Government Shutdown Threatens Future NASA Missions

NASA celebrated its 55th anniversary by shuttering websites and furloughing most of its 18 000 employees as a U.S. government shutdown took effect on 1 October. But future space exploration missions stand to suffer the most from the shutdown's impact.

The U.S. space agency will likely halt work on satellites or spacecraft that have yet to launch, according to NASA's shutdown plans detailed bySPACE.com. Phil Plait, creator of Bad Astronomy, points out that the shutdown could delay the upcoming Mars MAVEN mission beyond its scheduled launch on 18 November and possibly push the mission back until 2016the next time when Mars and the Earth will be aligned in the best positions for the spacecraft to reach the red planet.

A skeleton crew of mission controllers in Houston continues to support the six members of the International Space Station, including two NASA astronauts, an Italian astronaut, and three Russian cosmonauts. But an astounding 97 percent of NASA's approximately 18 134 employees won't work during the government shutdown.

Still, NASA's shutdown plan includes measures tomaintain existing satellites and spacecraft such as the Hubble Space Telescope and the recently-launched LADEE lunar probe, even if the agency will put scientific measurements and photo collection on hold.

"The extent of support necessary and the time needed to safely cease project activities will depend on whether any of the activities are of a hazardous nature (e.g., parts of the satellite may need to be cooled)," according to NASA's shutdown plan.

Perhaps the most public sign of NASA's shutdown is the sudden silence from NASA's many active social media accounts on Twitter, Facebook, and elsewhere. NASA TV has gone offline, and visitors to theNASA.govwebsite are greeted with the message: "Due to the lapse in federal government funding, this website is not available."

Not every space mission has gone into immediate shutdown mode. NASA missions operated by private contractorssuch as the California Institute of Technology's Jet Propulsion Laboratory and Johns Hopkins University's Applied Physics Laboratorywill continue normal operations for the rest of the week, according to aPlanetary Society blog post.

The Jet Propulsion Laboratory covers a wide range of missions such as the Mars Curiosity and Opportunity rovers, Mars Odyssey, Mars Reconnaissance Orbiter, the Cassini spacecraft exploring the moons of Saturn, the Dawn spacecraft sent to investigate two asteroids, the Voyager 1 spacecraft roaming interstellar space and more. The Applied Physics Laboratory covers the MESSENGER mission orbiting Mercury and the New Horizons spacecraft headed for Pluto.

But JPL and APL spokespersons told the Planetary Society that their facilities would still have to conserve existing funding to keep operating beyond the shutdowntaking it week by week until the U.S. Congress can pass a spending bill that can put NASA back on course.

IEEE Spectrums general technology blog, featuring news, analysis, and opinions about engineering, consumer electronics, and technology and society, from the editorial staff and freelance contributors.

See original here:

Government Shutdown Threatens Future NASA Missions

NASA Using the Moon to Understand the Sun: ARTEMIS Extended Mission | Video – Video


NASA Using the Moon to Understand the Sun: ARTEMIS Extended Mission | Video
As the Moon passes through Earth #39;s magnetic field, two lunar-orbiting spacecraft look for turbulence, particle acceleration, and magnetic reconnection. These...

By: VideoFromSpace

Read more from the original source:

NASA Using the Moon to Understand the Sun: ARTEMIS Extended Mission | Video - Video

2013 REAL DEAL! NEW FOOTAGE OF MASSIVE ALIEN BRIDGE ON THE MOON – UFO Coverup – NASA – Video


2013 REAL DEAL! NEW FOOTAGE OF MASSIVE ALIEN BRIDGE ON THE MOON - UFO Coverup - NASA
9/27/2013 - Update to newly obtained moon footage, revealing multiple UFO finds, including massive moon bridges, giant alien towers and more. As always, you ...

By: secureteam10

Originally posted here:

2013 REAL DEAL! NEW FOOTAGE OF MASSIVE ALIEN BRIDGE ON THE MOON - UFO Coverup - NASA - Video

NASA | California Polytechnic Institute Students bring JWST Model to NASA GSFC – Video


NASA | California Polytechnic Institute Students bring JWST Model to NASA GSFC
Engineering students from California Polytechnic Institute brought their Webb Telescope deployment model to NASA Goddard Space Flight Center. The students de...

By: NASAexplorer

Read the rest here:

NASA | California Polytechnic Institute Students bring JWST Model to NASA GSFC - Video

Aliens : NASA’s Curiosity rover discovers water in soil suggesting life began on Mars (Sep 28, 2013) – Video


Aliens : NASA #39;s Curiosity rover discovers water in soil suggesting life began on Mars (Sep 28, 2013)
SOURCE: http://www.foxnews.com News Articles: Nasa #39;s Curiosity rover finds water in Martian soil http://www.theguardian.com/science/2013/sep/26/nasa-curiosit...

By: SignsofThyComing

View post:

Aliens : NASA's Curiosity rover discovers water in soil suggesting life began on Mars (Sep 28, 2013) - Video

Massive Solar Eruption – September 29, 2013 – Courtesy NASA, SDO/AIA, Helioviewer – Video


Massive Solar Eruption - September 29, 2013 - Courtesy NASA, SDO/AIA, Helioviewer
How to Watch the Sun: Spaceweather 101 - http://youtu.be/ld5ecZuHECA Watch the Sun: http://sdo.gsfc.nasa.gov/data/ http://www.helioviewer.org Website: http:/...

By: Suspicious0bservers

See more here:

Massive Solar Eruption - September 29, 2013 - Courtesy NASA, SDO/AIA, Helioviewer - Video

Nasa Maps Ghostly Clouds On Distant Kepler 7B Exo-Planet (PICTURES)

Nasa have maps the clouds on a distant, mysterious planet outside our solar system.

Using data from the Kepler and Spitzer space telescopes, the agency managed to map the Jupiter-like world of Kepler-7b located about 1,000 and 1,400 light-years away from our sun.

Three years of observations were needed to map the 'very low resolution' image of the clouds, below:

The space telescope Kepler was used to first make a rough map of the planet, which showed a bright spot on its western hemisphere. But without further data it was unknown whether this spot was caused by heat or reflected light. Scientists then used the Spitzer telescope to measure the temperature of the planet (a relatively cool 1,500-1,800 degrees Fahrenheit), and determine that the spot was more more likely to be light bouncing off clouds than a heat spot.

"We wouldn't expect to see oceans or continents on this type of world, but we detected a clear, reflective signature that we interpreted as clouds."

Kepler-7b is a pretty strange world by the standards of our solar system. It orbits its star in a tight orbit (5.6 million miles, or closer than Mercury). And although it is much larger than Jupiter - about half as big again as that world, or 16 times larger than Earth - it is much less dense. In fact, if you placed the planet in a giant swimming pool it would actually float.

More than 150 confirmed exo-planets have been discovered so far by Kepler, with 900 known about in all. Recently a mechanical issue with its reaction wheels mean it is unable to collect new data for the search, but astronomers still have four years of findings to scour through for more insights.

Nasa has more details about how the picture was made, and how it continues to search for exo-planets.

Continued here:

Nasa Maps Ghostly Clouds On Distant Kepler 7B Exo-Planet (PICTURES)

NASA's Cassini finds plastic ingredient on Saturn's moon

NASA's Cassini spacecraft has detected propylene, a key ingredient in plastics, on Saturn's moon Titan.

This is the first time the chemical has been definitively found on any moon or planet, other than Earth. The discovery fills in what NASA called a "mysterious gap" in scientists' knowledge of the makeup of Titan's atmosphere and gives them confidence that there are more chemicals there still to discover.

Propylene is an ingredient in many consumer plastic products like car bumpers and food storage containers.

The interest lies in the small amount of propylene that was discovered in Titan's lower atmosphere by one of Cassini's scientific instruments called the the composite infrared spectrometer (CIRS), which measures the infrared light, or heat radiation, emitted from Saturn and its moons.

The instrument can detect a particular gas, like propylene, by its thermal markers, which are unique like a human fingerprint.

Scientists have a high level of confidence in their discovery, according to NASA.

"This chemical is all around us in everyday life, strung together in long chains to form a plastic called polypropylene," said Conor Nixon, a planetary scientist at NASA's Goddard Space Flight Center. "That plastic container at the grocery store with the recycling code 5 on the bottom -- that's polypropylene."

The discovery gives NASA scientists the missing piece of the puzzle for determining the chemical makeup of Titan's atmosphere.

In 1980, NASA's Voyager 1 spacecraft, which has flown past Jupiter, Saturn, Uranus and Neptune, did a fly-by of Titan.

According to the space agency, Voyager identified many of the gases in Titan's hazy brownish atmosphere as hydrocarbons, the chemicals that primarily make up petroleum and other fossil fuels on Earth.

Read more:

NASA's Cassini finds plastic ingredient on Saturn's moon

NASA's fluorescent plane glows with the research flow

Can fluorescent oil help researchers improve better aeronautic designs? NASA hopes so.

Build a tiny plane, cover it in fluorescent oil, and use the results to improve the design of future air-based transport.

That's what researchers at NASA's Langley Research Center in Hampton, Va., hope to achieve with a toy-size model of a hybrid plane. The image above shows a 5.8 percent scale model of a futuristic hybrid wing body, coated in fluorescent oil before being blasted with air.

The team sent the hybrid plane through a 14x22-foot subsonic wind tunnel to "see" and document the patterns of air flowing over and around the model.

While a vast amount of data can be recorded by viewing the movement of a plane with the naked eye, using oil helps researchers view minute details and tweak designs with more precision. By documenting lift and drag in this manner, NASA hopes to improve the aerodynamics of future planes.

The space agency has been pushing research to improve flight efficiency in recent years. As an example, NASA and aircraft carrier Boeing have formed a partnership to improve the flight of craft in space and more efficiently transport crew to and from the International Space Station.

This story originally appeared on SmartPlanet.

View original post here:

NASA's fluorescent plane glows with the research flow

NASA will launch 3-D printer into space

Tools and parts made by a 3-D printer are displayed at Made in Space on Sept. 16 in Mountain View, Calif.

MOFFETT FIELD, Calif. NASA is preparing to launch a 3-D printer into space next year, a toaster-sized game changer that greatly reduces the need for astronauts to load up with every tool, spare part or supply they might ever need.

The printers would serve as a flying factory of infinite designs, creating objects by extruding layer upon layer of plastic from long strands coiled around large spools. Doctors use them to make replacement joints and artists use them to build exquisite jewelry.

In NASA labs, engineers are 3-D printing small satellites that could shoot out of the Space Station and transmit data to Earth, as well as replacement parts and rocket pieces that can survive extreme temperatures.

"Any time we

Project manager Matthew Napoli, left, and director of research and development Michael Snyder test a 3-D printer, which eventually will be used in space. (Marcio Jose Sanchez, Associated Press photos)

The spools of plastic eventually could replace racks of extra instruments and hardware, although the upcoming mission is just a demonstration printing job.

For the first test of a 3-D printer in space, slated for fall 2014, NASA had more than a dozen machines to choose from, ranging from $300 desktop models to $500,000 warehouse builders. All, however, were built for use on Earth, and space travel presented challenges, from the loads and vibrations of launch to the stresses of working in orbit, including microgravity, differing air pressures, limited power and variable temperatures. As a result, NASA hired Silicon Valley startup Made In Space to build something new.

Read the original here:

NASA will launch 3-D printer into space

NASA to send 3-D printer to space station to churn out parts

NASA is planning to send a 3-D printer into space and use it as a mini factory to churn out tools and instruments, sparing astronauts the hassle of lugging spare parts on each mission, according to a report.

The printer is slated to go into space in the fall of 2014 on a supply mission, Associated Press said.

NASA engineers envision a time when 3-D printers can print virtually any part that is needed and avert potential catastrophes in outer space.

PHOTOS: Best states for doing business in 2013

"Any time we realize we can 3-D print something in space, it's like Christmas," Andrew Filo, a consultant with NASA on the printing project, told AP. "You can get rid of concepts like rationing, scarce or irreplaceable."

Certain industries, such as auto manufacturing, have used 3-D printers for some time, and the devices are creeping into the consumer market as well. They "print" three-dimensional objects by melting plastic, metal or other materials and depositing the liquid, layer by tiny layer, according to a three-dimensional, computer-generated design of a necklace, say, or a fork.

In tests, NASA engineers have used 3-D printers to create satellites that can transmit information to Earth and also parts that can survive the harsh environment of outer space, the report said.

Most dangerous jobs: 10 professions with the highest fatalities in America

Theoretically, such printers can help prevent situations such as the Apollo 13 incident in 1970, when astronauts had to make their own carbon dioxide filter with ingenuity and duct tape.

ALSO:

Read more:

NASA to send 3-D printer to space station to churn out parts

NASA Hispanic Heritage Month Profile — Fernando Abilleira, Jet Propulsion Laboratory – Video


NASA Hispanic Heritage Month Profile -- Fernando Abilleira, Jet Propulsion Laboratory
Fernando Abilleira works at NASA #39;s Jet Propulsion Laboratory located in Pasadena, CA where he works as a Trajectory Analyst and Mission Design Engineer for t...

By: NASAtelevision

Read the original here:

NASA Hispanic Heritage Month Profile -- Fernando Abilleira, Jet Propulsion Laboratory - Video