6 essential etiquette rules for great coworking spaces – Treehugger

Propelled by an ever-changing job market and the advent of new technologies, the coworking trend continues to grow worldwide, with some experts predicting that half of the US workforce will be self-employed by 2020. To stave off the isolation from working alone at home, many of these intrepid professionals will probably work out of a coffee shop or coworking space at one time or another.

Not surprisingly, in this brave new world where one's roster of officemates can change daily, the rules for good neighbourly behaviour aren't necessarily that clear, especially if one prefers to hop around and work out of more than one coworking space. You might think these would be obvious, but as Henry Alford over at the New York Times points out:

One theory of etiquette holds that manners are best in communities with fixed populations: If you know that youll see Tina again tomorrow (and Tuesday and Wednesday), youre less likely to surreptitiously scarf down the rest of the half-eaten boysenberry yogurt she left in the office fridge, because daily exposure to her yogurt-based wistfulness will start to gnaw at you, and ultimately turn you into a Munch painting.

It's a pretty good point, since not all coworking spaces are going to operate like small-scale intentional communities where everyone knows each other. The cardinal rule is to be considerate -- and if you don't know, then ask. All is takes is one or two careless individuals to spoil it for others, so it's useful to know some basic rules for etiquette in these kinds of situations where somewhat unfamiliar people end up sharing the same space.

SelgasCano

This is a big one, especially in places that are designed as open offices. Sound carries, and not everyone wants to hear your phone conversations with clients, or listen to backpacks and equipment banging around as newcomers settle in. Of course, each space will have its own attitudes of tolerance toward noise levels, so if you're new to a space, ask the host what the noise policy is, find out where in the office you can take calls, or take the time to get a feel for what your neighbours can abide.

Friends Work Here

One big perk of coworking spaces is having access to conference rooms where you can hold business meetings, brainstorm with your team, or just have a quiet space to cram in some work without any interruption. But it's a nuisance when when people overstay their allotted time in the conference room -- if you know that time's up, try your best to vacate the room in a timely manner so that the next people up don't spend ten minutes waiting.

Another big problem is that sometimes members will overbook conference rooms "just in case," or forget to cancel their reservation when a client cancels the meeting -- resulting in the room being empty, rather than being used by someone who actually needs it. Everyone is guilty of forgetting to do something as simple as cancelling a room reservation, but it may make the difference in someone else's day if one take a few minutes to do just that.

Imagen subliminal

Another perk of coworking spaces is having access to shared office equipment, such as printers, scanners, or maybe even more specialized things like power tools in a coworking space that doubles as a DIY makerspace, or exercise equipment in a shared office space that offers a gym in-house.

The point is, the keyword here is 'shared'. If you know you're going to print a truckload of pages, perhaps let people know beforehand, just in case someone else needs to print a small job, and let them go first out of courtesy. Considerate behaviour is like a meme: it lives and spreads if someone keeps it alive.

The kitchen is most likely the heart of any coworking space, a communal place that everyone can share meals or chat over a cup of tea or coffee. So it's easier if everyone tries to do their part in keeping it tidy as much as possible, perhaps by putting things back where they belong, and washing the cups and utensils you've used whenever possible. Some spaces may offer free snacks, but make sure you don't accidentally end up eating other people's personal food --especially stuff with someone else's name on it or what's stored in the fridge. Once again, if you don't know, ask. Refrain from microwaving fish for lunch -- it's an olfactory no-no.

SelgasCano

This may seem like a common-sense thing to do in a coworking space -- after all, if you want to be anti-social, you can do it alone, at home. While it's understandable that work can get really busy at certain times, during those slower periods it does make a difference to the overall atmosphere when one makes an effort to introduce oneself and interact with your coworkers, as well as attending events being hosted on-site.

Of course, one of the main advantages of being part of a collaborative office space is that facilitates networking; one might never know what opportunities, connections or mutual sharing of skills could crop up from a simple hello to your neighbour. On the other hand, don't interrupt if someone is clearly busy. It's this open attitude that makes coworking spaces vibrant, creative and welcoming.

Temps Libre

If you're having a good experience with a coworking space, make sure to spread the word. Many of these spaces rely on getting people in through the doors to help them stay in business, so letting others know what you think, or promoting the space through your social networks online will do much toward that end.

In the end, these are just general guidelines, as each coworking space will have their own set of unique ground rules established. It might not be possible to remember all the rules of a particular shared space, but you can't go wrong if you are mindful and considerate of your fellow coworkers, and treat them as you'd like to be treated yourself. When done consistently over time, it'll go far in creating something that feels quite like a supportive community.

Read more from the original source:

6 essential etiquette rules for great coworking spaces - Treehugger

What’s in a name? An intentional shift – urbanmilwaukee (press release)

Like many urban centers in the United States, the Milwaukee region faces large issues that have roots in many causes. Decades ago, the city of Milwaukee The Machine Shop of the World was heralded as one the best places for African Americans in the country. In the decades since, deindustrialization in the American Midwest, the appeal of cheap labor in the union sparse South, the opening of opportunities for businesses to operate on a global scale in places with little if any regulation or standards of living, the retreat of diversity and wealth from the city to surrounding communities to be replaced by the concentration of poverty, disinvestment of schools, and poor transit connectivity have led to a complete reversal of Milwaukees reign as a key place for building a solid middle class life for African Americans.

The perfect storm of these occurrences has resulted in some neighborhoods in American cities, Milwaukee not excluded, to witness an environment where violence particularly gun violence has become all too common. The Milwaukee Homicide Review Commission reports that in 2015, 119 of 145 people slain in Milwaukee were killed by gun and another 633 people suffered non-fatal gunshot injuries. We must be intentional about our efforts to address violence in our community no matter the form in which violence is presented.

I believe that this is important for a number of reasons. Chief among these reasons is that the Office of Violence Prevention is housed within the Milwaukee Health Department. With renewed focused bolstered by the Mayor and Common Council in 2016, this office is playing a critical role in identifying and pursuing meaningful solutions to the root causes of violence in our city from a public health perspective.

Next, too many homicides occur in Milwaukee over arguments, disagreements and minor scuffles that should never result in the loss of life. Then, while we lean on institutions like police for public safety, the department is not and cannot function as the be-all-end-all for each concern that we have in our neighborhoods. While police serve as an essential asset to security in our neighborhoods, no amount of officers alone will reverse the adverse effects of segregation, racial disparities, the educational achievement gap, the income gap between Milwaukees central city and its suburbs, nor the outsized contribution that Milwaukee makes to support other communities around Wisconsin via state shared revenue.

Lastly and again, I think that we should be intentional about not only how we work to solve problems like violence but we should also be intentional in what we call our institutions that are charged with addressing these issues.

In City Hall, the Public Safety Committee served as the Common Councils intersection between police and fire but those entities alone dont represent the totality of the approach needed. Public health is also a critical component to these efforts. The new name of the committee now reflects that fact.

See the original post:

What's in a name? An intentional shift - urbanmilwaukee (press release)

Chicken Sandwich Takes One Giant Leap for Food-Kind – Space.com

A KFC chicken sandwich launched on a mision to the stratosphere aboard a World View Stratollite balloon at 9:11 a.m. EDT (1311 GMT) on June 29.

In what appears to be a historic first, a fast-food chicken sandwich was successfully carried to the edge of space today aboard a high-altitude balloon.

The Kentucky Fried Chicken Zinger sandwich journeyed skyward aboard a World View Enterprises Stratollite balloon vehicle at 9:11 a.m. EDT (1311 GMT) from Page, Arizona. While the live webcast cut out before liftoff, a representative for World View confirmed that the launch was successful, and KFC later released a video of the balloon taking off.

"Holy cow, that's some spicy, crispy chicken moving out at an average rate of 1,000 feet per minute [304 meters per minute]," the announcer in the KFC video said as the balloon lofted skyward. "The Zinger should arrive at target altitude in about 1 hour and 20 minutes, where the Zinger mission will officially begin."

The sandwich is scheduled to remain aloft for four days and maintain an altitude of about 50,000 to 80,000 feet (15,200 to 24,400 meters). During the flight, which is serving as an advertising campaign forKentucky Fried Chicken (KFC), the company will execute various activities to engage the public over social media, including a coupon drop, in which a coupon will literally be dropped from the balloon down to Earth.

"The team on the ground here is justifiably celebrating as they watch their months of hard work pay off," the video announcer said. "This is the greatest achievement in chicken sandwich space travel history. In all my years in this business I've certainly never seen anything like it. What a time to be alive."

The Zinger-1 mission will serve as a test flight for World View, which aims to make stratospheric balloons that can remain in flight for months at a time. The flight is scheduled to be the first "extended-duration development flight of [World View's] high-altitudeStratollitevehicle," according to a statement from the company.

World View's Stratollite high-altitude balloon begins its journey to carry a KFC chicken sandwich to the stratosphere.

World View's high-altitude balloons are designed to operate in a region of the atmosphere that is too high for most commercial airliners, but too low for satellites. The Stratollite vehicles are expected to be able to reach altitudes of up to 28.5 miles or about 150,000 feet (45.8 kilometers), which means they would remain below the Karman line; at 62 miles (100 km) above the Earth, this line is considered the boundary of "space."

The company has said it plans to use these balloons for scientific endeavors such as Earth imaging, weather monitoring and even astronomical observations. In addition, World View has announced plans to make balloons that can carry humans into the stratosphere as part of scientific missions or fornear-space tourism.

World View prepared to loft a Kentucky Fried Chicken Zinger sandwich into space the morning of June 29.

While neither KFC nor World View has said exactly how much KFC paid for the flight, World View representatives said that the advertising campaign covered most of the cost of the test flight.

The launch was originally scheduled for June 21, but was delayed due to weather.

Editor's Note: This article previously stated that the World View balloon launched from Tuscon, Arizona; it launched from Page, Arizona.

Follow us@Spacedotcom,FacebookandGoogle+. Original article onSpace.com.

See the article here:

Chicken Sandwich Takes One Giant Leap for Food-Kind - Space.com

Want to get rid of space trash? This gecko-inspired robot may do the trick – The Verge

Geckos, some of natures most skilled climbers, may hold the key to cleaning up the enormous amount of debris clogging up the space around Earth. Scientists at NASA and Stanford have developed a prototype robot that can grip objects in space, the same way a gecko sticks to walls. Such a robot could be a critical tool for grabbing and relocating space trash, helping to clean up Earth orbit and make it much safer for space travel.

The robot capitalizes on the same concept that geckos use to climb. The animals feet arent actually sticky; theyre covered in thousands of microscopic hairs that, together, act like a flexible adhesive. To imitate gecko feet, the robot has special pads outfitted with thousands of tiny silicone rubber hairs, which are 10 times smaller than the hairs on your head. This allows the robot to use the same forces to grab simply by placing its pads on an objects surface.

Gripping objects in space the same way a gecko sticks to walls

And just like a gecko, the grip can easily be turned on and off. The hairs on a geckos feet are tilted so that the lizard must place its foot at a certain angle in order to stick. It can then simply remove its foot by pulling in a different direction. The hairs on the robot also have a tilt, so the gripper can easily remove itself from an attached object by pulling away in a different direction.

This kind of sticking technique could be crucial for getting ahold of unruly space trash. Much of this junk includes out-of-commission satellites or rocket parts that have run out of fuel, all moving at thousands of miles per hour in orbit. These objects are often spinning or moving erratically, and their surfaces can be relatively smooth and hard to grasp. But the gecko gripper, described today in Science Robotics, doesnt need a handle to grab any surface will do. Its a new way to handle these non cooperative pieces of garbage, Aaron Parness, a robotics engineer at NASAs Jet Propulsion Laboratory who helped create the technology, tells The Verge.

Space debris threatens future space travel. Hundreds of thousands of pieces of abandoned space hardware zoom around the planet. That makes Earth orbit very crowded, and it clogs up valuable real estate. For instance, areas over major cities are prime places to put communications satellites. But if theres a piece of garbage in that position, its a very expensive piece of garbage there, says Parness.

Space trash is dangerous, too. Every now and then, the International Space Station has to change its position in orbit to avoid collisions with debris. But as the amount of junk grows, the probability of in-space collisions increases, and that leads to even more debris. That happened in 2009, when a Soviet-era satellite collided with one owned by the US company Iridium, creating thousands of pieces of debris. If enough of these collisions occur, eventually Earth orbit will be filled with so much junk that we wont be able to safely go into space anymore.

There are regulations in place to make sure that the stuff we put up must come down. Satellite operators have to dispose of out-of-service vehicles, either by burning these objects in Earths atmosphere or by putting them in a higher orbit called a graveyard orbit where they wont get in the way of functioning satellites. But these regulations werent in place when satellites were being launched throughout the 60s, 70s, and 80s, so theres a lot of old trash to watch out for.

If you want to grab something in space, almost nothing else works.

People have come up with innovative ways to take out the trash, such as burning hardware up with lasers. But grabbing this junk hasnt been an option. Space is a vacuum, so suction cups dont work; most trash isnt magnetic, so magnets wont help; and the extreme temperatures mean most glues wont work either, says Mark Cutkosky, an engineering professor at Stanford and one of the authors on the study, tells The Verge. If you want to grab something in space, almost nothing else works besides the gecko grip, says Cutkosky.

Geckos grips are unusual: the tiny hairs on their feet can get incredibly close to an objects surface nanoscale distances apart. And thats the key, says Cutkosky. You need to have really intimate proximity. This allows the atoms in the hairs to mingle with the atoms on a surface. The electrons of these atoms actually sync up in such a way that they cause an attraction between molecules. The force of each hair adds up, creating a strong overall attraction over the entire foot.

The feet or pads of the robotic gripper work the exact same way. The silicone rubber hairs are a fifth of the diameter of a human hair at 20 microns; theyre shorter than the width of a human hair, too, at just 60 microns tall. (A human hair is roughly 100 microns in diameter.) The robot is also designed to turn off its stickiness, just like the lizard. Motors inside pull the pads in the direction needed to get a grip. When the gripper approaches a surface, the motors make tendons inside the robot tighten, causing the hairy pads to move together in the right direction to stick. Then, when the robot needs to let go, the motors loosen the tendons, moving the pads in the opposite direction for an easy release.

The silicone rubber hairs are a fifth of the diameter of a human hair

This gripping technique has already been tested in space. Little strips of the hairs, called Gecko Grippers, were sent to the ISS in 2016 to see how well they worked in microgravity. But the team wanted to see how a robot, with the special motorized movement, fared in zero-g as well. So they took a gripping robot on a plane that simulates zero gravity nicknamed the Vomit Comet. The plane does parabolas in the sky to create short periods of weightlessness. Aboard the Vomit Comet, Parness used the robot to grip different types of shapes you might find in space, such as a sphere, a cube, and a cylinder.

Jiang et al., Sci. Robot. 2, eaan4545 (2017)

The motorized gripper worked just fine in zero-g sometimes even better than when gravity was in play. And when it came time to release the objects it had grabbed, the robot did so effortlessly. Nothing happens when he lets go, says Cutkosky. It doesnt jerk the object, and that was the key requirement. Its an absolutely smooth, effortless detachment.

Building on their success, the team is now hoping to test out the robots abilities in space. Earth orbit gets incredibly cold, and the researchers will need to build a new robot that can withstand such an unwelcoming environment. Plus, they need to prove that the adhesive technique can work just as well at much colder temperatures.

But if the robot does hold up, the team envisions two types of vehicles that could be used to clear up space debris in the future. One design is a large 2,000-pound satellite, equipped with a gripper that moves through space grabbing and relocating debris either to the graveyard orbit or so that it eventually burns up in the atmosphere. Such a vehicle wouldnt be able to clean up all the trash, but it could target either the most dangerous junk or the pieces lurking in valuable places in orbit. The other option is to create a tiny satellite, no more than a couple of pounds, that travels to one piece of debris and removes it from orbit. The vehicle wouldnt last for very long since it wouldnt have much fuel but the style is much cheaper to build and fly.

If the gecko didnt exist, humans would never have come up with this idea.

There even other applications beyond clearing up space debris. A gripping robot could be a valuable asset on board the ISS, and it could help on the outside of the ship for repairs and inspection. That could potentially cut down the number of dangerous and time-consuming spacewalks astronauts have to do.

No matter what the robot is used for, Parness says most of the design credit goes to the gecko. If the gecko didnt exist, humans would never have come up with this idea, says Parness. Its not an intuitive thing, we would never have invented it if it werent for the biological example.

Go here to read the rest:

Want to get rid of space trash? This gecko-inspired robot may do the trick - The Verge

Space travel laws need to balance ‘competing interests’; Experts weigh in – Legal News Line

WASHINGTON (Legal Newsline) - How does one establish proper policy and regulation without stymying innovation in the space travel industry? Thats a question scientists, legal experts and lawmakers from around the world have been working to answer since the 1960s.

The Outer Space Treaty, the primary source of international space law, was ratified two years before the Apollo 11 astronauts walked on the moon. It requires that countries be responsible for national space activities involving both governmental and non-governmental entities and holds them liable for any and all damage that results from those activities.

Joanne Gabrynowicz, aninternationally recognized space law expert and editor-in-chief emerita of theJournal of Space Law,contends that the Outer Space Treaty includes an even more significant principle a strict prohibition on placing nuclear weapons or other weapons of mass destruction in space.

The Outer Space Treaty is one of the most important treaties of the 20th century, because for 50 years, we have had a successful ban on those weapons in space, she said.

Dr. Frans von der Dunk, a professor of space law at the University of Nebraska College of Law, explains that international space treaties, including the 1967 Outer Space Treaty, as well as the 1972 Convention on International Liability for Damage Caused by Space Objects and 1975 Convention on Registration of Objects Launched into Outer Space, were drafted during the Cold War era with governmental space activities in mind.

While he says the treaties are in many ways insufficiently precise or open to deviating interpretations, they form the legal foundation for commercial spaceflight. A number of countries have drafted their own national space laws to fulfill treaty obligations and exercise some control over private companies that get involved in space activities.

Henry Hertzfeld, a professor of space policy and international affairs at George Washington University, agrees that space treaties ratified in the 1960s and 1970s reflect both the era and international compromises.

So, are they perfect for commercial operations in space? he said. No, theyre not, but were able to do the commercial and private sector stuff anyway because they dont prohibit it and the United States in particular has encouraged it."

Von der Dunk contends that the United States has the most extended legal regime, with the Federal Aviation Administration licensing space launches, Federal Communications Commission satellite communications and National Oceanic and Atmospheric Administration remote sensing operations.

The FAAs Office of Commercial Space Transportation licenses commercial space transportation activities in accordance with theCommercial Space Launch Act. Enacted in 1984, this law permitted the private sector to get involved in space activities and develop commercial launch vehicles, orbital satellites, and operate private launch sites and services.

The Commercial Space Launch Amendments Act of 2004 built on this law and instituted several regulations, including a mandate that companies conducting commercial spaceflight operations ensure that participants are informed of the risks associated with those operations. Companies must obtain written consent from spaceflight participants that demonstrates acceptance of the risks.

The law also introduced a learning period to prevent the FAA from imposing stringent safety regulations that could potentially stifle the growing industry.

The most recent update to commercial spaceflight policy came in the Commercial Space Launch Competitiveness Act in 2015. In addition to extending companies learning period to 2023, the law permits companies and the government to continue sharing the risks of space launch until 2025.

Gabrynowicz contends that U.S. space law has developed in tandem with spaceflight technology. She says the newer laws the Commercial Space LaunchCompetitiveness Act, theNational Aeronautics and Space AdministrationTransition Authorization Act of 2017 and a pending bill known as the American Space Commerce Free EnterpriseAct of 2017 dont actually help regulate national space activities.

Overall, these laws and bills are more politics than law and contain little substance, she said. They have a lot of technical legal language, like sense of Congress provisions that do not create law.

In all, they are intended to appear like authentic law when, in reality, they embody a great deal of legal uncertainty.

Hertzfeld points out that the industry needs policies that address for-profit operations in space, particularly activities that will be managed or operated by the private sector. Until now, he says, most private sector activities have been narrow, but that could change as companies become more involved with satellites and in spaceflight.

How do you deal with property rights in space? he said. Ownership of these natural resources, mineral resources, up there? How do you deal with approaching satellites that are perhaps owned by someone else, particularly if its another nations satellite? How do you deal with debris that could cause accidents?

There are lots and lots of questions in how you do this internationally, because other nations are involved. These are the issues that are not clearly defined right now.

Von der Dunk adds that there are still many countries that have no, or only a limited, national space law program. As a result, he says, in the implementation of the Outer Space Treaty, a divergence has grown that has led to gaps, inconsistencies and overlaps in domestic oversight.

Ideally, at the international level it would be good to have some form of harmonization at least of the approaches, noting that of course every sovereign state may have some individual idiosyncratic elements to deal with, but that idea has never moved beyond the stage of academic discussion, von der Dunk said. Sovereign states are not willing to comply with any serious effort to make this happen.

Von der Dunk says that those in the space industry can implement good laws without stunting innovation by balancing two competing interests regulating ahead of the curve to protect safety, security and international peace and cooperation, and regulating as closely behind the curve as possible once a number of private manned flights have demonstrated specific risks and threats.

As far as I can see, the FAA in particular does a really great job in trying to balance those two sometimes contradictory interests, but it is after all charged by Congress to both regulate and stimulate, he said.

More here:

Space travel laws need to balance 'competing interests'; Experts weigh in - Legal News Line

Tri-D Dynamics Aspires to Print Rocket Components for New Space Age – Xconomy

In tech circles, amid the chatter about terrestrial innovations such as artificial intelligence, machine learning, and genomics, theres excitement building around another important emerging sector: private space travel.

Teslas Elon Musk, Amazons Jeff Bezos, Virgins Richard Branson, and Microsoft co-founder Paul Allen all have private space ventures underway. NASA is once again ramping up its efforts, launching a rocket this morning that lit up the pre-dawn sky with colorful tracers. Although were nowhere near 1960s-space-race levels of enthusiasm in the U.S., its clear that our titans of digital industry, at least, see a lot of opportunity in expanding the reach of business beyond the Earth.

Tri-D Dynamics, a startup launched from the Purdue Foundry accelerator earlier this year, is preparing for the coming era of private space flight. The company wants to commercialize low-cost rocket engines that can be fabricated quickly through 3D printing and other additive manufacturing processes.

We want to be contract manufacturers for rocket engine components, says Alex Finch, Tri-Ds co-founder. Finch says the companys process is proprietary, but doesnt have the same constraints on component size or scalability that traditional 3D metal printing methods do. Our technology tries to move past those constraints, he adds.

Finch says his companys timing is perfect, as he sees the aerospace industry transitioning from being the provenance of government entities to being dominated by private companies, where the potential for profits is higher. We anticipate a big spike in demand, he says. There are a lot of rocket and satellite companies that are bringing value to commercial customers, and thats driving more demand.

If private space travel becomes more common, as its predicted to, Finch says an infrastructure will be required, and it will be rockets that ferry the necessary equipment to space. Youve got Branson with Virgin Galactic, Musk with SpaceX, and Bezos with Blue Origin, and then there are a dozen others in the U.S. alone, he points out. Globally, there are even more. We see the industry primed for exponential growth in 10 to 20 years.

In 2015, rocket manufacturing in the U.S. was a $2 billion industry, Finch says. Tri-D has done market research that shows demand for rocket engines will double by 2020.

According to Finch, Tri-D Dynamics was born out of research conducted at Purdue and University of California, San Diego, and has been five years in the making. The four-person company is based in Los Angeles, CA, but hopes to eventually locate its manufacturing operation in Indiana. Purdue is currently in the process of building a new aerospace manufacturing center, Finch says, which could provide a future pipeline of talent.

So far, Tri-D has relied on government grants to support itself as it develops its research from concept to commercialization, but Finch is also in the process of seeking venture backing. While many other companies are innovating in the broad category of 3D printing, Finch says none that hes aware of compete directly with Tri-Ds technology.

Some of the technology were using is already known, but we do have a patent pending, he says.

The startup also signed its first customer in the spring. Tri-D will take its customers engine design and create a full-scale prototype using its 3D printing technology by February. Finch says once the rocket engine printing process has been perfected, the company wants to explore other verticals, such as manufacturing jet engines or large-scale equipment for the oil and gas or nuclear industries.

Sarah Schmid Stevenson is the editor of Xconomy Detroit/Ann Arbor. You can reach her at 313-570-9823 or sschmid@xconomy.com.

Original post:

Tri-D Dynamics Aspires to Print Rocket Components for New Space Age - Xconomy

Why the Future of Stuff Is Having More and Owning Less – Singularity Hub

If youre one of the many people whos embraced the sharing economy, youve probably stayed in someone elses apartment or ridden in someone elses car. Maybe youve also done away with your clutter of DVDs, books, or CDs, since you can watch movies on Netflix, read books on Kindle, and hear music on Pandora.

The concept of having more while owning less sounds paradoxical, but thats exactly the scenario were finding ourselves in. Technology is enabling us to move away from ownership and towards an economy based on sharing and subscriptions. Platforms like Airbnb and Lyft or Uber connect renters and riders to landlords and drivers, and digitization means all kinds of media can be stored, streamed, or downloaded in seconds.

But where does it end? Are there things well always want to own, and if so, what are they?

In a new video from Big Think, author and WIRED founding executive editor Kevin Kelly explores the limits of what he calls the subscription economy and asks, Is this the end of owning stuff?

Kelly points out how easy its become to make things like games or books intangible. These things have gone from being physical products to information on a screen.

If we can deliver these intangibles anytime, anywhere, to anybody, that instant aspect of them means we dont have to own them anymore, Kelly says.

And its not just intangibles we dont need to own. If you can summon a car to pick you up within minutes, why own one, especially when owning means storing, cleaning, maintaining, and insuring? Subscribing, Kelly says, gives you all the benefits of owning without any of the liabilities.

But is there a limit to what people will be willing to rent?

Ownership isnt always just about practicality or convenience. Its also about comfort, familiarity, and status, tooand these arent as easy to digitize or subscribe to.

Kelly uses clothes as an example of something else we may soon subscribe to. Your body would be scanned so youd know the clothes would fit, then theyd get delivered to you, youd wear them once, send them back, and theyd be cleaned and sent to the next person.

On the one hand, it would be nice not to lug a suitcase of clothes and personal items along when you travel, instead receiving whatever you need at your destination (and leaving it there when you depart).

But what about your old gym shoes that are perfect for long days of walking? Or that t-shirt youve washed so many times it feels like wearing a fluffy cloud? And dont forget about the brand-name suit you saved up for months to buy, and the hat that bears your alma maters namehow will you tell the world who you are without these?

Not to mention, wouldnt wearing the same clothes dozens of other people have worn be kind of, well, gross?

Similar points might be made about items like kitchenware, toys, camping equipment, or really anything thats among the piles and stashes of stuff in our homes today.

We own things because its convenient, but also because its sentimentalmaybe it would be nice to rent a turkey roaster once a year instead of having it take up space in your cabinet for 364 days, but its also nice to use the one Aunt Sue gifted you from your wedding registry.

For better or worse, ownership also serves as a status symbol. If you can afford expensive cars and luxury-brand clothing and accessories, you may want to own them even if theyre not practical or convenient.

The answer to Kellys question, then, is a bit more nuanced than yes or no. This is the beginning of being able to significantly reduce what we own while retaining access to more than we had before. Its a phenomenon that will spread to new classes of things with varying speed.

How quickly we shift from owning to subscribing will be influenced by price and convenience, but the personal and cultural aspects of ownership will likely provide a counterbalance. I, for one, will always love my comfy old t-shirts and bulky paper books.

That said, preferences tend to change over time and evolve along with cultural norms. As evidenced by Airbnbs explosive growth in a relatively short period of time, many people have readily gone from thinking of their homes as private space to using them as money-makers. Similarly, though we may not be crazy about the idea of sharing clothes right now, the next generation could be as comfortable with it as we are sleeping in other peoples beds.

Stock Media provided by garloon/ Pond5

Go here to see the original:

Why the Future of Stuff Is Having More and Owning Less - Singularity Hub

‘Biological Teleportation’ Edges Closer With Craig Venter’s Digital-to-Biological Converter – Singularity Hub

The year is 2030. In a high-security containment lab, scientists gathered around a towering machine, eagerly awaiting the first look at a newly discovered bacterium on Mars.

With a series of beeps, the machinea digital-to-biological converter, or DBCsignaled that it had successfully received the bacteriums digitized genomic file. Using a chemical cocktail comprised of the building blocks of DNA, it whirled into action, automatically reconstructing the alien organisms genes letter-by-letter.

Within a day, scientists had an exact replica of the Martian bacterium.

To Craig Venter, the genetics maverick who created the first synthetic life form in 2016, beaming aliens back to recreate on Earth may sound like science fiction, but is potentially real.

Recently, working with Daniel Gibson, vice president of DNA technology at Synthetic Genomics, Venter published a prototype DBC capable of downloading digitized DNA instructions and synthesizing biomolecules from scratch.

Not only did the futuristic machine pump out functional bits of DNA, vaccines, and proteins, it also automatically synthesized viral particles from scratch.

Teleporting alien life to Earth is just one role Venter envisions for the DBC. Working the other way, we may be able to send Earths extremophile bacteria to a printer on Mars. If genetically enhanced to pump out oxygen, the bacteria may slowly change the Martian landscape, making it more habitable to humans before we ever set foot on the Red Planet.

More close to home, the DBC could allow instant, on-demand access to life-saving medicine or vaccines during an outbreak or finally enable access to personalized medicine.

We are excited by the commercial prospects of this revolutionary tool, as we believe the DBC represents a major leap forward in advancing new vaccines and biologics, says Venter in a press release.

At the basis of Venters foray into biological teleportation is the idea that all life formsat least on Earthare essentially DNA software systems. DNA directs and creates the more tangible biological hardware made of proteins, cells, and tissues.

Because DNA contains all the necessary information to boot up a life form, by hacking its code and writing our own, we now have the power to create living organisms never before seen on Earth.

Back in 2010, Venter inserted a bacterial genome completely synthesized from chemicals in the lab into a single-cell recipient. The synthetic genome booted up the living bacterium, allowing it to replicate into a large colony of artificial organisms. Six years later, his team ventured even further into the realm of science fiction, creating a new bacteria species with just 437 genesthe absolute known minimum amount of genetic code needed to support life.

These studies and others clearly show we now have a new set of tools that allow scientists to manufacture new living species to join our planets inventory of life. But why stop there? If life is nothing but code that can be packaged, emailed, downloaded, and copied, why not use the same technology to transmit life?

The DBC is Venters attempt to transfer and manufacture life.

Standing at eight feet long and six feet tall, the machine is a Frankenstein beast of mechanical blocks and wires splayed out across a double-deck table. Were working on the portability of the machine using new technologies such as microfluidic chips and microarrays, explained the authors.

Equipped with an ethernet hub, the DBC downloads DNA files from the internet and prints the code using the four chemical bases of DNAadenosine, guanine, thymine, and cytosine (A, G, T, C).

Its packaging complex biology that each of our tiny cells do remarkably well at a much, much smaller scale, explains Venter.

While automated DNA printers have already hit the market, the DBC takes it one step further. The machine is capable of building proteins from the genetic code (printing biological hardware, so to speak), bringing it one step closer to building living cells from scratch.

At the heart of the system is Archetype, proprietary software that optimally breaks down the input DNA sequence into more manageable short sequences to synthesize in parallel. This massively increases efficiency and reduces sequencing errors that increase with longer DNA strands.

Once assembled, the machine scans the strands for any errors before pasting the bits back into complete DNA assembles. From there, a series of robotic arms transfer the DNA from module to module, automatically adding reagents that turn the synthetic genes into functional proteins.

In one proof-of-concept study, the machine pumped out green fluorescent protein, an algae protein that often serves as an experimental canary in the lab. Following the DBC run, the resulting product glowed bright green as expected, and subsequent analysis found that over 70 percent of all synthesized molecules were error-free.

While impressive, the team acknowledges that future models need to do better.

All it takes is one DNA base to be incorrect for a protein not to work, or a therapeutic to not do what its supposed to, or for a cell to not be functional, warns Gibson.

In another experiment, the DBC successfully produced functional flu viral particles, RNA vaccines, and bacteriophagesviruses that infect bacteria that can be used to combat infections or even cancer.

Thats huge. If there is a pandemic, everyone around you is dying and you cannot go outdoors, you can download the vaccine in a couple of seconds from the internet, says Venter. A machine like this in hospitals, homes, and remote areas could revolutionize medicine.

Venter also has his eye on personalized medicine. In the future, if you have an infection you get its genome sequenced in minutes, he says. The doctor could then cross-reference your bug with an online database, download and print the available phage treatments in office and send you on your way.

Venters ambition doesnt stop there. He imagines combining the DBC with technologies from his synthetic organisms to construct a blank slate recipient cell capable of producing food, oxygen, and fuelthe perfect workhorse to send around the world or into space.

In theory, the cell would be capable of receiving any synthetic genome designed to produce life-supporting molecules. These cells have to be engineered, says Venter, but stresses that it can be done.

Having a DBC on board means a crew hurtlingthrough space would no longer rely on supply ship rendezvousand well never have a real life Mark Watney starved and stranded on Mars.

But thats looking way far ahead.

According to Gibson, before we get too distracted with fanciful thoughts of space, a lot more work still has to be done. For one, the DBC needs to shrink down to a more manageable size. For another, current DNA synthesis technologies are incredibly inefficient and wastefulabout 99.999 percent of the raw materials go to waste, he saysa problem further magnified as the team moves on to larger DNA constructs.

These arent small challenges, but the DBC shows that biological teleportation for biological materials is feasible. So why not aim high?

Mine is not a fantasy look at the future, says Venter. The goal isnt to imagine this stuff. We are the scientists actually doing this.

Stock Media provided by Science_Video / Pond5

Go here to read the rest:

'Biological Teleportation' Edges Closer With Craig Venter's Digital-to-Biological Converter - Singularity Hub

Nam June Paik Art Center – E-Flux

International Symposium Gift of Nam June Paik 9 Coevolution: Cybernetics to Posthuman Saturdays, July 8, 15, 22, 29, 2017, 15pm

Nam June Paik Art Center 10 Paiknamjune-ro, Giheung-gu Yongin-si, Gyeonggi-do 17068 Korea Hours: TuesdaySunday 10am6pm

press@njpartcenter.kr

njpac-en.ggcf.kr Facebook / Instagram / Twitter

Hosted and organized by Nam June Paik Art Center, Gyeonggi Cultural Foundation

Nam June Paik defined cybernetics as various relationships between humans and machines, art and machines, art and technologies, humans and art and even among diverse arts (artists). He understood that it would generate varying combinations out of these relationships. Nam June Paik put his ideas about cybernetics into artistic practices: he performed Robot Opera with robots he himself had made and manipulated, expressing simply and playfully the complicated relationship between humans and machines.

Cybernetics as a discipline was first introduced by Norbert Wiener, as he attempted to explain the regulative relationship between humans and machines. When a number of scholars gathered and discussed on the theme at Macy Conference, however, cybernetics dynamically developed into a emerging epistemological concept. Nam June Paiks theoretical ideas and artistic practices correspond to (or lead ahead) the few steps of the radical development of cybernetics achieved throughout history: the first wave cybernetics, which was at the level of mechanic feedback, and the second wave cybernetics, which characterizes as reflexity and self-generation and the third wave cybernetics, at the center of which is emergence, are all relevant. These steps express a posthuman evolutional point of view on how the boundary between humans and machines is deconstructed.

Our symposium looks into a contemporary approach to the phased developmental history of "cybernetics"and at the same time analyzes Nam June Paiks works on machines and art. We expect it will develop into a dynamic and contemporary discursive space where presenters from diverse background freely discuss in small spaces. We hope that each participant exists as a subjective observer and there will be sensitive and exciting reactions within that space.

Program

July 8 12:30pm "Sudden Unintended Accelerationas a Psychosis of Machine" Youngjun Lee(Machine Critic, Professor ofKaywon Universityof Art & Design)

2:304pm "Cybernetics and Later,The History of the Integration and Simulation for Processing Human Elements in Circuits" Kyuheun Ko(Adjunct Professorof Sung Kyun Kwan University)

45pm Discussion

July 15 12:30pm "Cybernetics and Cyborg: Some Philosophical Questions" Jinkyoung Lee(Professor of Seoul National University of Science and Technology)

2:304pm "Cognitive Ecological Outline of the Strategy for Social Solidarity in the Age of Artificial Intelligence" Kwanghyun Sim(Professor of School of Visual Arts,Korea National University of Art)

45pm Discussion

July 22 12:30pm "Cybernetic Lyricism: Gregory Bateson,Nam June Paik, and the Mind as Conjunctive" Seongeun Kim(DPhil, Leeum,Samsung Museum of Art)

2:304pm Artist Talk: Taeyeun Kim,pela Petri

45pm Discussion

July 29 12:30pm "Transductive Ensemble of Nature, Human, and Technical Objects: The TechnoAesthetics ofNam June Paik and Posthuman" Jaehee Kim (Professor of the Ewha Institute for the Humanities (EIH),Ewha Womans University)

2:304pm "Inside Out, Outside In: Technical Media as Exteriorizations of Cognition and the Art Installationsof Nam June Paik" N. Katherine Hayles(Professor of Literature at Duke University)

45pm Discussion

Read more here:

Nam June Paik Art Center - E-Flux

Inaugural Issues of the Journal of Posthuman Studies Now Available! – Institute for Ethics and Emerging Technologies

Now, Vol. 1, No. 1, 2017 of the newly established Journal of Posthuman Studies (Penn State University Press) is available via jstor: http://www.jstor.org/stable/10.5325/jpoststud.1.1.issue-1 It is a ground-breaking issue with amazing contributors! It is already possible to submit your work for consideration for future issues by accessing this link: http://www.psupress.org/Journals/jnls_JPHS.html The new journal is being edited by IEET Fellow Stefan Lorenz Sorgner and the Executive Director of the IEET James J. Hughes. The Editorial Board includes further members of the IEET as well as many other distinguished thinkers and artists: http://www.psupress.org/Journals/jnls_JPHS.html

The launch of this new journal as well as this new area of studies will officially be celebrated during the 9th Beyond Humanism Conference (Topic: Posthuman Studies) which will take place at John Cabot University in Rome from the 19th until the 22nd of July 2017: http://beyondhumanism.org/ The tentative conference program is already available: http://beyondhumanism.org/wp-content/uploads/2016/02/Preliminary-schedule-5.pdf It will be a massive event with more than 100 speakers and participants and many thought leaders from a great variety of traditions and disciplines!!!!

Read the original post:

Inaugural Issues of the Journal of Posthuman Studies Now Available! - Institute for Ethics and Emerging Technologies

Waterways in Ascension, Livingston reopened Tuesday evening – The Advocate

GONZALES All inland waterways in Ascension and Livingston parishes were reopened to recreational boat traffic at 6 p.m. Tuesday, five days after they were closed, Ascension officials said.

GONZALES The Amite River and all other inland waterways in Ascension and Livingston parish

Tropical Storm Cindy last week dropped rain while its winds pushed surge up waterways throughout the Lake Pontchartrain Basin, including those tied to Lake Maurepas, like the Amite River and Amite River Diversion Canal.

Local leaders closed the waterways to keep boat wakes from pushing high water into homes and to prevent boats from running into debris washed out from last week's storms.

Livingston and Ascension share the Amite, but other rivers and bayous also course throughout both parishes.

Ascension homeland security officials announced the planned waterway reopenings on Facebook Tuesday.

Blind River, which St. James Parish officials also closed last week due to high water, reopened Monday, Ascension officials said in the post.

Follow David J. Mitchell on Twitter, @NewsieDave.

Read the original:

Waterways in Ascension, Livingston reopened Tuesday evening - The Advocate

Ascension Parish Civil Court Cases for June 12-16, 2017 – The Advocate

Court cases filed in Ascension Parish between June 12-16:

Emily England v. Progressive Paloverde Insurance Com. and Keren King, damages.

University of Louisiana System Board and Louisiana State University v. Ashley Nicole Hawkins, promissory note.

Portfolio Recovery Associates LLC v. Mary E. Thornhill, open account.

TD Bank USA Na v. Courtnie B. White, open account.

TD Bank USA Na v. Jacie B. Cedotal, open account.

Portfolio Recovery Associates LLC v. Dana Brown, open account.

Gulfcoast Pharmaceutical Specialty LLC v. United Medical Rehab Hospital Gonzales, United Medical Healthwest New Orleans and United Medical Healthcare Inc, contract.

Mark Carline v. Nitrogen Fertilizer LP PCS and PCS Nitorgen Fertilizer Operation, Inc., damages.

Curtis Mire v. Safeco Insurance Co. Oregon, Louisiana Farm Bureau Casualty Insurance Co and Tara Jeanise, damages.

Louisiana Federal Credit Union v. Milton A. Brown, promissory note.

PNC Bank National Association v. Michael B. Brady, executory process.

Red River Bank v. Eddie Raymond Pfeiffer, promissory note.

Heather Waguespack v. Louisiana State of Department Environmental, Chuck Carr Brown and Nathan Prince, damages.

Kimberly Sanchez v. State Farm Mutual Automobile Insurance Co. and Laura Gilliland, damages.

Ronald George Wood and Karen Elaine Wood v. Davies Construction LLC, breach of contract.

Shawndel Lilly v. Leslie Zito and State Farm Mutual Automobile Co., damages.

Pearce Pump Supply Inc. v. Blackwell Aggregates Inc. and Mass P. Blackwell Jr., contract.

Neighbors Federal Credit Union v. Phillip E. Lindstrom, executory judgment.

Cavalry Spv I LLC and Capital One Bank USA NA v. Randy Pebworth, monies due.

Essential Federal Credit Union Fka and Dow Louisiana Federal Credit Union v. Ronald Thomas, promissory note.

Wells Fargo Bank v. Patrick Jerome Adams Sr., executory process.

Wells Fargo Bank NA v. Jordan Matthew Julien, executory process.

Todd Andrew Atkins v. Lifeng Zheng, redhibition.

Ditech Financial LLC v. Erica R. Fazzio, executory process.

Neighbors Federal Credit Union v. Joseph S. Barnes, executory judgment.

Money Source Inc v. Damon Jamar Hausey, Cortne L. Hausey AKACortne Lashae S. Hausey, executory process.

Amos Hamilton Jr. v. Brenda Goodlow, Debra Goodlow and Palmer Goodlow, injunction.

Jp Morgan Mortgage Acquisition Corp v. Donna M. Weber aka Donna M. Arnold and Kyle Elliott Arnold, executory process.

TD Bank USA Na v. Edward C. Hayes Jr., open account.

TD Bank USA Na and Target National Bank v. Shirley West, open account.

Discover Bank v. Chad Vidrine, open account.

Vanderbilt Mortgage and Finance Inc v. Joshua Bleakley, executory process.

Bank of America NA v. Virginia Folse, open account.

Charlotte Sharp v. Geico Casualty Co. and Carly McIntosh, damages.

Fresenius Medical Care Capital City v. Mark West, Ascension Parish Sales and Use Tax Authority, monies due.

Montrell E. Burrell v. Bridgette Burrell, divorce.

Salsman Jessica L. Crawford and Jessica L. Crawford Salsman v. Patrick Ray Salsman, divorce.

Butch Lee Shuff v. Amanda Fonte Shuff, divorce.

Diane Sanchez Buxton v. Buster Buxton, divorce.

Colby Chase Villar v. Erica N. Childs, paternity.

Nydrkia Ursin, state Department of Children and Family Services, v. Taurus Jones, paternity.

Isaac Gibson Jr. v. Brenda Johnson Gibson, divorce.

Hayden John Melancon v. Chelsie Prestridge Melancon, divorce.

Chad Anthony Thibodaux v. Sandra Juracek Thibodaux, divorce.

Brittney Price v. Javonne Carey, divorce.

Office of Community Services v. Lacarla Nicholas, child support.

George Harvey, state Department of Children and Family Services v. Shelley Harvey, child support.

Keelan B. Leslie v. Ellen Rae Weeks Leslie, divorce.

State Department of Children and Family Services v. Lacarla Nicholas, child support.

Succession of Felton Smith

Succession of Dolores Bocage

Succession of Donald Milton McDaniel

Succession of Robert James Edwards

Succession of John Burrows Johnson Sr., Bernie Mae Wescott Johnson

Succession of Marjorie Lee Lambert

Succession of Phyllis Dansby Edney

Succession of Jodi Knichen Spiers

Succession of Eunice Martinez Jenkins AKA Eunice M. Jenkins Templet

Succession of Mary Sibley Sheets

Succession of Henrietta Lee Gaines AKA Hennie Gaines AKA Hannie Gaines

Succession of Joseph Raymond Stam

Go here to read the rest:

Ascension Parish Civil Court Cases for June 12-16, 2017 - The Advocate

Album Review: GOATWHORE Vengeful Ascension – Metal Injection.net

Goatwhore have always distinguished themselves from their fellow New Orleans metal artists by largely eschewing that city's favored sludge template in favor of a unique blend of first wave black metal, hook-laden death metal and, sure, a dash of low-end, Southern-inflected sludge thrown in for added seasoning. Essentially they have a coherent vision that successfully straddles the venn diagram which overlaps most major facets of "extreme" metal. Where they haven't always distinguished themselves is in the songwriting department. They've always had an enduring sound going for them that make them an engaging listen even when they aren't swinging for the fences, from Ben Falgoust's raspy-yet-discernible crowing to Sammy Duet's encyclopedic grasp of catchy riff writing to the airtight interplay between bassist James Harvey and drummer Zach Simmons. But that talent hasn't always translated completely into collections of songs that differentiate themselves between one another.

The relative brevity of each Goatwhore album average length is around 40 minutes does point to a measure of deliberate quality control, yet since 2006's band-defining A Haunting Curse album the quartet have spun their wheels a bit, never dipping below a certain standard of excellence but often struggling to really take their music to the next level. Vengeful Ascension is more of modest progression than a bar-setting effort, but for a band that was already operating at an impressive level of hyper-competency to begin with, gains of any magnitude are welcome.

Vengeful Ascension is a refinement rather than a retooling of the Goatwhore sound there's nothing here we haven't heard out of these guys before, but the album shows a lot more versatility than the characterless, pedal-to-the-floor blur that has characterized large chunks of their last several albums. It's a like a mosh pit that opens at the beginning of a set and never closes: exhilarating at first but merely exhausting by the time it all wraps up. A little variety in tempo proves to be just what the doc ordered here. "Forsaken" fades in gradually on a tribal drum pattern before exploding into the high tempo onslaught we've come to expect out of this band, but by the time the title song kicks in at track three the tempo drops what you might call a brisk doom pace, with shards of ringing minor key chords that vaguely recall old 90's industrial.

"Where the Sun Is Silent" expands the band's repertoire with a blackened doom showcase that offers a moody respite at the dead center of an often ferocious 41 minutes. Many of the best of those ferocious moments come surprisingly late in the album, beginning near the halfway mark with the brilliantly catchy "Chaos Arcane", leapfrogging the aforementioned "Where the Sun Is Silent" to return with Sammy Duet's Bathory-reminiscent riffing on "Drowned in Grim Rebirth" before landing on arguably the album's best song, the old school death metal banger "Mankind Will Have No Mercy". Throughout, Duet's sorcery-like conjuration of perfect riffs is the album's not-so-secret weapon, but with this track he really outdoes himself. Ostensibly a tribute to Bolt Thrower (per the press release), the tune is not only an admirable tribute to the UK legends, but also looks back successfully to the crunchy, mid-tempo 80's thrash bands that influenced Bolt Thrower as well.

Vengeful Ascension is the high water mark that Goatwhore have set for themselves thus far, although that may not be readily apparent upon the first or second listen. With repeated familiarity, though, the album's assets are gradually revealed, a newly expansive tool set that should greatly assist in avoiding any wheel spinning come the next album or maybe several.

Score: 9/10

What do you think? Leave a Comment

Read more:

Album Review: GOATWHORE Vengeful Ascension - Metal Injection.net

No need to fear Artificial Intelligence – Livemint – Livemint

Love it or fear it. Call it useful or dismiss it as plain hype. Whatever your stand is, Artificial Intelligence, or AI, will remain the overarching theme of the digital story that individuals and companies will be discussing for quite some time to come.

It is important, however, to understand the nature of AIwhat it can and cannot do.

Unfortunately, individuals and companies often fail to understand this.

For instance, most of the AI we see around caters to narrow specific areas, and hence are categorised as weak AI. Examples include most of the AI chatbots, AI personal assistants and smart home assistants that we see, including Apples Siri, Microsofts Cortana, Googles Allo, Amazons Alexa or Echo and Googles Home.

Driverless cars and trucks, however impressive they sound, are still higher manifestations of weak AI.

In other words, weak AI lacks human consciousness. Moreover, though we talk about the use of artificial neural networks (ANNs) in deep learninga subset of machine learningANNs do not behave like the human brain. They are loosely modelled on the human brain.

As an example, just because a plane flies in the air, you do not call it a bird. Yet, we are comfortable with the idea that a plane is not a bird and we fly across the world in planes.

Why, then, do we fear AI? Part of the reason is that most of us confuse weak AI with strong AI. Machines with strong AI will have a brain as powerful as the human brain.

Such machines will be able to teach themselves, learn from others, perceive, emotein other words, do everything that human beings do and more. Its the more aspect that we fear most.

Strong AIalso called true intelligence or artificial general intelligence (AGI)is still a far way off.

Some use the term Artificial Superintelligence (ASI) to describe a system with the capabilities of an AGI, without the physical limitations of humans, that would learn and improve far beyond human level.

Many people, including experts, fear that if strong AI becomes a reality, AI may become more intelligent than humans. When this will happen is anyones guess.

Till then, we have our work cut out to figure how we can make the best use of AI in our lives and companies.

The Accenture Technology Vision 2017 report, for instance, points out that AI is the new user interface (UI) since AI is making every interface both simple and smart. In this edition of Mints Technology Quarterly, we also have experts from Boston Consulting Group talking about value creation in digital, and other experts discussing the path from self-healing grids to self-healing factories.

This edition also features articles on the transformative power of genome editing, and how smart cars are evolving.

Your feedback, as usual, will help us make the forthcoming editions better.

First Published: Wed, Jun 28 2017. 11 18 PM IST

Link:

No need to fear Artificial Intelligence - Livemint - Livemint

Omnia, Speaking About His Future, Says Right Now, Trance is Back. – Dance Music Northwest

Is trance music dead? Once atopicfor discussion, 2016 saw that question finally laid to rest. Trance artists sawincreased bookings, large dedicatedtrance events like Blissin Seattle sprouted out of nowhere, psy-trance became a fad, and more! This year, the genre continues to soar to new heights.Fresh, youngartists are emerging and legends of old, ones who bounced to other genres, have returned home under new aliases. One trance mainstay whos set to have his biggest year yet? Omnia.

Before taking to the Digital Oasis stage last week at Paradiso, the Ukranian DJ/producer shared with us what fans can expect from him this summer, and beyond. Lets just say: trance family, you are definitely in for a treat!

Dont expect from me simple EDM, commercial big room stuff, DJ screaming in the microphone for the whole night, and things like thatits not me.

Contributing to trances resurgence last year, Omnia struck gold with Alien, released that April, and kept the hits coming. His remix of Armin van Buurens Face of Summer, Believe (featuring famed trance vocalist Audrey Gallagher) and All I See Is You (featuring Christian Burns, a legend in his own right), all released toward the end of the year, received massive support and placed on trance charts across the globe. He hasnt stopped since, teaming up with Johnny Rose for Why Do You Run and DRYM for Enigma to kick off 2017.

His Paradiso set saw a slew of new IDs and remixes, somehaving never been played on stage- a funtaste of whats to come.

The whole summer is going to be crazy with the new music from me and Im so happy about that!

Teasing a few more singles to be released in July and August, Omnia adds there are plans for an album to be released next year; in-progress now.

I think we are coming back to the trance roots right now. For some reasons trance music had too much EDM influences afew years ago, but that was just a trend I guess; people get bored of this too fast.

Right now, trance is back.

Original post:

Omnia, Speaking About His Future, Says Right Now, Trance is Back. - Dance Music Northwest

TMS Academy merges with HCLI in Singapore – Human Resources Online

Temasek Management Services (TMS) has announced that TMS Academy, its integrated leadership development arm, and the Human Capital Leadership Institute (HCLI) will mergeeffective tomorrow (1 July 2017).

In a statement to Human Resources, TMS shared that the new organisation will retain the HCLI name and operate as a subsidiary of TMS, with Wong Su-Yen as the CEO.

The new HCLI with the ongoing support of the Singapore Ministry of Manpower (MOM) and the Singapore Economic Development Board (EDB) will offer an expanded portfolio of leadership development programmes for executives, ranging from emerging leaders to company directors.

Dr. Tan Chin Nam, chairman of TMS said, The new organisation launches at an opportune time, with Singapores focus on lifelong learning, upskilling and talent development. With a vibrant network of 35,000 partners and alumni and the synergies of TMS and HCLI coming together, the new HCLI is well positioned to further its mission of building Asian leaders who drive innovation and growth, here in Singapore and beyond.

Sunny Verghese, chairman of HCLIs board of directors added, Our goal is to be the leading centre of excellence for developing executive leadership and impactful knowledge, in, from and for Asia.

Apart from Verghese, directors of the new HCLI board are:

Photo / 123RF

Calling all L&D and corporate training professionals! Do not miss Asias premier conference on learning, training and corporate development strategy, Training & Development Asia. In Hong Kong, Kuala Lumpur, Philippines and Singapore in July/August 2017 Register Now.

In this year's edition of MIHRM's Malaysia HR Awards, KPJ Healthcare, CIMB Group and Scicom are among the top winners. ..

Your weekly update on job movements in HR - featuring changes from Banyan Tree, Socit Gnrale, Cartus, and many more...

Meet the new leadership team and board for the newly-acquired Packet One Networks (P1), including a chief human capital officer. ..

As a result, nearly seven in 10 companies plan to create a leadership strategy in the first six months of 2016...

30% of Asia's 15-30 year-olds look to the Internet of Things as having potential to give rise to peace...

More here:

TMS Academy merges with HCLI in Singapore - Human Resources Online

Posted in Tms

bob’s guide to treasury management systems: How to avoid disruption during TMS implementation – Bobsguide (press release)

So far in the bobs guide to treasury management systems series, weve looked at how organisations can determine whether they need a TMS, the kinds of systems that are available, and what treasury professionals should consider before making their selection. Now its time for the nitty gritty implementation.

As weve covered in previous instalments of the series, the importance of ensuring a new treasury system is properly implemented cannot be understated. Get it wrong and not only might the new software make everyday operations more cumbersome and less efficient, but the treasury team will be driven back to old systems, and the time and resources taken to install the solution will have been wasted.

You might have chosen the right system, but if its mis-implemented, or ill-implemented, then your user wont be able to use it. Theyll go back to the spreadsheet, says Dimos Dimitriadis, partner and founder of consultancy Treasury Technology Associates.

Its a concern shared by many of you when it comes to TMS implementation. In our treasury management systems survey among bobsguide readers, conducted earlier this year, difficulty integrating new solution seamlessly with existing systems emerged as the top concern about implementing a TMS, with 62% respondents selecting it, closely followed by cost, at 58%.

By working closely with the vendor, and a consultancy if necessary, treasury teams can ensure their new system is optimally configured for their everyday operations. But during this transitional period, which calls upon many different players with many different roles, how can treasury teams avoid disruption to their day-to-day operations? The first step is preparation.

How can my treasury team prepare for the TMS implementation process?

Before implementation even begins, treasury teams must organise which personnel are going to be involved, and who will work closest with the vendor during the process. We covered assembling a team in an earlier instalment of this series. The next step is establishing a relationship with the vendor.

Patrick Cannon, head of professional services and customer success for SaaS provider Reval, says that the key to successful implementation is to involve the vendors professional service team early in the pre-sales process. Engagement starts with an understanding and alignment of the clients vision, he says.

Corporate treasury teams need to have better alignment internally as well, he adds. [They need] a clear understanding and commitment to achieving the business goals in a deployment, top to bottom.

Where projects succeed or fail is measured by the organisations clarity of vision and designation of an executive sponsor there needs to be an internal counterpart to the vendor who works in step to achieving value in the relationship.

Mathilde Sanson, chief client officer at cloud treasury solutions provider Kyriba, says that assuming evaluation of the TMS is complete, and that an extensive list of requirements was identified during that stage, the implementation process will be smoother, guided with clear business requirements.

To prepare for a TMS implementation, she says, a treasury team should understand the strategic functions of the organisation that they wish to automate, where in their workflows they would benefit from increased financial controls, security, auditability.

She continues: Having their requirements understood by the implementation consultants will help to ensure the project is completed according to plan.

Cannon suggests a straightforward way of confirming mutual understanding of the project, and what it is expected to deliver: If I were part of a corporate treasury team, I would want professional services to articulate my vision back to me to make sure they understand what I want to achieve, and leave no stone unturned when it comes to functionality and what the system can do.

What are some setbacks we need to be prepared for?

With so many individuals from different teams involved in TMS implementation, and many moving parts in the system itself, its expected to hit a few obstacles on the journey. What should treasury teams expect, and how can they prepare for any setbacks?

Many project risks can be identified during the discovery process and mitigation plans can be made, Sanson says. Good communication and a prepared client-vendor team can resolve and smooth out most bumps on the implementation road.

For Cannon, sticking to project best practices, including open communication, regular status reports, and strong governance, is crucial for keeping the wheels moving. Dont underestimate the commitment to getting this right, he says.

Depending on the complexity of the system, and the nature of the organisation, it can take six, 12, even up to 18 months to fully implement a TMS. Theres a risk the project will lose momentum, that the project will take even longer, that it will be disruptive, and treasury teams could lose enthusiasm.

Sanson, like Cannon, recommends executive sponsorship and regularly scheduled status calls to ensure there is ongoing triage and prioritisation to meet goals.

She continues: A treasury team should expect to have a clearly defined process with key milestones and checkpoints identified to recognise progress and maintain quality controls.

Lars Schroeder, senior engagement manager at consultancy SkySparc, says that working with a consultancy can take some of the load off the treasury team during TMS implementation, particularly when it comes to testing.

We help with implementing the new system, by allowing our clients to learn the new system but without doing all the testing which can be boring for them, he says.

Five tips for avoiding disruption during TMS implementation:

Sanson has five tips for treasury teams looking to minimise disruption during TMS implementation:

Establish your team lead and main point of contact. This person should be able to validate processes against the state requirements, she says.

Ensure the initial discovery phase is a priority for your internal stakeholders. Having all the requirements agreed upon up front will greatly reduce day-to-day disruption.

Communicate frequently and clearly about reaching check points and expected milestones. Ensuring everyone on the treasury team understands what should be done and when will keep the project on track.

Set aside a time in the day that you can dedicate to the implementation. If you do this proactively, your meetings will be predictable and according to your schedule. If you cannot free up your staff from day-to-day roles then an external consultant should be hired to have the project move forward.

Enable your vendors implementation team to become your trusted partner. Not only will this increase productivity, but you will also gain more out of the process.

Schroeder says that the key to avoiding disruption is involving the vendor in a smart way, but it will depend on your size and ambition, and how much you want to outsource. If you are smart you can outsource the boring stuff and have your key people be involved in the interesting part.

As is the case with many things, preparation is key to minimising disruption during a TMS implementation project. Success in implementation will depend on assembling the best possible team, ensuring everyone on the team has a defined role, and good communication with the vendor throughout the project.

Missed the first three articles of the series? Catch up here:

bob's guide to treasury management systems: About to invest in a new system? Read this first bobs guide to treasury management systems: How financial professionals can prepare for GDPR bobs guide to treasury management systems: How to tell if its time to invest in a TMS

The rest is here:

bob's guide to treasury management systems: How to avoid disruption during TMS implementation - Bobsguide (press release)

Posted in Tms

Indra To Replatform Its Leading TMS Solutions For Hotels Onto Sap S/4 Hana – Hospitality Net

Madrid Indra, one of the world's leading global consulting and technology companies, has replatformed its Travel Management Suite (TMS) onto SAP's leading-edge cloud platform S/4HANA. It allows operating as a real-time enterprise with a single view of each guest. TMS will provide global, multi-property enterprises a single source of truth and visibility. SAP S/4HANA is an in-memory, fast relational database management system and it provides a platform that enables accelerated innovation and predictive experiences for hospitality.

SAP S/4HANA is an intelligent ERP suite designed specifically for in-memory computing. It is the digital core that connects a hotel enterprise with customers, business networks, the Internet of things, big data, and more. Through this migration, Indra is capable of enabling the world's largest and most complex hotel enterprises to take control and run a live business with Indra's TMS solutions on SAP S/4HANA.

With SAP S/4Hana, Indra will offer hotel enterprises the ability to:

"For the last three years we have been introducing Indra as an enterprise platform to support the global technology needs of hotel companies from property and back office to corporate solutions," said Bernardette Orallo, Global Head of Travel & Tourism at Indra: "With a single platform on which to run all PMS, CRS-Reservations, Events, Loyalty, SPA, Connectivity to OTA's and GDSs, Business Intelligence, CRM and other core property solutions, hotel enterprises have been able to attain a 'single view of the guest".

"Until now, hoteliers have never truly experienced the power of operating with a digital core," Orallo said, stressing that "think of SAP S/4HANA as the nerve center of your entire business. It consolidates internal and external elements into a single, living structure that goes beyond traditional ERP software. By connecting all your processes, you gain live information and insights, and seamlessly integrates your enterprise with the digital world at large".

In addition, "this is not just a technology upgrade. We are delivering all of our applications on top of a digital platform. Data is at the center of this platform and all applications ours or those from a third party. With Indra now running on S/4HANA, we will help transform hotel enterprises become data-driven businesses while giving them one of the fastest databases in the world", concluded Travel &Tourism division's Head.

Paul Pessutti, Global Head of Travel & Transportation @SAP, said: "We continue to partner very closely with Indra to bring world-class solutions to the hospitality industry. Our technology roadmaps are closely aligned and it is our mutual goal to help hoteliers reduce the complexity, and deliver a superior customer experience that meets the unique needs of the hospitality industry".

As market leader in enterprise application software, SAP (NYSE: SAP) helps companies of all sizes and industries run better. From back office to boardroom, warehouse to storefront, desktop to mobile device SAP empowers people and organizations to work together more efficiently and use business insight more effectively to stay ahead of the competition. SAP applications and services enable more than 291,000 customers to operate profitably, adapt continuously, and grow sustainably. For more information, visit http://www.sap.com. - See more by clicking here.

Contact Barb Worcester PR Pro Send Email

Indra is one of the world's largest consultancy and technology multinationals, a leader in Europe and Latin America and is expanding in other emerging economies, with sales approaching 3,000 million, it employs 42,000 professional and has customers in 128 countries. At the core of Indra"s hospitality practice is its Travel Management Suite (TMS), built on the world-leading SAP technology platform. The TMS services all the business needs of a hotel chain or management company in one comprehensive system, hosted in the cloud or on-premise. It offers unsurpassed functionality for any business area, and it is open, configurable, scalable and modular. Hotels can start with any of the TMS modules and add-on as needed in the future, providing a more custom approach to enterprise management. Indra's "TMS for Hotels" suite provides modules for property management, events (sales & catering), point of sale, loyalty, spa, restaurant, purchasing, finance, etc. These modules can be added over time at the customer's convenience, leveraging the platform and implementation in place. For more information on Indra's hospitality practice, contact Connie Rheams at (214) 554-3851 or email her at crheams@indracompany.com.

As market leader in enterprise application software, SAP (NYSE: SAP) helps companies of all sizes and industries run better. From back office to boardroom, warehouse to storefront, desktop to mobile device SAP empowers people and organizations to work together more efficiently and use business insight more effectively to stay ahead of the competition. SAP applications and services enable more than 291,000 customers to operate profitably, adapt continuously, and grow sustainably. For more information, visit http://www.sap.com. - See more by clicking here.

Visit link:

Indra To Replatform Its Leading TMS Solutions For Hotels Onto Sap S/4 Hana - Hospitality Net

Posted in Tms

Financial Analysis: EDAP TMS (EDAP) and Integer Holdings (ITGR) – The Cerbat Gem

Financial Analysis: EDAP TMS (EDAP) and Integer Holdings (ITGR)
The Cerbat Gem
EDAP TMS (NASDAQ: EDAP) and Integer Holdings (NASDAQ:ITGR) are both small-cap medical companies, but which is the superior investment? We will compare the two companies based on the strength of their earnings, profitabiliy, dividends, analyst ...
EDAP TMS SA (EDAP) Receives An Update From BrokersThe De Soto Edge

all 14 news articles »

The rest is here:

Financial Analysis: EDAP TMS (EDAP) and Integer Holdings (ITGR) - The Cerbat Gem

Posted in Tms