Best Tourism Board U.S. & Canada', and 'Best LGBTQ Destination'. Also recently named 2019 and 2018 North America's Leading Tourist Board by the World Travel Awards, and a winner in the 2018 Magellan Awards by Travel Weekly in the categories of "Best Overall Honeymoon Destination in the United States and Canada", "Best Overall Beach Destination in the United States and Canada", and "Best Overall Spa Destination in the United States and Canada" respectively. Miami Beach is a favorite destination among travelers worldwide. Renowned for its unparalleled culinary offerings, extravagant nightlife, rich culture, luxe shopping and plush hotels, Miami Beach is home to unique museums, the New World Symphony, Miami City Ballet, Miami Beach Convention Center, international festivals and art exhibitions, boat and auto shows, over 187 boutique and resort hotels and 12 public parks; it is no wonder the beautifully diverse city is one of the world's most popular vacation destinations. Boasting seven miles of breathtaking beaches, Miami Beach is easily accessible from the Port of Miami and Miami International Airport. The City of Miami Beach has been named one of the top cities worldwide for 'walkability' and is equally easy to navigate by bike or boat. Known for its year-round sunny skies, the vibrant destination has been ranked by TripAdvisor as a Top Winter Sun Vacation Rental Getaway Destination, Top Romantic Destination, Top 25 Beaches in the World and Top 25 Destinations in the U.S. Miami Beach is like no other place in the world! In 2019, the MBVCA introduced new handles on Instagram and Facebook @ExperienceMiamiBeach and on Twitter @EMiamiBeach to provide visitors with real-time information and recommendations.

SOURCE Miami Beach Visitor and Convention Authority

Continue reading here:

Miami Beach Debuts "Why I Love Miami Beach" Social Video Series to Show Why the Destination is Like No Other Place in the World - PRNewswire

Industrial Tourism Market Global Insights and Trends 2020 to 2026 – Nyse Nasdaq Live

Global Industrial Tourism Market Size, Status and Forecast 2020-2026

The report titledIndustrial Tourism Markethas recently added byMarketInsightsReportsto get a stronger and effective business outlook. It provides an in-depth analysis of different attributes of industries such as trends, policies, and clients operating in several regions. The qualitative and quantitative analysis techniques have been used by analysts to provide accurate and applicable data to the readers, business owners and industry experts.

Get Free Sample Copy of this Report:

https://www.marketinsightsreports.com/reports/07011327021/global-industrial-tourism-market-size-status-and-forecast-2019-2025/inquiry?source=nysenewstimes&Mode=07

Top Leading Companies of Global Industrial Tourism Market are: Expedia Group, Priceline Group, China Travel, China CYTS Tours Holding, American Express Global Business Travel, Carlson Wagonlit Travel, BCD Travel, HRG North America, Travel Leaders Group, Fareportal/Travelong, AAA Travel, Corporate Travel Management, Travel and Transport, Altour, Direct Travel, World Travel Inc., Omega World Travel, Frosch, JTB Americas Group, Ovation Travel Group and others.

Global Industrial Tourism Market Split by Product Type and Applications:

This report segments the global Industrial Tourism market on the basis of Types are:

Industrial heritage tourism

Visits to companies which open their doors to visitors to highlight their production methods

Scientific tourism

On the basis of Application, the Global Industrial Tourism market is segmented into:

Below 20 Years

20-30 Years

30-40 Years

40-50 Years

Above 50 Years

Industrial Tourism Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report. The report contains basic, secondary and advanced information pertaining to the Industrial Tourism Market global status and trend, market size, share, growth, trends analysis, segment and forecasts from 2020-2026.

Explore Full Report With Detailed TOC Here:

https://www.marketinsightsreports.com/reports/07011327021/global-industrial-tourism-market-size-status-and-forecast-2019-2025?source=nysenewstimes&Mode=07

Highlights of the Industrial Tourism Market Report:

Detailed overview of Industrial Tourism Market Changing Industrial Tourism market dynamics of the industry In-depth market segmentation by Type, Application etc. Historical, current and projected Industrial Tourism market size in terms of volume and value Recent industry trends and developments Competitive landscape of Industrial Tourism Market Strategies of key players and product offerings Potential and niche segments/regions exhibiting promising growth.

The research includes historic data from 2015 to 2020 and forecasts until 2026 which makes the report an invaluable resource for industry executives, marketing, sales and product managers, consultants, analysts and stakeholders looking for key industry data in readily accessible documents with clearly presented tables and graphs.

Finally, Industrial Tourism Market report is the believable source for gaining the market research that will exponentially accelerate your business. The report gives the principle locale, economic situations with the item value, benefit, limit, generation, supply, request and market development rate and figure and so on. Industrial Tourism industry report additionally Present new task SWOT examination, speculation attainability investigation, and venture return investigation.

About Us:

MarketInsightsReports provides syndicated market research on industry verticals including Healthcare, Information and Communication Technology (ICT), Technology and Media, Chemicals, Materials, Energy, Heavy Industry, etc. MarketInsightsReports provides global and regional market intelligence coverage, a 360-degree market view which includes statistical forecasts, competitive landscape, detailed segmentation, key trends, and strategic recommendations.

Contact Us:

Irfan Tamboli (Head of Sales) Market Insights Reports

Phone: + 1704 266 3234 | +91-750-707-8687

[emailprotected] | [emailprotected]

The rest is here:

Industrial Tourism Market Global Insights and Trends 2020 to 2026 - Nyse Nasdaq Live