Upper Atmospheric Mission SPORTs an Aerospace Sensor – Space Daily

The U.S. and Brazil are teaming up to study scintillation in the ionosphere, a phenomena that affects radio signals, disrupting communications and GPS navigation. Aerospace is providing a sensor for this international CubeSat mission, dubbed SPORT, that will be deployed off the International Space Station. The ionosphere is a portion of Earth's atmosphere where radiation from the sun creates a lot of electrically charged particles called plasma. The density of the plasma varies depending on the season, time of day, and other factors.

Sometimes there are density depletions near the equator known as equatorial plasma bubbles, and rapid changes in the density at the edges of the bubbles are known as scintillation. Radio signals transmitting from satellites to the ground must pass through the ionosphere and may be affected by the scintillation.

According to the National Oceanic and Atmospheric Administration, "Severe scintillation conditions can prevent a GPS receiver from locking on to the signal and can make it impossible to calculate a position. Less severe scintillation conditions can reduce the accuracy and the confidence of positioning results."

Since scintillation can adversely impact everything from GPS signals to communication to over-the-horizon radar, there has been a large amount of research trying to understand what causes scintillation, how to predict its occurrence, and how to mitigate its effects. However, the ability to predict scintillation remains elusive.

SPORT, which stands for Scintillation Prediction Observations Research Task, is an effort to study the formation and evolution of equatorial plasma bubbles which may, in turn, cause scintillation. "We want to know what are the background conditions pre-scintillation, and can we use that to determine when scintillation will occur?" said Dr. Rebecca Bishop, Aerospace's lead on this project. "That's kind of the holy grail of our whole field."

Brazil will build and operate the 6U CubeSat as well as maintain the ground observation network of radars, imagers, and scintillation monitors. On the U.S. side, NASA is coordinating the launch and the instruments that will go on the CubeSat, including Aerospace's sensor and five other instruments provided by NASA and university partners. Both Brazil and the U.S. will analyze the data and collaborate on individual studies.

"Brazil is very, very interested in scintillation," Bishop said. Due to a large part of Brazil being located near the magnetic equator, and a feature known as the South Atlantic Anomaly, Brazil experiences more scintillation than a lot of other countries.

Aerospace's contribution to SPORT is the Compact Total Electron Content Sensor (CTECS), which is a GPS radio occultation (RO) sensor. It receives the GPS signals and measures how they change as they pass through the ionosphere. From these measurements, the plasma density and a scintillation index can be extracted.

"Historically, GPS RO sensors are on the order of 5 kg and 20 watts, which is basically the same size and twice the power of a 3U CubeSat," Bishop said. "We were developing this as a low-cost, low-mass, low-power GPS RO sensor for a CubeSat."

Aerospace adapted a commercial receiver by adding special software and a custom antenna to create CTECS.

The 0.153 kg sensor will fit nicely on the SPORT CubeSat, and together with the other five instruments, contribute to the valuable data this mission will collect.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.

See more here:

Upper Atmospheric Mission SPORTs an Aerospace Sensor - Space Daily

20 Acre Aircraft Flight Test Facility Enters Federal Aerospace Market – GlobeNewswire (press release)

August 08, 2017 14:12 ET | Source: Flight Research, Inc.

photo-release

MOJAVE, Calif., Aug. 08, 2017 (GLOBE NEWSWIRE) -- Flight Research, Inc. has entered the federal aerospace marketplace with multiple mission awards this year, officials of the Mojave based company announced today.

A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/91771b38-b258-4d30-8fa8-46de601d1c81

The Flight Research, Inc. and the International Flight Test Institute operate a 924,000-square foot campus at the northeast corner of the Mojave Air and Space Port. With ideal accommodations for flight testing and ITAR certifications complete, Flight Research and the International Flight Test Institute have stepped into the prime and subprime federal marketplace for aerospace and weapons testing.

Over the last 35 years, the company has provided flight testing solutions for several aircraft design, certification and UAS projects. Flight Research is also designated by the FAA as the manufacturer of multiple aircraft assembled at the expansive facility.

Flight Research made a strategic decision last year to begin exploring opportunities in the rapidly growing federal aerospace marketplace, said Bill Korner CEO and Chairman of the Flight Research board. "We felt that leveraging our historical experience in aerospace testing and manufacturing at a federal level would be natural and would further our mission of advancing safety, technology, and capability of the aerospace industry.

Flight Research owns and operates more than 40 aircraft comprised of multiple fleets. Aircraft types range from supersonic trainers to single and twin turboprop aircraft as well as many helicopters which are all sought after resources in the aerospace sector. The company has designed a new website to showcase their fleet and vast range of capabilities.

About Flight Research, Inc.

Flight Research has assembled a team of industry leaders and engineers as well as former military test pilots and astronauts. Established in 1981,Flight Research conducts flight test and certification for airframes, aircraft maintenance and modifications, avionics installations, weapons systems testing, test pilot training, advanced upset pilot training and commercial spaceflight training.

Visit our new website atwww.flightresearch.com.

The photo is also available via AP PhotoExpress.

Mojave, California, UNITED STATES

Home

Flight Research CEO

(PNG - 374 x 800)

IMAGE URL | Copy the link below

Formats available:

Flight Research, Inc. Logo

LOGO URL | Copy the link below

Formats available:

Original post:

20 Acre Aircraft Flight Test Facility Enters Federal Aerospace Market - GlobeNewswire (press release)

Aerospace company with Lenexa plant could be acquisition target, reports say – Kansas City Business Journal

Aerospace company with Lenexa plant could be acquisition target, reports say
Kansas City Business Journal
Rockwell Collins CEO Kelly Ortberg told the Triad Business Journal, a sister publication of the Kansas City Business Journal, in May that the company would not likely be looking for major acquisition targets in the near future after the B/E Aerospace ...
Possible UTC Buy Of Rockwell Collins Could Extend Already Broad ReachAviationPros.com
Top 10 Hedge Funds Holding COL - Slide 1 of 10 - Holdings ChannelHoldings Channel

all 64 news articles »

Continue reading here:

Aerospace company with Lenexa plant could be acquisition target, reports say - Kansas City Business Journal

Southeast Aerospace completes Bell 206 Garmin avionics package installation – Vertical Magazine (press release)

Southeast Aerospacehas recently completed a multifaceted Bell 206 Garmin avionics package installation. This program included structural and electrical installations performed by SEA service technicians at the customers facility in Ft. Lauderdale, Florida.

The Garmin avionics package included the installation of a GTN-750H with helicopter terrain awareness and warning system (HTAWS), a GTN-650H, and an ADS-B compliant GTX-345R remote transponder. The GTX-345R was interfaced to the new GTN units for display and control.

A mid-continent HTAWS annunciator control panel was also installed in the pilots line of sight. The GTN was interfaced with the current CDI/HSI, while the non-wide area augmentation system (WAAS) global positioning system (GPS) antennas were replaced with GA35 WAAS GPS antennas.

A GTS-800 TAS system was installed using a single GA58 directional antenna. The GTS-800 system interfaced to the GTN series radios to provide an active traffic solution. To complement the innovative features of the GTN package, Garmins FlightStream 510 multimedia card was also supplied to assure Wi-Fi/Bluetooth connectivity and simplified cockpit management.

See the article here:

Southeast Aerospace completes Bell 206 Garmin avionics package installation - Vertical Magazine (press release)

Adventures in non-faith – Rappler

We are now witnessing Catholicism at its best. Those from the faith would do well to reconnect with their faith today, and join their Church as it tells those who suffer that they too may partake of the kingdom of God distant but ever present.

Published 3:02 PM, August 07, 2017

Updated 3:02 PM, August 07, 2017

My fiances dream wedding has always been a small, private ceremony in San Franciscos city hall. She will, fortunately for her, get her dream wedding, and, unfortunately for her, be stuck with me for the rest of her life. The civil ceremony abroad begs a question for some friends and relatives: So, when is the Church wedding and reception in the Philippines?

It wont happen, we tell them. For one, we are too shy for large, bourgeois affairs in the Pinoy mold petrified by the monolith that is the wedding/industrial/same-day-edit complex. And, of course, theres that other thing of me being an agnostic. Not a problem, many of my friends say. In the Philippines, even lapsed Catholics and nonbelievers get Church weddings, because thats just what you do.

Catholicism is a cultural norm, not just a set of beliefs. My similarly agnostic and then communist mother was forced into a Catholic wedding (actually into matrimony, since she just wanted to live in), because it would have been shameful not to have one. And my parents, of course, had to get me baptized.

Catholicism is influential in this country because it is a default setting. As a consequence, people rarely grappled with it. For many believers, their faith is wallpaper. And when was the last time people had a debate about the state of their wallpaper? Yet the wallpaper of Catholicism shapes our society in profound ways. It can cause harm by denying contraceptives to poor women. And it can save lives by sheltering the adiks that Duterte seeks to kill.

The advantage of the nonbeliever is a certain distance. Over the years, I have watched Philippine Catholicism from the outside, but also the inside. I grew up in a secular household: Papa is a non-practicing believer and Mama believes that the only humble response to the question of Gods existence is I dont know.

I was also raised by my maternal grandparents, who discovered agnosticism together as they discovered the depths of their ever-deepening love. Both academics, their favorite philosopher was Bertrand Russel and one of their favorite books was Russels Why I am not a Christian. Lolo and Lola died unsure where they were going, but sure of their love for each other.

Unlike many of my nonbelieving friends, I did not stumble upon secularism; I was born into it. And whenever I explored Catholicism, it was always with a sense that I was wading into a tradition not my own. Studying from prep to college at Ateneo, I of course had to learn the faith a faith I professed as a grade school kid, not wanting to feel excluded. By high school, I was outwardly a secularist, but learned to shut up about this fact since my classmates teased me for being an atheist (an agnostic is not an atheist).

Early in college, I was attracted to Catholicism anew. I loved my theology teachers, who presented a version of the faith that satisfied both my intellectual curiosity and my incipient social consciousness. For some reason, I was also more open to the notion of God. I remember meeting an old high school friend who had started studying at UP. She told me that UP was forcing her to question her faith, and I sincerely replied that Ateneo was forcing me to question my non-faith.

I closed the door to Catholicism late in college as I grew more confident in my skin, believing I could confront moral issues on my own by studying philosophy and literature. Through Aristotle, I discovered the virtue of dedication to a political community. Through Foucault, I learned that multiple people could be marginalized in multiple ways. Through Austen, I discovered warmth and the quiet beauty of daily acts of kindness. I value my personal morality as much as believers value their faith-based morality.

In grad school, I had already weaned myself from faith, and any openness to Catholicism dissipated as the reproductive health (RH) wars reached their crescendo. During my experiments in faith, I grew to love the Catholicism of liberation theology: it addressed the pressing issues of inequality and social marginalization. It was a faith of justice. It was practical, real. But I found the sex-obsessed, anti-RH Catholics strange. Why waste so much energy denying adults consensual fun? No condoms, no premarital sex, no living in, no masturbation, no gay sex all are prohibitions anchored more on St. Augustines bizarre notion of guilt than they are on coherent beliefs about human development.

So when Duterte started cursing the Church, he did so at a good time for a politician. The RH debates had turned off even some true believers. The anti-RH campaign exposed the bishops as bullies, who sought to impose their will on secular politics, denying scientific evidence in the process. At no point had the Catholic Church in the Philippines been so weak against a secular leader.

But Duterte is also an opportunity for the Church to make itself relevant. As Sheila Coronel writes, priests are now the first line of defense for the poor threatened by Digongs war on drugs. These days, I feel more warmth whenever I enter a Catholic church or a chapel. I know these places and the institution that runs them have become sanctuaries for the poor, the excluded, the subhuman. The Church recognizes their dignity because it sees in them the image and likeness of God. Unlike the callous horde that simply view them as refuse.

We are now witnessing Catholicism at its best. Those from the faith would do well to reconnect with their faith today, and join their Church as it tells those who suffer that they too may partake of the kingdom of God distant but ever present. As for me, I remain an outsider and an observer. But I observe with a growing sense of admiration. Those in the sidelines are, after all, permitted to cheer. Rappler.com

Lisandro Claudio (@leloyclaudio on Twitter) teaches history at De La Salle University and hosts the Rappler web show Basagan ng Trip.

See the rest here:
Adventures in non-faith - Rappler

Brand marketing challenges in changing times – AdNews – AdNews

This is a free article from AdNews print magazine August edition. You candownload adigital version of AdNewsandsubscribe to the premiumprint edition here.

As new avenues for marketing continue to open up and brands have more opportunity to connect with their consumers than ever before, it is increasingly difficult to create a meaningful brand message that resonates seamlessly across all platforms. Especially in markets heavily saturated by mobile devices.

The consumer is in control and you have no story

The consumer journey is no longer linear. Consumers are now in control of their own buying experience; they are already informed and are looking at brands to answer their needs across numerous mediums. They are disinterested in brand narrative and care more about where the product is sourced, ease of access to the product and its impact on them and the real-world.

With this in mind, brands need to execute on their vision effectively to form a relationship with their customer, a relationship that can be maintained, so that customers become loyal. Subsequently, this means that marketers need to be decisive and deliver bad execution, no matter how great the vision, is the main reason marketers fail. Closing the gap between vision and execution is the challenge, and to do so you need to have the right marketers or agencies with the right skills to implement and execute on both.

Channel agnosticism continues to stretch and mobile continues to dominate. New-era marketing channels such as Snapchat and InstagramLive are here to stay and these real-time micro-moments form a pivotal point in the consumer journey. Brand storytelling has well and truly changed; take Brand Filters in Snapchat for example. Consumers now create and curate their own branded stories and distribute these themselves, providing powerful real-time content. This not only acts as a form of content marketing, but it also provides in-depth information on the consumer given the context, timing and reason for their sharing.

One channel too many and the data rat race

With so many new, as well as traditional marketing channels available, brand marketers need to understand which to use and when. As consumers continue to channel surf, delivering the right message, on the right channel, at the right time is imperative. Controlling all of these touchpoints and ensuring unified messaging in an increasingly fractured communications landscape, is a fine art.

Once you have chosen a channel, the customer experience, is now affected by the utilisation of personal data. As more and more emphasis is placed on tailored user experience, brand managers need to look at what they do with data and how it fits into their long term strategy.

This growing trend for personalisation has led to a rat race of customer information gathering and brands need more and more data to continue to stay ahead. An easy differentiator for a brand in a crowded market place is the depth to which they know their customer and how they choose to use this data. But it is rare that marketers actually know how to effectively use this data, with many lacking an understanding of how to use it in application.

More marketing opportunities and more customer data are all well and good, though the downside is that investing in so many channels is costly. But costs are significantly reduced through the reuse and repurpose of assets across platforms. This efficiency empowers brands to achieve greater consistency of brand message at the global, local and regional level without spending more.

The power of a partner

With so many moving parts, it is no surprise that brands are putting so much importance on their strategic agency partnerships to streamline processes and gain efficiencies. A successful partnership is one where there is a deep understanding between agency and brand of the bigger picture and the smaller milestones passed to get there.

As brands seek to do more with less, as budgets plateau and channels increase, it is easy to get carried away. Working with a strategic partner can give you a fresh perspective and can help you execute cross-channel campaigns efficiently, without compromising on effectiveness. With the right partner, message and channel, brands can place customers in an echo chamber where their brand message reverberates seamlessly from every device.

Check out the full article here:

To read the full magazinedownload adigital versionor subscribe to the premiumprint edition here.

Have something to say on this? Share your views in the comments section below. Or if you have a news story or tip-off, drop us a line at adnews@yaffa.com.au

Sign up to the AdNews newsletter, like us on Facebook or follow us on Twitter for breaking stories and campaigns throughout the day. Need a job? Visit adnewsjobs.com.au.

Read the original here:
Brand marketing challenges in changing times - AdNews - AdNews

New Gene Editing Study Raises Possibilities, Questions – Chicago Tonight | WTTW

An international team of scientists published a new study last week documenting edits theyd made to viable human embryos carrying a genetic mutation, one associated with a life-threatening heart condition. It is the first study of its kind to take place in the United States.

The researchers were able to remove a problematic mutation in the MYBPC3 gene with a higher success rate than in similar studies. After adjusting their method, 72 percent of the embryos were free of the mutation. The scientists believe they may be able to address other monogenetic diseases using the same technique, CRISPR-Cas9.

But the notion of altering human DNA to eradicate inherited diseases is generating concern, too. These genetic changes would permanently affect the DNA passed through a family line, for one. Other critics raise the possibility of altering embryos to create desired characteristics (though it would be much harder for scientists to target genes associated with humor, creativity or physical traits).

Cardiologist and geneticist Dr. Elizabeth McNally is the director of the Center for Genetic Medicine at Northwestern University. She joins Phil Ponce in discussion.

Related stories:

UIC Launches Stem Cell, Regenerative Medicine Center

June 12: Researchers at UIC will focus on understanding tissue regeneration and spearheading future developments in stem cell biology as a means to repair diseased organs and tissues.

The Science and Ethics of Editing Human Embryos

Feb. 28: Earlier this month, an influential group backs editing the genes in human embryos to eliminate disease. Chicago Tonight guests discuss human gene editing and some of the ethical issues it raises.

Baby with 3 Parents: Genetic Technique Offers Hope, Controversy

Sept. 29, 2016: A baby has been born with the DNA of three parents. We hear about the promise the technique offers for avoiding some birth defects, and the ethical concerns it raises.

Excerpt from:
New Gene Editing Study Raises Possibilities, Questions - Chicago Tonight | WTTW

When genetic engineering is the environmentally friendly choice – Genetic Literacy Project

Thisarticleoriginally appeared at Ensia and has been republished here with permission.

Which is more disruptive to a plant: genetic engineering or conventional breeding?

It often surprises people to learn that GE commonly causes less disruption to plants than conventional techniques of breeding. But equally profound is the realization that the latest GE techniques, coupled with a rapidly expanding ability to analyze massive amounts of genetic material, allow us to make super-modest changes in crop plant genes that will enable farmers to produce more food with fewer adverse environmental impacts. Such super-modest changes are possible with CRISPR-based genome editing, a powerful set of new genetic tools that is leading a revolution in biology.

My interest in GE crops stems from my desire to provide more effective and sustainable plant disease control for farmers worldwide. Diseases often destroy 10 to 15 percent of potential crop production, resulting in global losses of billions of dollars annually. The risk of disease-related losses provides an incentive to farmers to use disease-control products such as pesticides. One of my strongest areas of expertise is in the use of pesticides for disease control. Pesticides certainly can be useful in farming systems worldwide, but they have significant downsides from a sustainability perspective. Used improperly, they can contaminate foods. They can pose a risk to farm workers. And they must be manufactured, shipped and applied all processes with a measurable environmental footprint. Therefore, I am always seeking to reduce pesticide use by offering farmers more sustainable approaches to disease management.

What follows are examples of how minimal GE changes can be applied to make farming more environmentally friendly by protecting crops from disease. They represent just a small sampling of the broad landscape of opportunities for enhancing food security and agricultural sustainability that innovations in molecular biology offer today.

Genetically altering crops the way these examples demonstrate creates no cause for concern for plants or people. Mutations occur naturally every time a plant makes a seed; in fact, they are the very foundation of evolution. All of the food we eat has all kinds of mutations, and eating plants with mutations does not cause mutations in us.

Knocking Out Susceptibility

A striking example of how a tiny genetic change can make a big difference to plant health is the strategy of knocking out a plant gene that microorganisms can benefit from. Invading microorganisms sometimes hijack certain plant molecules to help themselves infect the plant. A gene that produces such a plant molecule is known as a susceptibility gene.

We can use CRISPR-based genome editing to create a targeted mutation in a susceptibility gene. A change of as little as a single nucleotide in the plants genetic material the smallest genetic change possible can confer disease resistance in a way that is absolutely indistinguishable from natural mutations that can happen spontaneously. Yet if the target gene and mutation site are carefully selected, a one-nucleotide mutation may be enough to achieve an important outcome.

There is a substantial body of research showing proof-of-concept that a knockout of a susceptibility gene can increase resistance in plants to a very wide variety of disease-causing microorganisms. An example that caught my attention pertained to powdery mildew of wheat, because fungicides (pesticides that control fungi) are commonly used against this disease. While this particular genetic knockout is not yet commercialized, I personally would rather eat wheat products from varieties that control disease through genetics than from crops treated with fungicides.

The Power of Viral Snippets

Plant viruses are often difficult to control in susceptible crop varieties. Conventional breeding can help make plants resistant to viruses, but sometimes it is not successful.

Early approaches to engineering virus resistance in plants involved inserting a gene from the virus into the plants genetic material. For example, plant-infecting viruses are surrounded by a protective layer of protein, called the coat protein. The gene for the coat protein of a virus called papaya ring spot virus was inserted into papaya. Through a process called RNAi, this empowers the plant to inactivate the virus when it invades. GE papaya has been a spectacular success, in large part saving the Hawaiian papaya industry.

Through time, researchers discovered that even just a very small fragment from one viral gene can stimulate RNAi-based resistance if precisely placed within a specific location in the plants DNA. Even better, they found we can stack resistance genes engineered with extremely modest changes in order to create a plant highly resistant to multiple viruses. This is important because, in the field, crops are often exposed to infection by several viruses.

Does eating this tiny bit of a viral gene sequence concern me? Absolutely not, for many reasons, including:

Tweaking Sentry Molecules

Microorganisms can often overcome plants biochemical defenses by producing molecules called effectors that interfere with those defenses. Plants respond by evolving proteins to recognize and disable these effector molecules. These recognition proteins are called R proteins (R standing for resistance). Their job is to recognize the invading effector molecule and trigger additional defenses. A third interesting approach, then, to help plants resist an invading microorganism is to engineer an R protein so that it recognizes effector molecules other than the one it evolved to detect. We can then use CRISPR to supply a plant with the very small amount of DNA needed to empower it to make this protein.

This approach, like susceptibility knockouts, is quite feasible, based on published research. Commercial implementation will require some willing private- or public-sector entity to do the development work and to face the very substantial and costly challenges of the regulatory process.

Engineered for Sustainability

The three examples here show that extremely modest engineered changes in plant genetics can result in very important benefits. All three examples involve engineered changes that trigger the natural defenses of the plant. No novel defense mechanisms were introduced in these research projects, a fact that may appeal to some consumers. The wise use of the advanced GE methods illustrated here, as well as others described elsewhere, has the potential to increase the sustainability of our food production systems, particularly given the well-established safety of GE crops and their products for consumption.

Read more here:
When genetic engineering is the environmentally friendly choice - Genetic Literacy Project

Armin Van Buuren moved to tears at Untold festival | Trance Hub – Trance Hub (satire) (press release) (blog)

Armin Van Buuren is known well for his power packed performances. Versatile as he is, the trance king can appeal to a vast mainstage crowd which may not be all about trance, but he can also win the hearts of the trance family with his classic sets.

His set at the A State of Trance stage at Tomorrowland saw pure classics. And now again, at Untold Festival he had the opportunity to play a set with the sounds close to his heart. Just like his fans who were overwhelmed with emotions, he was moved to tears because of the music and the response of his fans. They say trance is all about emotions. We saw true emotion right here.

Infact, he even pulled off an all-nighter. Armin was supposed to play a three hour closing set at the festival. But three hours just werent adequate enough and he went ahead and extended it for two more hours!

You can check out his set here:

https://www.facebook.com/pg/UntoldFestival/videos/

Trance enthusiast. Armada Ambassador. Content writer. Im not afraid of 138! Making people give Trance a chance.

Next Post

Come #LiveTheTribe as EVC 2017 brings to India for the very first time the...

Visit link:

Armin Van Buuren moved to tears at Untold festival | Trance Hub - Trance Hub (satire) (press release) (blog)

The Farm, N-Trance, Clint Boon and Brother Beyond head to Oldham for new free music festival – Mancunian Matters

A brand-new, family-friendly music festival is coming to Oldham town centre and best of all, its free.

#OldhamLIVE will take place on Saturday, September 9, under the Parliament Square owls with a line-up that includes a headline set from The Farm, best known for their 1990s baggy anthem Altogether No.

The festival has been set up by Oldham Council and independent radio station Revolution 96.2, and promises to be a great day out for the whole family.

Gemma Hunt, popularly known as Gem from the CBeebies hit show Swashbuckle, will kick things off at noon, headlining a pirate-themed, daytime line-up full of magic shows, puppet performances and Prince and Princess singalongs.

Live music gets underway at 6pm with Stooshe, Kelly Lorenna from N-Trance, a Clint Boon DJ set and Nathan Moore from Brother Beyond also joining The Farm on the bill.

Oldham Council Leader, Jean Stretton, said she was very excited to begin counting down until the big day.

This festival will plug a gap in Oldhams entertainment offer and its great news for residents, families, music lovers, visitors and town centre traders," she said.

Weve got some brilliant local live music venues and events but the new Parliament Square gives us the chance to deliver something extra.

This is a festival with a line-up of established acts and entertainment where families can have fun and enjoy some of the best-selling artists of recent years and all for free.

Were working with Revolution 96.2 doing our bit to promote Oldham and to give families a top day out.

Your bit is to simply come along, enjoy yourselves, spread the word and help to give our local economy a real boost on the day.

Managing Director at Revolution 96.2 Matt Ramsbottom also had positive things to say about the upcoming event.

He said: This is brilliant news for Oldham a real first for the town centre and were excited to be making this happen.

Theres going to be something on offer for everyone at #OldhamLIVE.

The pirate-themed kids show is bound to be a real hit and great fun, and weve tried hard with the music line-up to suit all kinds of tastes.

There are acts on the bill for the nostalgic from the 80s, 90s, Noughties and now.

DJs Elliot Eastwick and Dave Sweetmore from the radio station will lead the Parliament Square crowds through the event.

Local businesses are encouraged to capitalise on the festival and promote special offers for the day using the #OldhamLIVE hashtag on social media.

#OldhamLIVE falls on the final day of the Your Oldham Festival which aims to celebrate the great co-operative activities happening across the borough.

From 10am to 2pm on the same day families can enjoy the Your Future event at Oldham Library.

From creating futuristic pieces of artwork at one of the craft sessions, to duelling with Darth Vader or dancing with royal guests, there should be something for everyone.

To book tickets and guarantee your place for some Galactic Knight Training or a Princess Singalong with your favourite Ice Queen, visit http://www.youroldham.coop.

Full event timings and information on other arrangements for #OldhamLIVE will be released in the run-up to September 9.

Read the original post:

The Farm, N-Trance, Clint Boon and Brother Beyond head to Oldham for new free music festival - Mancunian Matters

‘Observer’ news: Cyberpunk horror game to be released this month – ChristianToday

Cyberpunk-themed horror game "Observer" is set to be released on Aug. 15 on Linux, Microsoft Windows, MacOs, PlayStation 4 and Xbox One. The game is made by the same developers of "Layers of Fear" which was released in February 2016.

Made by Polish video game developers Bloober Team, "Observer" displays some of the elements and visuals that "Layers of Fear" had. The atmosphere in the game is very tension-filled, and not many details about the world is revealed just enough to keep players going.

The story is set in the year 2084, in Krakow Poland where people have learned to cybernetically enhance themselves to improve upon today's daily life. This is not a far-fetched idea, given that technological advancements might allow for the ability to surgically fuse smartphones into people's biology in order for humans to be more efficient.

Players take the role of Daniel Lazarski, a detective equipped with special machine enhancements that allow him to outclass any of the best detectives around the world today. His objective is to solve a series of murder and violence which occurs. This leads him to the setting's poor community. As it would appear, the investigation might lead Daniel to something he might eventually regret.

The main protagonist of the film will be voiced by Rutger Hauer, widely known to play the baddy in 1982's "Bladerunner," the popular film made by Ridley Scott. Hauer's voice, being very deep and raspy, provides a menacing tone that adds to the already dark setting of the game. His voice might also catch the attention of players as they might find it very familiar. This is because he has had a very prolific career in movies, even to this day. In his IMDBpage, it is shown that he has appeared in four movies in this year alone.

"Observer" is a welcome addition to the horror genre in video games, and it will become available starting Aug. 15.

More:

'Observer' news: Cyberpunk horror game to be released this month - ChristianToday

Volume Moving the Tape For Targeted Microwave Solutions Inc. (TMS.V) – Clayton News

Targeted Microwave Solutions Inc. (TMS.V) shares are moving today onvolatility-11.11% or $-0.005 from the open.TheTSXV listed companysaw a recent bid of0.04 and100000shares have traded hands in the session.

Investors often have to make the decision of how aggressive they are going to invest. Some investors looking to make a quick dollar may jump in head first without a plan. This can be dangerous for the health of the portfolio in the long-term. Taking a chance on a risky stock may provide high returns, but investors often need to calculate whether the risk is worth the reward. Managing that risk in turbulent markets may help keep the average investor afloat when the markets inevitably turn sour for an extended period. Doing all the necessary stock research may include keeping a close tab on technicals, fundamentals, relevant economic data, and earnings reports. Investors may have to find a way to keep the rational side from being consumed by irrational behavior when studying the markets.

Now letstake a look at how the fundamentals are stacking up for Targeted Microwave Solutions Inc. (TMS.V). Fundamental analysis takes into consideration market, industry and stock conditions to help determine if the shares are correctly valued. Targeted Microwave Solutions Inc. currently has a yearly EPS of -0.11. This number is derived from the total net income divided by shares outstanding. In other words, EPS reveals how profitable a company is on a share owner basis.

Another key indicator that can help investors determine if a stock might be a quality investment is the Return on Equity or ROE. Targeted Microwave Solutions Inc. (TMS.V) currently has Return on Equity of -124.73. ROE is a ratio that measures profits generated from the investments received from shareholders. In other words, the ratio reveals how effective the firm is at turning shareholder investment into company profits. A company with high ROE typically reflects well on management and how well a company is run at a high level. A firm with a lower ROE might encourage potential investors to dig further to see why profits arent being generated from shareholder money.

Another ratio we can look at is the Return on Invested Capital or more commonly referred to as ROIC. Targeted Microwave Solutions Inc. (TMS.V) has a current ROIC of -108.54. ROIC is calculated by dividing Net Income Dividends by Total Capital Invested.

Similar to ROE, ROIC measures how effectively company management is using invested capital to generate company income. A high ROIC number typically reflects positively on company management while a low number typically reflects the opposite.

Turning to Return on Assets or ROA, Targeted Microwave Solutions Inc. (TMS.V) has a current ROA of -95.05. This is a profitability ratio that measures net income generated from total company assets during a given period. This ratio reveals how quick a company can turn its assets into profits. In other words, the ratio provides insight into the profitability of a firms assets. The ratio is calculated by dividing total net income by the average total assets. A higher ROA compared to peers in the same industry, would suggest that company management is able to effectively generate profits from their assets. Similar to the other ratios, a lower number might raise red flags about managements ability when compared to other companies in a similar sector.

Read more:

Volume Moving the Tape For Targeted Microwave Solutions Inc. (TMS.V) - Clayton News

Posted in Tms

Porsche 911-Look Fiat 500 Is Like A Cloning Experiment Gone Wrong – Motor1.com

Pictures have been revealed on Facebook of a modified Franken-Fiat modified to look like a Porsche 911.

This magnificent project is apparently the result of someone in Greece with too much time on their hands. Given the state of the country's economy over the last few years, the price of a brand new Porsche 911 would probably get you the country's national bank.

While Porsche is exploring the limits of taste with its range of supersized sporting SUVs, the German manufacturer has yet to dip a toe in the small car waters, unlike its more premium competitor Aston Martin, which brought us the Toyota iQ-based Cygnet back in 2012.

The Fiat 500 base car is a decent choice, given that both it and the Porsche 911 have engines mounted in the back of the car, but in many ways any of the similarities end there.

You might also imagine that the creator of this entrancing automotive drag act might have picked a better end product than the visually challenging 1998-2004 996 model of 911, but looking at what they've done, such discussions are probably moot.

At any rate, feast your eyes on thisvehicular delight we can't seem to tear ours away.

Source:How Not to Design a CarFacebook page

Read more from the original source:

Porsche 911-Look Fiat 500 Is Like A Cloning Experiment Gone Wrong - Motor1.com

Horse Clones Start Heading to the Races – Bloomberg

Two identical Crestview Genetics Arabian horse clones stand at a ranch in Lujn, Argentina.

Santa Anita Park, in the Los Angeles suburb of Arcadia, is the racetrack where a bay-colored horse named Seabiscuit became a national hero some 80 years ago. Today, about 14,000 people still show up on a typical racing day to watch the thoroughbreds. Punters wagered more than $660 million here last year. Even on a Thursday afternoon, the park, nicknamed the Great Race Place, is bustling.

The steady parade of debutantes in towering hats offers a reminder that horse racing remains a bit outside of time, a world unto itself. Tradition and lineage are of tremendous value. The multibillion-dollar market for racehorse breeding is strictly controlled, especially in the U.S., where racing organizations adhere closely to rules that havent changed much since Seabiscuits day. The American Quarter Horse Association, the U.S. Trotting Association, and the Jockey Club are among the groups that have banned even artificial insemination in the breeding process. You can guess how they feel about cloning.

I dont see this breed registry doing it, says Jockey Club spokesman Bob Curran Jr. Can that clone possibly be better than the original? Its unlikely. In some quarters, however, the old guard has less say in the matter.

The first cloned horse was born in 2003, and a small group of companies is now cranking them out. Clones have already flooded the world of polo, where multiple copies of a champion often battle on the same field. The Professional Rodeo Cowboys Association lets the genetic duplicates compete in barrel racing and donkey racing events. And the International Equestrian Federation, the global governing body for equestrian sports, has sanctioned clones for Olympic events. Until recently, it didnt even require owners to disclose that little detail. We dont see it as relevant, says federation veterinary director Goran Akerstrom.

So far, the big winner in the great clone race has been Alan Meeker, chief executive officer of Crestview Genetics. Since 2010 the 52-year-old Texas oil heir has created close to 100 horse clones valued at $500,000 to $800,000 each, depending on how long the companys raised them. The clones have sired more than 375 foals, colts, and fillies priced at $50,000 to $250,000. Crestview, started in 2009 with about $20 million from Meeker and Argentine Adolfo Cambiaso, the worlds leading polo star, splits its 45 staffers between Texas and the polo hub of Buenos Aires. Meeker says the company is profitable, is worth about $75 million, and has settled the debate between nature and nurture: To say that you can get the same DNA and you cant get the same results, weve debunked that completely.

Until recently, Crestview licensed its cloning technique, the one that yielded Dolly the sheep back in 1996, from ViaGen LC, which does a brisk business cloning livestock and pets. That meant harvesting ovaries from slaughterhouse horses, injecting the desired DNA, then implanting the fertilized embryos in surrogate mothers, typically trying several times to produce one clone.

In late 2015, Crestview worked out its own way to remove embryos from a living horse and quickly implant them in another. Meeker says that gives the company a 90 percent chance the surrogate mothers system will accept the clone embryo and produce a healthy clone. Last October, Cambiaso won a polo match riding a succession of six clones of his late champion, Cuartetera. Now that Crestview has cloned more than two dozen Cuarteteras, such feats are starting to become routine.

The most important business stories of the day.

Get Bloomberg's daily newsletter.

Unlike with polo horses, uniform excellence isnt the ideal for racehorses, says Ernie Bailey, a genetics professor at the University of Kentucky. The old-school breeders try to mate speedsters with mares they think will produce even faster horses. Let that beautiful alchemy of Mother Nature see if you get a winner, says Seabiscuit author Laura Hillenbrand. I dont want another Seabiscuit. Hes enough. Besides, even genetic twins can be noticeably different depending on which genes happen to be expressed, meaning switched on, says Doug Antczak, a veterinary scientist at Cornell University.

Meeker says his team is working on decoding the mysteries of gene expression and on extrapolating its work with horses to advance human stem cell research. Hes making himself the first test subject for a possible genetic cure for Type 1 diabetes, which hes aiming to make available to the public for $10 million per patient at a clinic in the Bahamas by the end of next year. What do the old-timers back at Santa Anita Park think about his work with horses? In the tunnel between races, a mustachioed jockey looks up from texting and answers questions about horse clones by spitting in the dirt. His trainer laughs. But the question is serious.

BOTTOM LINE - Since 2010, Crestview Genetics has created about 100 horse clones for polo, and Olympic equestrian events are fair game, too.

Read more from the original source:

Horse Clones Start Heading to the Races - Bloomberg

Hassane El-Khoury’s active evolution of Cypress – The Mercury News

Cypress Semiconductor Chief Executive Hassane El-Khourys first year on the job has been eventful, to say the least.

El-Khoury, who has been with Cypress since 2007, took over as CEO on August 11, 2016. But, he wasnt just taking over a job from anyone else. At that time, El-Khoury succeededchip-industry legend T.J. Rodgers, who stepped down in April of last year and who had been Cypress only CEO since he founded the company in 1982.

Last October, El-Khoury oversaw Cypress cutting of 500 jobs, or about 8 percent of its workforce.

Cypress shareholders elected two of Rodgers nominees to the companys board, and in early July, Bingham stepped down from Cypress board.

In the meantime, El-Khoury has led a transformation of Cypress called Cypress 3.0, in which the company isfocusing on high-growth areas such as its automotive business and consumer products. And with that, El-Khoury wants Cypress to be known as a company that takes on, and solves, its customers problems.

To me, its an evolution, El-Khoury said, because we had bits and pieces, but it wasnt a coherent story.

El-Khoury spoke about Cypress recently at the companys San Jose headquarters. His comments have been edited for length and clarity.

Q: Youve said Cypress is a new company. Why did you feel the need to make itnew?

A: At Cypress 3.0, we are looking at how you take all these capabilities and create solutions that really target a customers needs. We needed to be a different company because the world also changed around us. Automotive growth requires a different skill set, a different DNA, for example. If you have that focus, you can get more of a benefit from your investment. Weve done that in automotive, and were number one in automotive memory, touch screens. Thats a very credible strategy weve focused on.

Q: Automotive seems to be a thing that everybody is into today.

A: Before the merger (with Spansion), beginning in 2015, automotive was about 15 percent on a$750 million annual revenue run rate. Today, its 30 to 32 percent on a $2 billion run rate. Theres a lot of hype in automotive, so when I talk about it, I have the numbers and the success that the team put behind us to say, Yeah, were an automotive supplier. When I say, This is what were doing in auto, were doing it. Theres no feeling around in the dark to see what hits. We know exactly what to do.

Q: How open is the automotive industry to what Cypress is offering?

A: Their guys come through and audit our processes and say, Now you are worthy to be our supplier. Thats a lot of work and money on their side. When we acquired Broadcom (Cypress bought Broadcoms wireless internet of things business for $550 million in April 2016), that became an asset. And we got the calls from the automotive guys. They wanted to talk to us about how they could design our new products into their platforms. If you provide quality, they feel like they have no reason not to use Cypress (technology), nor to maximize it. We can bundle and optimize what they need.

Q: Automotive is obviously a big deal, but what about the consumer market?

A: Our strategy is broad, by definition. So, these are new markets coming in, and we have to be able to capitalize on them. And our strategy is to dominate the capability there. IoT (internet of things) is a capability. A connected car doesnt move the car from the automotive bucket, it puts it in the IoT bucket. The IoT capability in the consumer market is what were going after. Once you have the main event, then everything else you get, you can dominate.

Q: When you came in as CEO, were you feeling like Cypress had been missing out on things, or there were areas you could have had?

A: Not really. My role before I became CEO was running the connectivity division. Within that, is where automotive was. With the IoT business, we were not missing out. But, with focus, we thought about how we could do more and capitalize on the opportunities we had. Yes. And that was the reason we did the restructuring in September. Its not that we were blind to it; we saw that we could do more and do it better.

Q: Whats the reaction been like in the company?

A: From where I sit, its been very positive. Employees have no problem sending me an email telling me, This sucked. Which they did when I first deployed the new brand. We had problems in the banner. And we learn in business school not to use problems in a brand. I got a lot of feedback asking if we could change that. I said, No. Everybody comes here to solve problems. Customers call us when they have a problem. This is what we do. We went with it. And after we deployed it, and they saw it in a context, they said, Slam dunk! This is what we are about. The atmosphere of collaboration is alive, and that makes it refreshing for me.

Age:37. Occupation:CEO and President, Cypress Semiconductor. Education:Bachelors of science degree in electrical engineering (BSEE) from Lawrence Technological University in Southfield, Mich., and a masters degree in engineering management from Oakland University in Rochester Hills, Mich. Family:One daughter. City of residence:Pleasanton.

1. His hometown is Beirut, Lebanon.

2. Before joining Cypress, he worked for Continental Automotive Systems, a supplier of electronics and other systems for major automakers.

3. He considers his father as his early inspiration for his interest in electronics.

4. As a boy, he once took apart a remote-controlled car he got for Christmas and turned it into a flashlight.

5. He sees his professional mission as working on projectsthat really matter and shapethe way people connect with each other and the world around them.

Read more here:

Hassane El-Khoury's active evolution of Cypress - The Mercury News

The Path Toward Autonomy: Munster On Tesla’s Critical Evolution – Benzinga

As far as Gene Munster is concerned, Tesla Inc (NASDAQ: TSLA) has no problem with appeal.

It isnt about demand, the managing partner of Loup Ventures told Benzinga Wednesday. They have plenty of demand. Theyve been underselling this vehicle, and as you know, they have about 500,000 pre-orders for it.

No, Teslas problem isnt demand. Its production. Its a relatively low economy of scale that Munster considers currently prohibitive to the companys success.

Tesla reports much lower yields than those of traditional automakers like General Motors Company (NYSE: GM) and Ford Motor Company (NYSE: F). In the last quarter, the company produced 30 Model 3s, and in the upcoming quarter, it plans to produce about 1,500. Ambitious CEO Elon Musk aims for 10,000 a week in 2018.

Tesla isnt there yet, but Munster sees potential in its processes.

If you want to just be blown away, look at how the manufacturing of a Model 3 is versus how even some of the automated manufacturing from some of the Big 3 is, he said. The level of efficiency and robotics used in building a Model 3 really changes the equation around the pace that they can manufacture.

But even with its futuristic mechanisms, its largest plant can only produce a million vehicles a year at full capacity compared to BMWs 2.5 million niche cars produced last year. Munster said Tesla needs to invest in a bigger plant to match pace with competitors.

Whether it takes the steps to scale is the critical question around the Tesla story, Munster said. But he has hope. I think that theyre going to get there.

If not, the firm risks vindicating skeptics concerned with high consumer costs.

The expense of a Model 3 is a potential deterrence for buyers.

With a $35,000 base price and an anticipated final cost closer to $50,000 after all features are added, the product is about 40 percent more than the average $32,000 Toyota Motor Corp (ADR) (NYSE: TM) Camry, according to Munsters calculations.

But over time, that price gap diminishes.

If you look at total cost of ownership, which factors in lower insurance, the energy-saving cost with fuel, and the maintenance theres almost no maintenance on these cars, then that cost of ownership gap shrinks to about 14 percent, Munster said. I think that cost gap isnt as big as youd think when you think about total cost of ownership over a five-year period.

Musk has given a two-year timeline before hes ready to flip the switch on autonomy for existing Tesla models, but Munster extended the goal to 2020.

In fact, he said it will be another eight years before Teslas self-driving cars become mainstream, largely due to fear-driven legislative roadblocks.

I think its going to take a few years after [technology updates] to start to advance and get the legislation to loosen up to allow these, he said. I think this is probably 2025 before this is mainstream and you see a self-driving car and dont think twice about it.

Related Links:

Gene Munster: Traditional Car Manufacturers Face 'Innovator's Dilemma'

Tesla And The Auto Markets New Big Three

View More Analyst Ratings for TSLA View the Latest Analyst Ratings

Posted-In: autonomous vehiclesAnalyst Color Travel Analyst Ratings Tech Trading Ideas Interview General Best of Benzinga

2017 Benzinga.com. Benzinga does not provide investment advice. All rights reserved.

Read the original post:

The Path Toward Autonomy: Munster On Tesla's Critical Evolution - Benzinga

Robotics class expands to more Gwinnett County students | WSB-TV – WSB Atlanta

by: Steve Gehlbach Updated: Aug 7, 2017 - 7:17 AM

GWINNETT COUNTY, Ga. - Students in the state's largest district will have new tools and new programs when they go Back 2 School Monday morning, and it includes robots.

All elementary, middle and high school students in Gwinnett County will get their hands on robots.

It is part of the districts STEM Science, technology, engineering and math approach for all grades.

Channel 2s Steve Gehlbach visited Puckett Mill Elementary School to see how the program works and how students build the robots.

Every child at our school has an opportunity to program robots, to build robots, to learn about coding, said instructional coach and robotics mentor Mandy Collins.

I think its a fun learning experience, fun to have hands-on learning, how to build stuff, make stuff, said student Nick Perdue.

TRENDING STORIES:

Students at Meadowcreek High School also get to do just that at their new makerspace that opened at end of last school year.

The new labs let students use real-life materials to solve real problems, beyond just sitting in a classroom and taking notes.

Gwinnett County's STEM program

So coming into school the first day the students will have the opportunity to actually do what they learn, to solve real life problems, said Meadowcreek principal Tommy Welch. This space provides that opportunity and encourages innovation in our students.

The goal with the robotics and all the STEM education is to get students more engaged, using teamwork, and make learning more relevant to the problems students face outside of the schools in their own communities.

Well have teams of reporters and photographers, as well asNewsChopper2 and Triple Team Traffic guiding you through the first days of the school year, every weekday on

Channel 2 Action News This Morning from 4:30 to 7 a.m.

2017 Cox Media Group.

See the article here:

Robotics class expands to more Gwinnett County students | WSB-TV - WSB Atlanta

Robotics clubs meet to share experiences – ECM Post Review

By Amy Doeun Scott Badger and the Time Crafters with their robot. Natalie Tveit with her snake break dome. Photos by Amy Doeun

Natalie Tveit has just completed her second year in a robotics club. Billys Bots met twice every week from September through January. Their project moved from a regional competition to sectional and finally state. On July 25, Tveit, an eighth grader, and other members of her team (and other teams) assembled at the North Branch Area library to share their experiences and encourage other young people to get involved with the sport. Tveit said that the theme for last years competition was Animal Allies. There are three components to the competition. Tveits mother, Angela, explained: There is a programming component, how well your robot goes through the obstacle course; core values, how well you work together as a team; and a research project. You are judged equally on all components. Tveits club created a snake break dome. Because snakes are endothermic (cold blooded), they need to warm up, and they often go up on roads to heat up, Tveit explained. So we made this snake break dome. It is a piece of plywood painted black with a greenhouse over the top. We found that it heats up at the same rate as the road. We put it by their burrows. It is easier for scientists to find them and study them, and the snakes are less stressed out. There are several levels of competition for a robotics club. There is the First Lego League, which is for ages 9-14. Angela explained that it really depends on the students background when they should advance to the next level, First Tech Challenge, which is for ages 13 and up. There is also a Junior First Lego League, which is kindergarten through third grade. Scott Badger has been coaching the Time Crafters team for four years now. He coaches at the highest level. Badger is an electrical engineer with Boston Scientific. I wanted to start a robotics club with a buddy, and we approached 4-H about sponsoring us, he said. He said that the most rewarding part is how much the students learn. In addition to learning JAVA and CAD (computer aided design), they have to learn the mechanics of building robots, like cutting and drilling aluminum. Several members of Time Crafters were also at the robotics meeting, allowing students to practice driving the robot that they built. They also had a 3-D printer and demonstrated how to use it. The kickoff for the next robotics season will be 6:30 p.m. Aug. 22 at the North Branch Senior Center. Angela Tveit said so far 48 students have expressed interest in robotics. We need coaches; there are six to eight students on a team, Tveit said. To find out more about robotics clubs, contact the Chisago County 4-H office at 651-277-0150. Tveit said last year there was a team from Minnesota that went all the way to Australia to compete.

Originally posted here:

Robotics clubs meet to share experiences - ECM Post Review

Robotics, The New Inspiration of Costa Rican Students – The Costa Rica News

Alejandro Sandi, 17 aos years old, decided to finish school once he started to feel motivated by robotics. After this, he went back to school to study system engineering. He took a course given by the Omar Dengo Foundation through a social program called Metamorphosis. This social plan is free and its promoted by the Santa Ana Municipality Office.

I didnt feel like studying, I just was too lazy. But, after I heard about robotics, I thought that would be superb to go to college to study something like that said Alejandro Sandi, age 17.

Alejandro learnt the basics about robotics thanks to Metamorphosis, a social program created for young people between 12 and 23 years old.

According to Gabriel Picado, the program coordinator, the main goal is to develop skills in the Costa Rican teens and young students by using educational strategies. Besides that, Picado also stated that they took advantage of the prime of this technological era to offer robotics and programming courses. Why? Because those courses facilitate the development of cognitive skills, which are really helpful in the academic environment.

Like Alejandro Sand, other teens felt motivation for school again. Sand said that he felt excited when he learnt that robotics was not only about robots but also about the functioning of applications, games and programs.

On the other side, Iris Gutierrez, Alejandros mom, said that she knew her son was very smart but lazy at the moment of hitting the books. But when her child started the course, the passion in him arose. I got surprised when I saw him arrive home and grab the books to study robotics she said.

After that, Alejandro enrolled in an institute to finish high-school. I feel blessed to see my son wishing to study. In the past, he didnt seem to have goals in life and didnt want to do anything at all Iris said while wiping away the tears of joy.

Not only did Alejandro undertake to learn more but he went further than that.

Ana Lourdes Acua, coordinator of the National Robotics Program and Programming of Omar Dengo Foundation said that the institution was hired by Metamorphosis to provide courses.

We started the course with a group of 6 and we managed to teach three levels of robotics and programming. However, the attendants wanted to learn more and we had to teach the other remaining levels. In total, we taught a total of six levels. We decided to teach robotics and programming in these installations because we can count on the necessary equipment and tools for each class, especially for advanced levels- Acua said.

Alejandro Acua is so committed to the course that he has been able to finish the six levels of robotics. Today, he dreams of being able to study System engineering to participate in the National Robotics Olympiads to be carried out will next Saturday 12th and Sunday 13th respectively.

The rest is here:

Robotics, The New Inspiration of Costa Rican Students - The Costa Rica News

Here’s Why Mazor Robotics Ltd. Gained 20% in July – Motley Fool

What happened

Shares of robot-assisted surgery start-upMazor Robotics Ltd. (NASDAQ:MZOR)gained 20% in July, according to data from S&P Global Market Intelligence. The market boosted the stock in response to news that its most recent spinal surgery system continues to gain traction.

The company began taking orders for its new Mazor X surgical system last October and ended 2016 with an 18-system backlog for the new product. News of just six Mazor X orders in the first quarter this year raised concern that interest in the new system had fizzled, plus a state agency investigation disclosed in June also hit the stock hard.

Image source: Getty Images.

While the company still hasn't shed much light on the reason for the investigation, announcing 16 Mazor X orders during the second quarter, and 19 total system orders, went a long way toward assuring investors that the Mazor X system is indeed gaining popularity.

The pre-earnings order announcement predicted record second-quarter revenue, which the company delivered earlier this month. Second-quarter revenue rose 87% higher from the same period last year to $15.5 million. While placing more systems into more hospitals is important, investors will want to keep an eye on recurring revenue from consumables that must be replaced after each surgery performed. In the second quarter, revenue from kit sales and services rose a healthy 50% to $6.3 million.

Compared with industry giantIntuitive Surgical, Mazor Robotics is still small potatoes. As my Foolish colleague Brian Feroldi pointed out recently, Mazor's focus on spinal surgeries has kept the two from crossing paths. The robotic-surgery space is changing rapidly, but for now, it looks as if Mazor will remain at the top of the nice little niche it's carved out for itself.

Cory Renauer has no position in any stocks mentioned. The Motley Fool owns shares of and recommends Intuitive Surgical. The Motley Fool has a disclosure policy.

Originally posted here:

Here's Why Mazor Robotics Ltd. Gained 20% in July - Motley Fool