Millennial Says He’s Spending $1 Billion to Bail Out the Crypto Industry – Futurism

"We want to do what we can to stem contagion..."Showboat

It's been a banner month for billionaire crypto whisperer Sam Bankman-Fried, and now he's hinting at some provocativenext moves.

In an interview withThe Wall Street Journal, the CEO and founder of the cryptocurrency exchange FTXhe intends to spend a full $1 billion bailing out the ailing crypto industry. Whether the bet will pay off for the 30-year-old, who's worth $11.9 billion now and was worth more than double that last year, is anyone's guess. But after providing a $400 million loan to BlockFi and buying the entire exchange Liquid after it was hit by a huge hack, he's certainly putting his money where his mouth is.

"We want to do what we can to stem contagion, and sometimes thats going to mean that we try to help out in cases where its not enough," Bankman-Fried told the newspaper. "If that never happened, Id feel that we were being way too conservative."

Bankman-Fried, who's garnered headlines for everything from becoming a political megadonor to apparently being uninsured, told the paper that although he believes the worst of the industry's ills have been "flushed out of the system," he's betting a billion dollars that he can save it from further self-harm.

FTX executive Ramnik Arora told the WSJ, that the company fielded calls from more than two dozen doomed crypto firms seeking Bankman-Fried's generosity. Among the callers, Arora claims, was the now-infamous Celsius exchange, whose withdrawal suspension is believed to have caused much of the whole domino effect crypto crash in the first place.

And it doesn't end there. Bankman-Fried told the paper that FTX keeps "a few billion" in US dollars to cut deals, though he wasn't specific about what further bailouts he's planning.

Like in traditional finance, confidence is everything in the crypto world. If this 30-year-old billionaire's sangfroid is to be believed, the industry only needs a billion dollars worth of help to bounce back.

READ MORE:The 30-Year-Old Spending $1 Billion to Save Crypto [The Wall Street Journal]

See the original post here:

Millennial Says He's Spending $1 Billion to Bail Out the Crypto Industry - Futurism

Hurry Up and Watch These Videos Tesla Wants Removed From the Internet – Futurism

Tesla is calling new videos that show its vehicles mowing down child mannequins while on Autopilot defamatory and has sent a cease-and-desist letter to the videos' creators, The Washington Post reports.

In other words, has the company never heard of the Streisand effect?

It's a messy back and forth that's bound to draw even more attention to Tesla'sFull Self-Driving (FSD) feature, a controversial $12,000 add-on that allows Tesla vehicles to take care of changing lanes and navigate complex city intersections, among other capabilities though it still frequently makes serious errors and requires drivers to be ready to take over at any moment, making its name an apparent misnomer.

The company has started rolling out a beta software of the feature for its customers to test on public roads, a decision that's already proven highly controversial.

The mannequin videos were put together by the Dawn Project, a campaign founded by tech mogul and billionaire Dan O'Dowd to stop "Elon Musks reckless deployment of unsafe Full Self-Driving cars on our roads," according to its official website.

O'Dowd, who owns an airplane and car operating systems company and ran for US Senate this year, broadcasted ads, including several that show Tesla vehicles striking child mannequins with the car company's FSD feature allegedly turned on.

The billionaire told WaPothat "we have been busy hooking up and putting computers in charge of the things that millions of peoples lives depend on: self-driving cars is one of those."

Now, in light of the case-and-desist letter, O'Dowd didn't mince words.

"This letter is so pathetic in terms of whining: Mr. Free Speech Absolutist, just a crybaby hiding behind his lawyers," he told WaPo, referring to the fact that Musk has repeatedly painted himself as a "free speech absolutist," despite his actions often suggesting otherwise.

In the letter, the Musk-led company argued that O'Dowd's videos are misrepresenting its driver-assistance software.

The company stands firmly behind its belief that both Autopilot and FSD make streets safer. Musk has gone as far as to say that driving on Autopilot is "on balance... unequivocally safer."

Some of Tesla's fans were equally outraged at the videos and even chose to place their own offspring in front of moving Teslas with FSD turned on, sparking outrage. YouTube, for instance, took down the videos to ensure others weren't inspired to try it for themselves.

According to WaPo, Tesla referenced a report by Electrek in its letter, which stated that FSD was "never engaged" during Dawn Project's tests despite the Dawn Project claiming otherwise.

"The purported tests misuse and misrepresent the capabilities of Teslas technology, and disregard widely recognized testing performed by independent agencies as well as the experiences shared by our customers," Tesla deputy general counsel Dinna Eskin wrote in the letter, as quoted by WaPo.

The company even went as far as arguing that the videos "put consumers at risk."

The letter marks an escalation in Tesla's efforts to manage the public's expectations of its driver-assistance software. But, as countless videos have demonstrated, there's at least some cause for concern, despite the company's best efforts to vet those who have early access.

The fact remains: Tesla is testing its unfinished driver assistance feature on public roads, whether other drivers agree with that decision or not.

Trying to silence its critics is only bound to draw even more attention to the issue and that's clearly not in Tesla's best interest.

READ MORE: Tesla demands removal of video of cars hitting child-size mannequins [The Washington Post]

More on FSD: California Wants Tesla to Stop Calling Half-Finished System "Full Self-Driving"

Read more from the original source:

Hurry Up and Watch These Videos Tesla Wants Removed From the Internet - Futurism

Raising One Kid Now Costs a Third of a Million Dollars – Futurism

"A lot of people are going to think twice before they have either a first child or a subsequent child because everything is costing more."How High

Raising a kid has never been easy. And with inflation, its probably never been this expensive either, as a new estimate from the Brookings Institution, published last week in The Wall Street Journal, puts the average cost of raising a child through high school at an astonishing $310,605.

Specifically, the estimate calculates the average cost for a married, middle income couple with two children, raising their younger child born in 2015 a pretty widely applicable scenario.

Thats more than a $70,000 increase from a USDA estimate of childrearing costs from just five years ago in 2017, which put the number at an already intimidating $233,610.

"A lot of people are going to think twice before they have either a first child or a subsequent child because everything is costing more," Brookings senior fellow Isabel Sawhill told the WSJ.

The Brookings analysis used the earlier USDA estimate as a baseline, which accounted for expenses ranging from basic amenities like food, clothing, and housing, to the stuff needed for typical kids activities, like sports equipment, and much, much more.

The main driver of the drastic cost increase is, of course, historically high inflation a 40 year high and that should come as no surprise to anyone that does their own grocery shopping or owns a car.

The inflation rate peaked at a whopping 9.1 per cent in June, and then "eased" down to 8.5 per cent in July. Where its headed next is anyones guess, but Sawhill thinks the inflation rate will be coming down thanks to the Fed "stepping on the brakes." To her, the uncertainty lies in just how hard and how fast that decline will be.

Thats great and all, but the fact of the matter is that inflation has been outpacing wages for some time now. Since July 2021, average weekly wages have dropped 3.5 per cent when adjusted for inflation, according to the Bureau of Labor Statistics.

Something as fundamental as raising a child should never cost so much, especially when parents are struggling to make ends meet.

More on inflation: Oh Great, Gas AND Solar Prices Are Going Up

Read more here:

Raising One Kid Now Costs a Third of a Million Dollars - Futurism

James Webb Spots "Clear Evidence" of CO2 in the Atmosphere of an Exoplanet – Futurism

Yet another spectacular discovery.CO2 Be

NASA's James Webb Space Telescope has made the first "clear detection" of carbon dioxide in the atmosphere of a planet beyond our solar system, according to NASA.

Unfortunately, this particular exoplanet isn't likely to harbor life as we know it. The gas was discovered in the atmosphere of WASP-39 b, a hot gas giant, which is a blistering 1,600 degrees Fahrenheit.

But it is a potentially significant discovery that could give us invaluable insight into the evolution of exoplanets, and possibly spot signs of the gas in other rocky Earth-like planets as well.And, at the end of the day, it's just another cool finding from the James Webb.

The exoplanet has a diameter roughly 1.3 times greater than Jupiter, according to NASA, and orbits its star extremely closely every four Earth-days, some 700 light-years away.

While scientists have been able to confirm the presence of other substances including water vaporand sodium in other planets' atmospheres, the incredible sensitivity of Webb's instruments has allowed astronomers to add carbon dioxide to the list.

The space observatory made the discovery by measuring the exoplanet's brightness across a wide spectrum of wavelengths using the observatory's Near-Infrared Spectrograph (NIRSpec).

"As soon as the data appeared on my screen, the whopping carbon dioxide feature grabbed me," said Zafar Rustamkulov, Johns Hopkins University graduate student and James Webb scientist, in a statement.

The discovery could lead to even more exciting discoveries like it.

"Detecting such a clear signal of carbon dioxide on WASP-39 b bodes well for the detection of atmospheres on smaller, terrestrial-sized planets," said Natalie Batalha, team lead and researcher at the University of California at Santa Cruz.

Astronomers can now use the data to learn how exoplanets like WASP-39 b evolved over time.

"By measuring this carbon dioxide feature, we can determine how much solid versus how much gaseous material was used to form this gas giant planet," said team member Mike Line from Arizona State University, in the statement.

In only a short period of time, in other words, NASA's revolutionary space observatory is already turning the world of astronomy on its head.

"In the coming decade, JWST will make this measurement for a variety of planets, providing insight into the details of how planets form and the uniqueness of our own solar system," Line added.

READ MORE: NASAs Webb Detects Carbon Dioxide in Exoplanet Atmosphere [NASA]

More on exoplanets: Researchers Want to Use the Sun As a Giant Telescope to Look for Aliens

Read more from the original source:

James Webb Spots "Clear Evidence" of CO2 in the Atmosphere of an Exoplanet - Futurism

Scientists Discover That Dogs Cry Tears of Joy When Reunited With Owners – Futurism

Here come the waterworks. Cry More

Dogs literally cry tears of joy when they see their owners after they've been away, scientists have found in the first study of its kind that is also totally going to make us cry, too.

Published in theCurrent Biology journal, this study by Japanese researchers found not only that dogs shed happy tears,but also that the love hormone oxytocin the same one that causes humans to feel emotional bonds with each other and with animals may be underlying that mechanism.

Researcher and paper co-writer Takefumi Kikusui of Azabu University in Japan said in a press release about the study that he first began to wonder about oxytocin tears in dogs when his standard poodle gave birth to puppies about six years ago. He noticed then that his dog had tears in her eyes as she nursed the puppies, and has been fascinated by the topic ever since.

The first part of the study, as the press statement notes, saw the Azabu scientists measuring the pups' tear volume before and after reuniting with their owners, and before and after reuniting with a random human they didn't know. The dogs' tear volume did increase when they saw their people, while seeing the unfamiliar person didn't produce the same effect.

Next, the researchers added an oxytocin solution to the dogs' eyes and they found that the tear volume was even higher when the solution was added after they were reunited with their owners. This suggested to the scientists that oxytocin may be associated with the release of tears, as it is when humans shed emotional tears.

"We had never heard of the discovery that animals shed tears in joyful situations, such as reuniting with their owners," Kikusui said, "and we were all excited that this would be a world first!"

So far, nobody has studied yet whether dogs shed tears when they're sad as well but once they do, those findings will probably unleash the waterworks in us, too.

READ MORE:Increase of tear volume in dogs after reunion with owners is mediated by oxytocin [Current Biology]

More animal love:Ambitious Researchers Want to Use AI to Talk To All Animals

Here is the original post:

Scientists Discover That Dogs Cry Tears of Joy When Reunited With Owners - Futurism

Startup Selling Luxurious Homes That Poke Out of the Ocean on Stalks – Futurism

"Every SeaPod that goes in the water gets us one step closer to restoring a marine ecosystem."SeaPods

Babe, wake up... ocean-borne, Q-tip-like smart homes just dropped, and they admittedly look pretty cool.

As USA Today reports, a Panama-based company called Ocean Builders has unveiled the SeaPod, a rounded, two-person, three-and-a-half-story luxury home that sprouts out of the ocean by way of long steel stalks. The stark white rendered interiors are decidedly modern, and each pod offers a breathtaking 360-degree view of the ocean. In the company's vision, drones will serve as life guards and deliver things like groceries and medicine, which seems convenient.

Sold yet? Good news: if you've got $295,000 to $1.5 million on hand, you can order one starting as soon as this September but it'll take a few years before you actually get to live in it, and whether the company can actually deliver on the futuristic homes remains to be seen.

On its website, Ocean Builders claims that the SeaPod, as well as its land-dwelling sibling, the GreenPod, is the world's first "eco-restorative home" essentially, the argument is that because a SeaPod would provide shade from the harsh Sun as well as a structure for sea life like coral and barnacles to attach to, building the pods will actually create a number of mini-habitats for a wide range of marine creatures.

"Every SeaPod that goes in the water," reads the company's site, "gets us one step closer to restoring a marine ecosystem."

Speaking of the environment: if you're worried about, you know, garbage, an autonomous vessel will apparently collect recycling, garbage, and other debris, while other, ahem, waste, will allegedly be incinerated into non-toxic ash, as per USA Today's report.

According to USA Today, Ocean Builders says that the first 100 pods will either be in production or delivered by the end of 2023, and the company is hoping to launch a rollout of 1,000 more structures over the following year.

"We are planting the SeaPod seed here in Panama," the company's CEO said in a statement, "but our eventual goal is to have SeaPod homes in every corner of the ocean, all around the world."

If you love the ocean, have just yourself or one other person to house, and have enough cash to luxuriously escape the pending climate catastrophe, the SeaPod could be a lovely fit for you. Although, gotta say all the incredible promises about these things might sound a bit too good to be true.

READ MORE: Fleets of futuristic homes that float above the sea are 'revolutionizing' aquatic living [USA Today]

More on future housing: This Futuristic Space Condo Is Designed to Squish into Spacex's Starship

See the original post here:

Startup Selling Luxurious Homes That Poke Out of the Ocean on Stalks - Futurism

Metaverse: The Gap Between Reality and Futurism – Connect CRE

Googling the term real estate financing metaverse will provide approximately 8.8 million hits. The results are a mishmash of companies that provide financing for metaverse real estate deals, as well as articles ranging from skepticism (Investing in Metaverse Real Estate: Mind the Gap Between Recognized and Realized Potential) to enthusiasm (The Coming Boom in Metaverse Lending for Banks). Previous Weekender articles have also chimed in on the topic, most recently with Buying and Financing LandIn the Metaverse.

But is the industry really at the point in which virtual real estate and financing deals can or even should take place? Not just yet.

In a recent Walker Webcast, Walker & Dunlop chairman and CEO Willy Walker acknowledged that the metaverse is gaining traction. However, Ive been asked whether Walker & Dunlop is thinking about financing real estate in the metaverse, Walker commented. I will be so long gone when Walker & Dunlop starts financing real estate in the metaverse.

According to L.D. Salmanson, CEO of New York Citys real estate data and insight firm Cherre, in the short term two or three years, (metaverse) is a buzzword that provides zero value to real estate owners and operators. He told Connect CRE that at this point, scammers will use it to raise money for nonsense, and visionaries will use it to raise money for things that are too early.

One reason is because of the current state of hardware and software. Salmanson explained that Apple, Meta and Google have their own hardware and software ecosystems and their own virtual reality and augmented reality environments. Using video games as an example, Salmanson said that shared universes are possible across different hardware types if and only if the software developer decides to make this universe accessible from multiple hardware environment.

The metaverse, as it currently stands, isnt a whole lot different. Even if virtual locations are accessible from different platforms, software vendors build their own, non-converging environments. I cant really picture one metaverse, Salmanson said. Rather, I see multiple, siloed hardware and software environments.

Additional challenges include current battery technology that is far behind what we need for this reality to exist, Salmanson said. The costs are also high, and current central processing units (CPUs) and graphic processing units (GPUs) arent advanced enough to support a meta world. The power consumption for these devices is astronomical, Salmanson added.

All told, the idea of buying and financing anything, let alone real estate, in the metaverse is a nice fantasy, but far from applicable right now. As operators and investors, we need to be grounded in reality, Salmanson said. We dont have the luxury of futurism for futurisms sake. Thats for science fiction writers to delight us, not for the immediate reality.

But technology isnt static, and its likely the metaverse wont stay static, either. Salmanson said that as hardware capabilities advance and AR and VR moves beyond the cartoon stage of quality, this could begin to provide rich experiences that can start replacing or enriching every day experiences, he said. But penetration here will be slow.

More:

Metaverse: The Gap Between Reality and Futurism - Connect CRE

Astronomers Just Watched a Neutron Star Hulk Smash Another Star – Futurism

It triggered one of the most powerful explosions in the universe.Star Smasher

Scientists just caught the tail-end of a neutron star smashing into its stellar neighbor.

The resulting explosive jet was so powerful,it blasted a gamma ray burst (GRB) that potentially emitted more energy in a few seconds than our Sun will in its entire lifetime.

With that kind of power, GRBs are the most energetic explosions scientists know of, and are believed to be responsible for the creation of the heaviest elements in the universe like gold and platinum.

And now, for the first time, a short-duration GRB designated GRB 211106A has been captured in millimeter light using the Atacama Large Millimeter Array (ALMA).

"This short gamma-ray burst was the first time we tried to observe such an event with ALMA," said Wen-fai Fong, Northwestern University assistant professor andco-author of a new study, which is set to be published in an upcoming issue of Astrophysical Journal Letters, in a statement.

GRBs short duration ones in particular are exceedingly difficult to capture. According to the scientists, only six have been detected, ever and even then, only in radio wavelengths.

"Afterglows for short bursts are very difficult to come by, so it was spectacular to catch this event shining so brightly," Fong added.

Although capturing short GRBs at millimeter wavelengths may sound like a small distinction to a layman, its actually a pretty big deal, the scientists say.

"What makes GRB 211106A so special is its not only the first short-duration GRB that we detected in this wavelength, but also, thanks to the millimeter and radio detection, we could measure the opening angle of the jet," said study co-author Ruoco Escorial in the statement.

"This is essential to infer the real rates of short GRBs in our universe and to compare them with the rates of binary neutron star or neutron star and black hole mergers."

In other words, using the millimeter data, scientists can begin to calculate just how frequently these kinds of cosmic bursts occur a fascinating glimpse into some of the most energetic events in the known universe.

More on GRBs: After Decades, Mystery Surrounding Giant Space Explosions Is Solved

More here:

Astronomers Just Watched a Neutron Star Hulk Smash Another Star - Futurism

James Webb Catches a Glimpse of the Most Distant Star in the Universe – Futurism

"Nobodys ever seen a star this highly magnified, not to mention a galaxy."Far, Far Away

NASA's James Webb Space Telescope has snapped a photo of the most distant star in the known Universe some 12.9 billion light-years away and even as a tiny dot, it's a sight to behold.

A group of astronomers, who go by the name Cosmic Spring JWST, posted the new image of the star named Earendel which was named after a character in JRR Tolkien's novel "The Silmarillion" to Twitter on Tuesday, pointing out that it's "the most distant star known."

The image, which was taken by the James Webb telescope over the weekend, isn't technically the first time we've gotten a glimpse of the star.

Earendel was first spotted by the telescope's predecessor, the Hubble Space Telescope, back in March. As NASA noted in a statement at the time, the star existed within the first billion years after the Big Bang.

The star is located within the Cetus constellation, which, in turn, is locatedin the Sunrise Arc galaxy, a galaxy named after its crescent shape.

The James Webb Space Telescope was able to spot the distant star thanks to gravitational lensing, taking advantage of massive galaxy clusters bending the light from objects behind them.

In fact, Earendel perfectly aligned with the cluster in front of it. "Thats a really lucky alignment," Dan Coe at the Space Telescope Science Institute in Maryland, and team member of the new discovery, told New Scientist. "Nobodys ever seen a star this highly magnified, not to mention a galaxy."

It's an astonishing new record. In fact, the star is more than ten billion light-years more distant than the next-furthest star we've ever seen, according to New Scientist and the James Webb space telescope is only getting started.

More on the Webb telescope:Incredible New James Webb Image Shows "Cartwheel Galaxy" in Glorious Detail

See the rest here:

James Webb Catches a Glimpse of the Most Distant Star in the Universe - Futurism

The Earth Is Spinning so Fast, We Might Have to Turn Back the Clock – Futurism

The Earth's spin is really starting to pick up speed.

As CBS News reports, June29 was the fastest day in recorded history, clocking in at 1.59 milliseconds shorter than the average 24 hours we know and love.

According to a recent study, the Earth started to spin faster back in 2016 and, on average, the days have become shorter ever since.

The rotation change hasn't been enough to render every single day shorter, according to the study's authors, but the impact has been pronounced enough to get the scientific community buzzing.

And if the trend continues which it very well might mankind will likely have to make some changes to atomic time, or the universal way that time on Earth is measured, according to experts.

But that's not exactly easy, especially when the tech industry reallydoesn't want that to happen. Ever heard of the infamous Y2K bug?

Historically speaking, Earth has never kept perfect time. A number of factors, from its magma core to ocean tides, can impact how fast the Earth spins. And as The Guardian points out, our planet has actually spun a bit slower in recent centuries than it has in the distant past.

Though there are some different theories floating around, the study co-authors told CBS that they believe changes in ocean tides are likely to blame for the recent rotation change.

To address the issue of, well, time being wrong, scientists have advocated for the introduction of negative leap seconds rather than adding an hour like we do during leap years, they call for the artificial subtraction of time from the world time clock.

This potential solution, however, may present an entirely separate set of issues. The tech industry overwhelmingly opposes the introduction of negative leap seconds, as they could wreak havoc on system interfaces.

"Negative leap second handling is supported for a long time and companies like Meta often run simulations of this event," Meta engineers Oleg Obleukhov and Ahmad Byagowi told CBS. "However, it has never been verified on a large scale and will likely lead to unpredictable and devastating outages across the world."

Regardless, if noticeably shorter days like last week's anomaly persist, we'll need a fix and like most things, we might not all be particularly happy with what that solution turns out to be.

READ MORE: Earth is spinning faster than usual and had its shortest day ever [CBS News]

More on Earth spinning too fast: The Earth is Spinning So Fast, We Might Need to Skip a Second

Read the original:

The Earth Is Spinning so Fast, We Might Have to Turn Back the Clock - Futurism

Man Who Lost $180 Million Bitcoin Hard Drive 9 Years Ago Still Trying to Dig Through Trash – Futurism

He's not ready to give up.Get Over It

Moving on is hard.

Just ask UK-based IT engineer James Howells, who, almost a decade ago, accidentally threw away a hard drive containing over $180 million worth of Bitcoin and is still clinging onto hope that it's recoverable.

Howells mistakenly chucked the hard drive, which allegedly contains about 8,000 Bitcoin, back in 2013, well before the cryptocurrency shot up in both popularity and value.

By today's standards, whatever's on that hard drive if it even turns on is worth a lot, just under $184 million to be precise.

Since early last year, Howells has been lobbying the Newport city council to let him comb through all of the landfill's trash in order to find it.

Most recently, he claimed to have secured funding and a top-notch, trash-digging team to support the hunt but as the BBC reports, the council has once again rejected his search citing environmental concerns.

Among claims that his newly-assembled team boasts environmental experts, Howells' most recent plea to the council outlined plans to incorporate assistive AI and robot dogs in the effort.

"We've basically got a well-rounded team of various experts, with various expertise, which, when we all come together, are capable of completing this task to a very high standard," the IT tech told the BBC.

To sweeten the pot, Howells offered to put ten percent of the recovered Bitcoin into crypto-based town projects, including a clean energy-powered crypto mining site, a one-time handout to all residents of $61 worth of crypto, as well as access to crypto-based sales terminals in all local shops.

But that's all predicated on Howells finding the damn drive and discovering that it still works. Then there's the fact that the outlook of the crypto market is looking less than stellar these days.

Shockingly, the city still won't let Howells' team dig up the town's landfills.

"Part of this is managing the ecological risk to the site and the wider area," a council spokesperson told the BBC. "Mr. Howells' proposals pose significant ecological risk which we cannot accept, and indeed are prevented from considering by the terms of our permit."

READ MORE: Bitcoin: Missing hard drive could fund Newport crypto hub [BBC]

More on crypto woes: Man Wakes Pregnant Wife to Tell Her He Lost $100,000 on Crypto

Go here to read the rest:

Man Who Lost $180 Million Bitcoin Hard Drive 9 Years Ago Still Trying to Dig Through Trash - Futurism

Earth About to Be Blasted By a Storm Ejected From the Sun’s "Southern Hole" – Futurism

Whoever smelled it, dealt it.Coronal Ejections

We don't wanna freak you out or anything but there's about to be a massive gas ejection from the Sun's coronal hole.

But we promise, it's not as bad as it sounds.

AsSpaceWeather reports, "gaseous material is [flowing] from a southern hole in the Sun's atmosphere," and it's going to hit Earth's atmosphere on August 3.

Fortunately, as gross as that sounds, these kinds of geomagnetic storms are both pretty commonplace and not a huge risk to us back on Earth.

These sorts of holes in the Sun's corona the outermost part of its atmosphere occur in spots when the star'sgas or plasma becomes cooler and less dense, as Space.com notes.

From these holes, solar material is able to surge outward at more than a million miles per hour.

Luckily, Earth's magnetic field absorbs these solar winds with little more than a slight compression of electrons at our poles.

Generally, the worst that happens when these winds hit our magnetosphere is some interference with low-frequency GPS and radio waves and possibly some minor satellite malfunctions.

In fact, these storms can also trigger some spectacular light shows, commonly known as the Northern Lights.

This expected solar storm is no different, and as a category G1 storm, it's expected to be weak, according to Space.com.

Which means we don't need to be worrying about this particular hole as the Sun heads into its most active storm season in its 11-year-long cycle.

READ MORE: Solar storm from hole in the sun will hit Earth on Wednesday (Aug. 3) [Space.com]

More on sexy atmospheres:ESA Unveils Plan to Send Spacecraft Through Venus' "Hot, Thick" Atmosphere

Original post:

Earth About to Be Blasted By a Storm Ejected From the Sun's "Southern Hole" - Futurism

VIP AUDIO 8/3 East Coast Cast VIP Aftershow (NSFW): Trav and Rich talk 1919 French futurism, will certain wrestlers get their names back, United…

SPOTLIGHTED PODCAST ALERT (YOUR ARTICLE BEGINS A FEW INCHES DOWN)...

SHOW SUMMARY:Rich and Travis are back doing VIP and it feels so good! They spend twenty minutes discussing 1919 French futurism, anachronism, and predicting the year 3022. Will certain wrestlers get their names back? Will Elias ever have Sampson as a last name again or are the terrible WWE naming conventions still alive and stupid as hell? Big time praise for the simple yet effective storytelling surrounding the United States Championship on Raw Monday. Rich recaps AEW Dynamite that he listened to like an old time radio show. Travis updates his book club challenge. Three weeks worth of mailbag to slog through.

DIRECT LINK:VIP AUDIO LINK

NOT VIP? NO PROBLEMCLICK HERE FOR VIP SIGN UP INFO

Link:

VIP AUDIO 8/3 East Coast Cast VIP Aftershow (NSFW): Trav and Rich talk 1919 French futurism, will certain wrestlers get their names back, United...

MIT Claims New Artificial Neuron 1 Million Times Faster Than the Real Thing – Futurism

"This is not a faster car, this is a spacecraft."Mind-Numbing

Think and youll miss it: researchers at MIT claim to have successfully created analog synapses that are one million times faster than those in our human brains.

Just as digital processors need transistors, analog ones need programmable resistors. Once put into the right configuration, these resistors can be used to create a network of analog synapses and neurons, according to apress release.

These analog synapses arent just ultra-fast, they're remarkably efficient, too. And that's pretty important, because as digital neural networks grow more advanced and powerful, they require more and more energy, increasing their carbon footprint considerably.

As detailed in a new paper, the researchers hope their findings will advance the field of analog deep learning, a burgeoning field of artificial intelligence.

By ditching the normally used organic mediums and opting for high tech glass, known as inorganic phosphosilicate glass (PSG), instead, the researchers were able to reach nanosecond speeds, which were faster than the synapses in the human brain.

"The action potential in biological cells rises and falls with a timescale of milliseconds, since the voltage difference of about 0.1 volt is constrained by the stability of water," said senior author and professor of nuclear science Ju Li, in the statement. "Here we apply up to ten volts across a special solid glass film of nanoscale thickness that conducts protons, without permanently damaging it."

"And the stronger the field, the faster the ionic devices," he added.

Because PSG can withstand high voltages without breaking, it allows the protons to travel at ludicrous speeds while also being incredibly energy-efficient.

The material is both common and easy to fabricate, making it not only the fastest option, but also a practical one.

"Once you have an analog processor, you will no longer be training networks everyone else is working on," said lead author Murat Onen in the statement. "You will be training networks with unprecedented complexities that no one else can afford to, and therefore vastly outperform them all."

"In other words, this is not a faster car, this is a spacecraft," he added.

More on AI: Authors Are Starting to Use AI to Quickly Churn Out Novels

See the article here:

MIT Claims New Artificial Neuron 1 Million Times Faster Than the Real Thing - Futurism

Android Malware May Have Charged Millions of Customers Without Permission – Futurism

The apps literally disguised themselves.Player Played

A Russian security services firm said on Tuesdaythat 28 apps containing malware had been downloaded nearly 10 million times from the Google Play Store.

Dr. Web, founded in 2003, said in its monthly threat report that adware trojans were included in Android apps like photo editing software, keyboard and utility apps, wallpaper collection apps and more.

Many hid in plain sight by changing their app icons to mimic an important system app in the hopes users wouldn't delete them. From the shadows, they were likely subscribing people to paid mobile services without permission and constantly displaying ads to make money.

Although Google says it checks apps for malware before they hit the Play Store, some are clearly slipping through the cracks. Even worse, those that have been taken down stay on a user's phone until they're manually deleted.

Repeated issues like this may poke holes in pending legislation like the Open App Markets Act, which would force phone manufacturers like Apple and Android to allow "side loading" apps. Side loading lets users download apps from outside official app stores.

Yesterday, 9to5Mac reported that Apple sent a letter to Congress blasting side loading because of how much malware Android users suffer. The company claimed Android ecosystems have 50 times more than iOS. Dr.

Preventing software monopolies is one thing, but side loading could hurt more than help. As for preventing future infections, that's up to users for now. One Twitter netizen it up simply earlier today.

"Stop downloading random apps," the commenter said.

More on fixing mistakes: Netflix Is Letting Directors Retroactively Edit Shows Now

Visit link:

Android Malware May Have Charged Millions of Customers Without Permission - Futurism

This Is the Boba Fett Gear Every Fan Needs in Their Life – Futurism

Though The Book of Boba Fett may have ended (and the possibility of a season two is still in the hints and whispers stage), our love for the cloned bounty hunter remains as eternal as a sarlaccs digestive process. Sharp enough for your wardrobe and deserving of a spot on your shelf, this is the Boba Fett swag that marks you as a true fan of Mos Espas new resident Rancor rider.

Key Selling Point: A stealthy bounty hunter design on a basic heathered tee.

If you prefer Boba Fett back in his more fearsome pre-sarlacc days, grab this heathered tee. Fetts signature EE-3 carbine blaster is crossed below his helmet and just above his Mandalorian sigil, in a design thats subtle and understated as any good bounty hunter should be.

Key Selling Point: Cool enough to show off and challenging enough to absorb you for an hour or two.

There was a time when displaying either LEGO or Star Wars paraphernalia could be deemed unprofessional. Now if senior management doesnt have a bit of whimsy behind them on their Zoom screens, theyre probably too rigid to work with. This office-caliber LEGO kit is all grown up, with 625 pieces that form an 8.5-inch tall Boba Fett helmet, complete with a museum-style name plate.

Key Selling Point: A palm-sized speaker with big sound and a wicked Fett paint job.

Bitty Boomers have managed to do two things remarkably well: give boring speaker casings a pop-culture makeover, and crank out room-filling sound from a two-inch package. This Boba Fett speaker fits in the palm of your hand, connects via Bluetooth to your phone, and runs for four hours on one charge. Pair it with a Mando Bitty Boomer for Beskar-clad stereo sound.

Key Selling Point: The classic, big-headed POP treatment comes to the iconic Book of Boba Fett scene.

Naturally youve already got the POP Boba Fett vinyl figure. So now you need this. With the unfathomably badass Fennec Shand by his side, this POP Moments scene commemorates Boba Fett taking the throne at Mos Espa. These guys look ready to take all comers, from Hutts to spice traffickers, and will look even better on your shelf.

Key Selling Point: A steely gray mythosaur skull to salute all warriors from Mandalore.

Is Boba Fett a Mandalorian? His father was a foundling just like Din Djarin, whos arguably the most famous of the Mandalorians with his eponymous show and all. Plus Bobas got that hard-won, nigh-on-indestructible Mandalorian armor. So we say yes. This gray-on-black mythosaur skull is the sigil emblazoned on Fetts armor throughout The Book of Boba Fett.

Key Selling Point: The classic board game with an immersive Star Wars skin.

With the same game-play as Monopoly, the Boba Fett version of the classic game swaps out properties like Marvin Gardens and Baltic Avenue for characters like Lando Calrissian and Han Solo. Skull and wheat sigils replace houses and hotels, and instead of a thimble or a race car, player tokens are four different Boba Fetts.

Key Selling Point: Get it? Boba? Like the tea? Strictly for Fett fans with a sense of humor.

What if you like both Boba Fett and boba tea? Then you are a person of good taste who should be rewarded with an enamel pin for your many-points-of-flair jean vest. This one is made by collectible pin maker, Yesterdays, and measures 1.25 inches tall.

Even before we found out this dude survived a freaking sarlacc pit, we knew Boba Fett was a star. With just four lines in the original trilogy, the masked bounty hunter was better than fifty Bib Fortunas something he demonstrated handily when he was finally given his own show. Forget the days when the best gift you could hand a Boba Fett fan was a cracked action figure off eBay this stuff is worthy of the baddest bounty hunter in a galaxy far, far away.

This post was created by a non-news editorial team at Recurrent Media, Futurisms owner. Futurism may receive a portion of sales on products linked within this post.

Excerpt from:

This Is the Boba Fett Gear Every Fan Needs in Their Life - Futurism

Horror stories of cryonics: The gruesome fates of frozen bodies – Big Think

Several facilities in the U.S. and abroad maintain morbid warehouse morgues full of frozen human heads and bodies, waiting for the future. They are part of a story that is ghoulish, darkly humorous, and yet endearingly sincere. For a small group of fervent futurists, it is their lottery ticket to immortality. What are the chances that these bodies will be reanimated? Will baseball legend Ted Williams frozen head be awakened to coach fighter pilots or fused to a robot body to hit .400 again?

Cryonics attempting to cryopreserve the human body is widely considered a pseudoscience. Cryopreservation is a legitimate scientific endeavor in which cells, organs, or in rare cases entire organisms may be cooled to extremely low temperatures and revived somewhat intact. It occurs in nature, but only in limited cases.

Humans are particularly difficult to preserve because of the delicate structure in (most of) our heads. Deprived of oxygen at room temperature, the brain dies within minutes. While the body may be reanimated, the person who lives is often in a permanent vegetative state. Cooling the body may give the brain a bit more time. During brain or heart surgery, circulation may be stopped for up to an hour with the body cooled to 20 C (68 F). A procedure to cool the body to 10 C (50 F) without oxygen for additional hours is still at the experimental research stage.

After a while, he let the bodies thaw out inside the capsule and left the whole thing festering in his vault.

When a cryonic patient dies, a race begins to prepare and cool the body before it decays and then to place it inside a Dewar: a thermos bottle full of liquid nitrogen (LN). The inner vessel of the Dewar contains a body, or bodies, wrapped in several layers of insulating material, attached to a stretcher, and suspended in LN. The head is oriented downward to keep the brain the coldest and most stable.

This vessel lies within a second outer vessel, separated by a vacuum to avoid heat transfer from the outer room-temperature vessel wall to the cold inner vessel wall. Heat gradually transfers across anyway and boils away the LN, which must be periodically refilled. Bodies were originally, and may still be in some cases, cooled and frozen in whatever condition they were in at death, with better or worse preservation, as we shall see.

The early years of cryonics were grisly. All but one of the first frozen futurists failed in their quest for immortality.

Subscribe for counterintuitive, surprising, and impactful stories delivered to your inbox every Thursday

Small freezing operations began in the late 1960s. While the practice of storing bodies has become more sophisticated over the past 50 years, in the early days, technicians cooled and prepared corpses with haste on dry ice before eventually cramming them into Dewar capsules. By in large, these preservations did not achieve preservation. They were nightmarish, gruesome failures. Their stories were researched and documented by people within the field, who published thorough and frank records.

The largest operation was run out of a cemetery in Chatsworth, California by a man named Robert Nelson. Four of his first clients were not initially frozen in LN but placed on a bed of dry ice in a mortuary. One of these bodies was a woman whose son decided to take her body back. He hauled (his dead mother) around in a truck on dry ice for some time before burying her.

The bodies in the container partially thawed, moved, and then froze again stuck to the capsule like a childs tongue to a cold lamp post.

Eventually, the mortician was not pleased with the other bodies sitting around on beds of ice, so a LN Dewar capsule was secured for the remaining three. Another man was already frozen and sealed inside the capsule, so it was opened, and he was removed. Nelson and the mortician then spent the entire night figuring out how to jam four people who may or may not have suffered thaw damage into the capsule. The arrangement of bodies in different orientations was described as a puzzle. After finding an arrangement that worked, the resealed capsule was lowered into an underground vault at the cemetery. Nelson claimed to have refilled it sporadically for about a year before he stopped receiving money from the relatives. After a while, he let the bodies thaw out inside the capsule and left the whole thing festering in his vault.

Another group of three, including an eight-year-old girl, was packed into a second capsule in the Chatsworth vault. The LN system of this capsule subsequently failed without Nelson noticing. Upon checking one day, he saw that everyone inside had long thawed out. The fate of these ruined bodies is unclear, but they might have been refrozen for several more years.

Nelson froze a six-year-old boy in 1974. The capsule itself was well maintained by the boys father, but when it was opened, the boys body was found to be cracked. The cracking could have occurred if the body was frozen too quickly by the LN. The boy was then thawed, embalmed, and buried. Now that there was a vacancy, a different man was placed into the leftover capsule, but ten months had elapsed between his death and freezing, so his body was in rotten shape no pun intended from the get-go and was eventually thawed.

Every cryonic client put into the vault at Chatsworth and looked after by Nelson eventually failed. The bodies inside the Dewar capsules were simply left to rot. Reporters visited the crypt where these failed operations had taken place and reported a horrifying stench. The proprietor admitted to failure, bad decisions, and going broke. He further pointed out, Who can guarantee that youre going to be suspended for 10 or 15 years?

The worst fates of all occurred at a similar underground vault that stored bodies at a cemetery in Butler, New Jersey. The storage Dewar was poorly designed, with uninsulated pipes. This led to a series of incidents, at least one of which was failure of the vacuum jacket insulating the inside. The bodies in the container partially thawed, moved, and then froze again stuck to the capsule like a childs tongue to a cold lamp post. Eventually the bodies had to be entirely thawed to unstick, then re-frozen and put back in. A year later, the Dewar failed again, and the bodies decomposed into a plug of fluids in the bottom of the capsule. The decision was finally made to thaw the entire contraption, scrape out the remains, and bury them. The men who performed this unfortunate task had to wear a breathing apparatus.

Out of all those frozen prior to 1973, one body remains preserved. Robert Bedford was sealed into a Dewar in 1967. Instead of leaving the body to meet a horrific fate under Nelsons care, Bedfords family took custody of the capsule, meticulously caring for it at their own expense. The body was handed off between professional cryonics operations, occupying multiple frozen tanks and facilities for 15 years or so. Eventually it ended up in the hands of the founders of Alcor a modern cryonics outfit one of whom wrote a heartfelt, slightly creepy piece about the body.

Credit: Jeff Topping / Getty Images

Alcor is the leading example of the current state of cryonics. While the ugly events above suggest that your remains might well end up as tissue sludge scraped out of a can, the professionalism of companies like Alcor may offer an increased chance for long-term preservation. This 501(c)(3) organization hosts researchers who work on methods to improve the freezing process, possibly increasing whatever slight odds exist that human popsicles will ever be brought back to life. At a more fundamental level, it appears to be stable and to have deep pockets, so there is a better chance that your corpse will be around long enough for some distant future doctor to recoil in horror at it.

The U.S. industry has consolidated around two main organizations. If not Alcor, your other choice is the Cryonics Institute, which has more than 200 bodies stored in giant tanks and accepts dozens more each year. Apparently, ten years ago, head storage alone at Alcor cost $80,000, while full body storage at the Cryonics Institute was only $30,000. There are international options as well. A Russian cryogenics company stores not only people but pets, including one entry under rodents, a deceased chinchilla named Button.

Modern cryonic preparations at Alcor employ a multistep process to prepare the body for storage. First, they begin to cool the body while anti-clotting agents and organ preservation solutions are injected into the bloodstream and circulated under CPR. The body is then transported to the companys main facility, where the original fluid is replaced with chemicals that vitrify turn to glass the bodys organs. This offers some hope for cutting down on structural damage during the subsequent cooling and storage. Then the body is entombed in its Dewar capsule.

That all sounds scientific and careful. But is it really science or just applying scientific tools to a fantasy proposition? Is it possible to freeze the human body and revive it decades later? Currently, its not remotely plausible. Will it ever be? Thats probably an open question. As it stands now, cryonics is a bizarre intersection of scientific thinking and wishful thinking.

Credit: Annelisa Leinbach / Big Think

While cryonic preparation is now more advanced, the laws of physics demand that the structure of the body will break down rapidly after death, catastrophically upon freezing, and gradually over time, even while frozen. Think of how badly frozen food ages in your freezer. If the medical technology of the future becomes advanced enough, perhaps these corpses can be revived. But thats a big if. Lets say your body remains frozen until the 25th century. Then, lets say that future doctors are interested in reviving you. How much work will they have to do to fix you once youre thawed? The answer lies in the condition of the bodies once theyre thawed. Strangely enough, we know something about this.

In 1983, Alcor needed to lighten three cryonauts, reducing them from bodies to simply heads. (In one transhumanist conception of the future, medical science will be able to revive the brain and then simply make a new body or robot to which to attach it. Neuropreservation is cheaper and easier too.) The three corpses were removed from their Dewar capsules so that the heads could be cut off still frozen, so requiring a chainsaw and stored separately. Once the heads were sawed off and put away, Alcor employees got to work medically examining the state of the bodies. They wrote up their findings in great detail.

At first, things looked reasonably good. While the bodies were still frozen, their skin was only moderately cracked in a few places. But once the bodies thawed, things started to go downhill.

The organs were badly cracked or severed. The spinal cord was snapped into three pieces and the heart was fractured.

Cracks appeared in the warming bodies, cutting through the skin and subcutaneous fat, all the way down to the body wall or muscle surface beneath. One patient displayed red traces across the skin following the paths of blood vessels that ruptured. Two of the patients had massive cutaneous ruptures over the pubis. The soft skin in these areas was apparently quite susceptible to cracking.

While the external damage was extensive, the internal damage was worse. Nearly every organ system inside the bodies was fractured. In one patient, every major blood vessel had broken near the heart, the lungs and spleen were almost bisected, and the intestines fractured extensively. Only the liver and kidneys werent completely destroyed.

The third body, which had been thawed very slowly, was in better condition externally, with only a few skin fractures and no obvious exploded blood vessels. However, the inside was even more annihilated than the others. The organs were badly cracked or severed. The spinal cord was snapped into three pieces and the heart was fractured. The examiners injected dye into an artery in the arm. Rather than flow through blood vessels and into muscles, most of it pooled under the surface in pockets and leaked out of skin fractures.

The medical examiners extensively detailed the content of the blood, the texture of the muscles, and the extent of the damage. They included pictures. And they earnestly stated their conclusion up front: The tremendous tissue deterioration will require incredibly advanced medical technology to fix. Worse, the probable destruction at the cellular level may require rebuilding the body at the molecular level. Perhaps future medicine might be able to inject swarms of nanobots into your body to repair every bit of tissue, but dont bet on it happening any time soon.

Modern cryonics practices may ward off the horrific failures of the past. And we cant entirely rule out future medicine somehow finding fixes for the terrific damage incurred by the body in freezing, sitting, and thawing. But theres one more hurdle for the future revivification of your frozen form, the last great danger to your immortality: your crazy relatives. Several cases demonstrate the problem.

The family of a man frozen in 1978 eventually got tired of paying for him. The facility offered to cut off his head and store it for free, but the family turned them down. Instead, the body was thawed, submerged in a vat of formaldehyde like a laboratory specimen, and buried in that condition. Two further men were stored by their sons, one of whom had his father thawed, removed, and buried. The other son eventually buried his dads capsule in its entirety with the remains still inside.

Relatives can also go to court and battle over what happens to your corpse. Richard Orvilles family buried him against his wishes and was eventually forced by an Iowa court to dig up his body for preservation. A Colorado womans family went to court to fight Alcor for their mothers head. Alcor eventually got the head, to preserve as best they could. Conversely, another womans will stated that she did not want to be frozen. Her husband froze her anyway, and after a four-year court battle, the State of California ordered that she be thawed and buried.

One particularly well-known family affair is the story of a frozen Norwegian man who was initially stored at a California facility that worked with Alcor. He was removed by his daughter, who stored him in an ice shed behind her house in Colorado. The body was discovered when she was evicted from the property. The small town of Nederland, Colorado now has a Frozen Dead Guy Days celebration every year.

While the chances of immortality may be slim, dozens of people still commit their bodies or brains to cryonics each year. If their remains arent mismanaged or allowed to disintegrate, and if their relatives dont go to court over the body, there is now a good chance that they will remain frozen for decades. Unfortunately, they will come out of the process cracked into a million pieces, and the prospect of putting them back together again is purely science fiction for the foreseeable future. Its a grim practice with ghoulish results; at least it makes for some fascinating stories and a bit of dark humor.

See more here:

Horror stories of cryonics: The gruesome fates of frozen bodies - Big Think

Scientists Warn of Devastating Mass Extinction Event Caused by Climate Change – Futurism

Okay, that's pretty grim.Mass Extinction

A new climate modeling studyis offering an ominous glimpse into the future of pretty much every species on the planet, ScienceAlert reports.

Scientists believe life on Earth's has been shaken by several mass extinction events over the last half a billion years or so. These events have most often followed sweeping periods of climate change, which has historically been triggered by a number of natural factors including asteroids and volcanoes.

Over the course of each climate catastrophe, various species of plants and animals have had to adapt to survive or risk disappearing forever.

But according toa new study by Tohoku University climate scientist Kunio Kaiho, which was published in the journal Biogeosciences last month, the human-made climate change we're dealing with today will likely take place over a much smaller period of time than previous extinctionevents leaving species everywhere with far less time to adapt.

The greatest known mass extinction occurred over the course of about 60,000 years. According to Kaiho's worst-case prediction, the Earth could reach a roughly 16-degree Fahrenheit increase in just a few hundred years enough to trigger another event, but substantially less time for evolution to catch up.

Upon examining the severity of each mass extinction event, Kaiho found a linear relationship between the degree of temperature change and the plight of plants and animals. Essentially, the more extreme the planetary heating or cooling, the harder it was for species to survive.

While these changes will take place over several hundred years, humans, plants, and animals are already facing climate change-induced catastrophes.

All the more reason not to leave all of the cleanup to our descendants that is, if humans will still be around by then.

More on extinction: Zoo Saving DNA from Rare Animals in Case They Go Extinct

Go here to read the rest:

Scientists Warn of Devastating Mass Extinction Event Caused by Climate Change - Futurism

Someone Asked an AI to Show the "Last Selfie Ever Taken" and Um – Futurism

Is heaven filled with... ghoulish grim reapers?Spooky Selfie

If you've ever wondered how a selfie at the end of the world, or possibly some sort of hellish purgatory, might come out... well, frankly, neither have we. But somebody wanted to know, and at the behest of an AI image generator,a picture of such a thing hath been revealed.

Behold: a series of ghoul-filled "selfies" that feature skeletal, grim reaper-like figures, one of which even captures itself mugging in the mirror via smartphone.

The TikTok video of the requested imagery was posted to an account called what else @robotoverloards, which has a bio touting "daily disturbing AI generated images" as its mission. Happy summer!

The video's creator didn't say which text-to-image AI system was responsible for the image generation. One commenter insisted that they were made with Midjourney, a self-described "small self-funded team focused on design, human infrastructure, and AI," however @robotoverlords included references to both Midjourney and DALLE-E 2, the Elon Musk-founded OpenAI's newly revamped platform, in the hashtags.

Oddly, though the undead figures are indeed quite ghoulish, each one is set against heavenly backgrounds. One holds a handful of flowers, while all of the figures are seen in front of fluffy, sunshine-filled clouds.

"Interesting that it gave a bouquet to the first person," wrote an inquisitive TikTokker.

Maybe angels have a different look than we all thought? Perhaps hell is a cloud-filled, sun-soaked nightmare? Or, more likely, the the AI image-maker responsible provided us with a portrait of the afterlife that took multiple human descriptions of what life after death looks like, and gave us a AI-generated mashup of the two.

Either way, it was nice to see some positivity in the comments. As one user remarked: "I'm okay with this."

More on AI image generators: Ai Generates Painting of Actual "Burger King" And There's a Terrifying Hunger in His Eye

Go here to read the rest:

Someone Asked an AI to Show the "Last Selfie Ever Taken" and Um - Futurism

Review: Create Your Own Miniatures with the Anycubic Photon M3 3D Printer – Futurism

Whether youre an artistic type, an analytical problem solver, or in a dynamic field that requires a refined touch, youre likely to find numerous benefits in 3D printing. 3D printers have been on the market for a long time, and somehow people are still finding new uses for them.

Created back in the '80s with the intention to advance prototypes in manufacturing, 3D printing has since made an incredible impact on countless other industries; be it in dentistry, medicine, education, automotive, and really everything in between. By layering materials (such as plastic, metal, carbon fiber, resins, and many others) over each other and fusing them together with methodical precision, a 3D printer can easily create your desired pieces while you sit back, relax, and brainstorm about what youll print next.

I began my 3D printing journey several years ago when I bought a Monoprice open-frame printer. Since then, Ive been able to use 3D printing as an artistic release, as well as engineer things that have had a direct benefit to my life and others. Early on, as I was getting out of my car, I noticed a small plastic piece of my door handle had fallen off. I didnt know what it was, or how to even search for a replacement online. After taking some measurements, I was able to replicate this piece with my 3D printer and in a matter of hours, had replaced it with ease something I would have never been able to do by hand.

Whether Im creating bag tags for the youth soccer team I coach to create a sense of unity, prototyping useful tools with friends, or experimenting with new designs, having a 3D printer has paid for itself many times over. Lately, Ive been testing out the Anycubic Photon M3 3D printer, and have been thoroughly impressed by the speed, silent printing, and incredible detail its capable of. Having tried out several models and builds, I can say without a doubt that this is a 3D printer seasoned professionals would appreciate, and newcomers to the resin-printing field could happily take a crack at.

Specs: Dimensions: 10.6 inches L x 10.1 inches W x 16.7 inches H Weight: 15.4 pounds Compatible Materials: Resin Print Volume: 6.4 inches L x 4 inches W x 7.1 inches H Print Speed: Up to 50mm/h

Anycubic has made a name for itself among the 3D printing community as one of the leading manufacturers for DIY printing. Though theyve been around since only 2015, theyve become known for developing top-of-the-line 3D printers for home use and for regularly improving their users experience.

The Photon M3 comes equipped with just about everything youll need to get started, however Id suggest adding on the resin itself to your order. In addition to the printer, Anycubic included gloves and a mask for safety purposes, a scraper, a screen protector for the LCD monochrome screen, a resin vat, tool kit, USB memory stick (as this printer doesnt have WiFi compatibility), a user manual, and a funnel so you can pour your material back into the bottle when youre finished with it. In terms of what you get for the price, the box was surprisingly full.

The 3D printer itself came together in a breeze. In fact, it took me longer to remove the packaging and initially check out all of the items than it did to assemble the printer, needing only four hex bolts and three thumb screws. Just a few minutes later, Id finished setting up the leveling and Z-offset wizard, and was ready to take it for a whirl.

The Photon M3 is the first resin 3D printer Ive tested, and it differs greatly from any fused deposition modeling (FDM) printer out there. While filament, used in FDM 3D printers, is a solid material that often comes wrapped around a spool, the Photon M3 uses resin. Resin is a liquid solution that solidifies after photocuring with UV light.

Comparatively, the Photon M3 can do far more in terms of pristine, unrivaled detail than any FDM printer could. 3D printers that use filament often build from the bottom up, melting and depositing layers of whats essentially plastic strings of material. This method, though popular, often doesnt produce the high-quality detail that resin does, and can lead to stringing (when artifacts and small strings are left on your printed piece, even after cleaning it up).

How the Photon M3 differs from this is, firstly, that it builds itself upside down (from the top up). The resin, like filament, goes on one layer at a time, but is cured between every layer for optimum efficiency and quality. I have never been able to create a realistic LEGO brick with an FDM printer, but with the Photon M3, I was able to print several compatible pieces that could seamlessly clip on to my other LEGO, despite a little bit of elephant foot. No matter the level of detail or difficulty, with every piece I threw at the Photon M3, the end result was always a clean, smooth, and slick structure. It truly seems like theres nothing it cant print.

Not only is the 3D printer amazingly speedy and quiet, but I was honestly astounded by the level of detail the Photon M3 was capable of. Having tested it out with some Settlers of Catan tile models and comparing them to the same file printed with an FDM printer, the comparison was mind-blowing. Not only is the Photon M3s finished product clean and smooth, the tiniest details were visible which was especially impressive on a tinier model.

Something to note is that your builds will be a little smaller than you may be used to, with a maximum build size of 6.4 inches L x 4 inches W x 7.1 inches H. For comparably priced filament printers, you would expect at least a couple extra inches to work with, but this is easily made up by the level of detail your models will showcase.

The way the Photon M3 accomplishes these near-exact masterpieces is down to the cleverly crafted screen, plate, high-functioning software, and of course, the use of resin. The build plate dips into the resin vat at your current build level, then the screen projects what one layer will look like. After completing this layer and setting it with UV light, it lifts up and goes back down to do another layer; this process repeats until the build is finished.

Something that sets this 3D printer apart is its LCD monochrome screen. Where other resin printers often employ a laser projection, the screen mounted on the bottom of the Photon M3 exposes each layer and then prints them on in succession. This feature, incorporated with the user-friendly software, led to a higher-quality surface finish and enabled impeccable detailing.

The included screen protector is such an important component here, as it keeps your LCD screen scratch-free and allows for a longer lifespan. The LCD is so essential to the entire operation that you want to ensure its protected. If your screen protector becomes damaged, you can easily strip it off and put another one on whereas the screen itself would be a bit trickier to replace.

The front LCD screen and fully compatible Slicer software are also a very nice touch and I found it super easy to use. Once youve inserted the USB drive and you select your file to print, the screen shows you a preview of what the build will look like something Ive not experienced with any 3D printer before. This is especially helpful for those of us who have a poor file-naming convention. Even though the Slicing software wasnt the typical Cura that I was used to, it was easy to navigate.

Laser-Etched Print Bed: Anycubic put a lot of thought into every aspect of this 3D printer, down to its special design of the print bed. This crucial piece of the Photon M3 is laser-etched to create a strong adhesion and keeps your builds from falling off as theyre printing. This is especially handy for heavier models that are more likely to lean or fall out of place, however it is very difficult to remove smaller items from the print bed if theres a large surface area in contact with it.

Printing Capabilities: At 50mm/h, the Photon M3 is wicked fast. At this pace, it only takes two and a half hours to print a 12-centimeter-tall model, which is significantly faster than other leading 3D printers. And for its unbelievable speed and accuracy, the volume at which it operates is incredibly quiet. This may be partially due to the fact that there are very few moving parts in this printer compared to others. Theres only one screw that moves the plate up and down, whereas with a typical filament printer, there would be more armature, and youd need to maintain the belts and ensure everything is lubricated properly. With this in mind, the Photon M3 requires very little maintenance and gives you more time to focus on your creations.

Something thats undeniable about this 3D printer is that it stinks. Literally. Because of the fumes, you wont want to be in the same room while its running unless you have an air purifier, so its important to place it in a well-ventilated space that youre able to walk away from for some time. Thankfully, you can place the hood on it while it runs to keep in some of the smell, as well as to protect your prints from outside UV lights.

Another drawback thats specific to using a resin 3D printer is that youre stuck with a solid build volume. Filament printers can be specified so that your infill is only 10 to 20 percent for example, so youre able to make a hollow shape and save your materials for purely visible and structural aspects. Because of the way a resin print needs to be supported, you cant make any hollow pieces this would also lead to trapped, uncured liquid inside. This makes resin printing more costly, as youll go through more material. Although its less economical, youll always end up with a flawless, durable model.

Finally, resin printing is messy. When you pull your piece out of the printer, its steeped in a liquid that you will need to clean off in a water rinser. To make this step easier, you can get water-rinse resin or high concentrated isopropyl alcohol. Once your item is clean, it needs to be cured in the same machine. Its very easy to wipe off, but youll be messier than if you were to use a filament, and will want to ensure youre working in an area that can get a little dirty. For the print quality though, this is a fair tradeoff.

While the Anycubic 3D printer is extremely efficient and capable of replicating some of the most complex designs, you may want to consider adding on a few more products to make your experience the best it can be.

AirPure Air Purifier Water-Wash Resin Extra Screen Protectors

Overall, my experience testing the Photon M3 3D printer was great. Id wholeheartedly recommend it to those looking to add resin to their arsenal or newbies in the resin field, but its not necessarily the best pick if youre completely new to 3D printing. This is an excellent choice for making toys, figures, or models for Dungeons and Dragons and other tabletop games.

Anycubic is really ahead of the game. I didnt feel like I was really giving anything up, and for such high speed, precision, and low cost, Im blown away.

As told to Mia Huelsbeck

This post was created by a non-news editorial team at Recurrent Media, Futurisms owner. Futurism may receive a portion of sales on products linked within this post.

Link:

Review: Create Your Own Miniatures with the Anycubic Photon M3 3D Printer - Futurism