- Sziklai pair amplifier -
Hi everyone im facing problem with my Sziklai pair. I use a 555 timer to generate a signal at a particular frequency and then connect to a Sziklai pair amplifier.

But the problem is when i on the power supply, the output only gives

I'm an student on my way to earning my A&P license and a AS degree. i'm real interested in that plane you see in the breitliner watch advertisement, the one with the counter rotating props. i'd like to get a parts breakdown or schematic of that system. schools to preoccupied with there own curri

DEAR SIR/MADAM

Please tell me that how condenser design?

Am raymond from cameroon I started building up my 3phase generator both wind and hydro but I had problems with the coiling/winding . sir what can I do to have a good amount of eletricity.

Have a nice day

engineer raymond

I need a circuit to power a LED from telephone line voltage indicating that the phone line is connected to the circuit. It must meet FCC guidelines. Off hook voltage is 8-12 vdc.

Any suggestions?

hello i want to know how can calculate the fuel consumption of marine engine

dear all...

i have working on fabrication of alloy material now,

we are processing for welding test of zirconium material for a time, but the result still crack on welding line...

any body know to tell me how the process of zirconium weld joint.

2. is there zircon

Hi all, are there any differences between studs and bolts beside one is threaded along its whole length and the other one has a head? Do they have the same thread pitch and diameters?

Thanks!

Sir we need to carry out HV and DC Hipod test regards to three phase induction motor can you provide the details of it.....

I have load about 200KVA with voltage drop input range around +/-20%.

Please help to answer me if it can be save the electrical consumption by using the automatic voltage stabilizer?

If yes how many % can be saved?

Thanks,

Can using an under rated power source make it pop and smoke? i.e What if I connect a power source rated at 4 Amps to some equipment that may require 6-10 Amps. Will that damage the power source??

What would be the best way to cut out any part made with Lexin or Air Craft Aluminum as a substreaight with an exotic wood vaneer bonded to it. I need it to be cut to exact tolarences so as to fit into factorey specs. The aluminum would be about 3/32 thick and the lexin would be about 3/16 to 1/8

when connecting a 480 3 phase step down transformer to work as a 208 3 phase step up transfomer , do you move the tap connections from primary side to secondary side?

I heard to be ANSI compliant on Generators that the 3 phase fault must be greater than a SLG fault. And a simple 2500kW generator from CAT doesn't do that. So if I want to buy an ANSI compliant generator than who pays/installs the Resistor in the neutral to limit that fault current? thoughts...

Ok, short of doing the experiment myself which I probably will, I wanted to know why it is not possible to make an effective Faraday cage from Mu-Metal?

It seems logical that any good conductive material like Mu-Metal would also shield at least some RF and certainly Static Electricity, but no

Hi all. I need to know what spec power supply to buy for the following application. To drive a 24V DC motor with gearbox. WATT :240. AMP: 14. RPM: 3800. GEAR RATIO on the gearbox is 32:1. Load: Don't know but the application strain is well under what the motor is designed for. I know input must be

My group and I are currently trying to develop a mock business plan for a fictional company. This is our senior project, our topic is Brownfield development and construction. Our objective for the semester is to state why Brownfield development would be a good market niche to enter into.

Any and

USING A DRAGER TUBE TO TEST HIGH PRESSURE SAMPLES..HOW AND WHICH DRAGER TUBE WOULD I USE TO TEST A HP TANK

I an interested in the characteristics of plastic film as found on some food products. I am particularly interested in the electro static qualities of the packaging found on such food items as individually rapped crackers. The film used to package many different items of food and other items is ne

I've had a lot of fun on CR4, and therein lies the problem. It takes up too much of my time. Those of you who would like to stay in touch with me privately please PM me for my email address.

Live long and perspire,

europium