Babu

concerning your alignment,the pump feeds are in center of the axe line the grout will be extremly limited!

Like already somewone talled do a cold alignment and when your pump is on working temperature do a check alignment immidiated after you stop the engine.

i don't think you need to be s

Surface energy of thermoplastics

I was reading something related to surface energy of thermoplastics. And I came across a self made conclusion: Amorphous thermoplastics have high surface energy while Semi-crystalline thermoplastics have low surface energy. I need to know am I right or wrong? and what is the reason behind a plastic

How to Aim Headlights

It's so easy to walk into your local auto parts store and grab any ol' headlamp bulb when one burns out, or you just want to upgrade. But before visiting your local AutoZone, Kragen, Napa Auto Parts, Pep Boys, etc., make sure to watch this episode of Motorz.

In Episode 2 of Season

Odessa's Iron Man

It's too old-school to be a Transformer. But this bizarre hulk has that 1950s sci-fi-comic-book thing going for it. It appears to include the complete front clips of at least three Cold War mobiles. Can anyone identify them

Visit CarDomain.com

Mobile Fuel Tank Cleaning

The MTC-500AFR mobile tank cleaner from Algae-X (AXI) is a three-stage tank cleaning system with an adjustable flow rate motor. The variable speed drive controller is equipped with monitoring LEDs for power and status of the motor. The drive combines a high-starting torque with a soft pump star

Why LEDs Are the Light of the Future

Part I of this blog series discussed LED lighting as a viable option for future lighting needs. While the use of LED lights has been primarily for outdoor lighting, there are plenty of reasons why LEDs may be a more attractive option for lighting up homes as well.

Positive Aspects of

Which Is The Best Tower Climbing School?

I am looking for the best certification, that is reconized anywhere my work may take me in the USA. I work for two major wireless companies as a contractor and will be taking on different work area's for them this fall. Thanks for any help in this matter.

jhunter1972

Sewage treatment plant

Good day to all CR4 Members,

I'm no expert on Sewage treatment plant but given a task to conduct preliminary plant sizing. I can easily arrived on the flow rate (m³/day).

Does anyone of you gents have rule of thumb on the plant space? say m²/m³ of sewage? I know that the plant space will b

Math Puzzles

From me to CR4, a nice math puzzle for everyone :

Complete the sequence:

5, 8, 12, 18, 24, 30, 36, 42, 52, _____

Bonus Question:

How much wood would a woodchuck chuck if a woodchuck could chuck wood? (Please Make Sure Your Answer is in Units of Cords)

Good Luck!

Restraing Slope for Differential Relays

Hi,

do anybody know that how can I set restraint slope for AREVA MICOM P642 and P643 Differantial Relays? We protect the power transformer. I will be very happy, if anybody can send me a setting file for AREVA MICOM Differential relay.

Thank for your attention.

Best wishes

1994 Vauxhall Astra – Electrical Problem

I have a 1994 Vauxhall Astra which despite being well past the UK government's 'scrap by' date has only done 73,000 miles and is a clean and normally reliable car.

This morning it developed a fault however. Whenever I go much past 30 mph the alternator warning light starts flic