Which is the best device available presently for energy saving in three phase induction motors.

Sivaguru

Can any one give some idea of the cost range for pickling of mild steel pipes - in $/Kg or Rs/meter. How do industries generally charge for pickling service (labour charges)..?

Hi all,

I am doing a project based on physical parameter I am using adc 7135 for conversion. Please any one help me providing the assembly level code for drive the adc

Thank you

Never let it be said we don't listen to suggestions. Frequent Hemmings Six Degrees of Automotive Separation Challenge participant marmer recently told us he'd like to see an occasional return to the "classic" Six Degrees format, in which you find as many different possible connections between

One almost never sees unused Jeeps, especially the Willys MB Jeeps cranked out by the thousands and shipped all over the world. So (excluding the possibility of an older restoration) how did one manage to accumulate just 9.6 miles, as did this one that showed up during a recent consolidation

Not to be confused with the measure of average force per unit area of a surface, the stress in this case refers to what makes you exhausted, irritable, and unable to concentrate.

Symptoms of Stress

Since no two people are identical, it makes sense that no two people respond to

Last week's post gave an overview of High Bandwidth Digital Content Production (HDCP). In that post I explained why it is completely useless in the fight against piracy, and how it causes major headaches for the average consumer. This week, I'll detail my personal frustrations with HDCP.

Hey, folks !! nice to see you !

Since I am not an english native speaker, I actually have small problems with choosing a proper word (terminology). There is a word "suspension". When you hear that word at first, you might think about car or something related.. right ?!?

i am just wondering

G'day Yall,

Why do Petrol Bowsers dispense fuel full of air bubbles?

I pose this question because I've noticed this "phenomenon" over a few years now. It usually rears its head as an issue when I'm trying to fill, one or other of my 7 series Volvo's. As when the tanks are 3/4 f

We have Vade - knifegate valves complete with pneumatic linear actuators. we have been looking for the seals but emails have not been responded to.(TP- Tajadera Pasante(through going))

the seals that we are after, are for the pneumatic cylinder actuator, they include the metal case rod wip

I am currently stumped on a Switched Reluctance Motor drive.

It has to be open loop, isolated, be soft start and run at a minimum of 20 RPM. I was going to use a PLD but a friend mentioned that using a PLC with a 555 timer might be better? Any help? Also how would I put a soft starter into it?

What equipment/method will check the Threads to another outer diameter on the same part?

If I have a 3/8" - 16 UNC thread on a nut what size heax head is the nut?

I have a question I would like to ask and that is, is this device patentable by the gentleman in the article. http://www.haaretz.com/hasen/spages/890970.html. The reason I am asking is that in my understanding to gain a patent there has to be an improvement of some sort. In his device there is no im

Does anyone know of ways or material to study for the EIT?

I will probably chose EE for the second portion of the test.

Does anyone know why you would want to put a TVSS in parallel with a solenoid? See attached PDF.

Dear Gurus ,

I am having a problem with the industrial induction heater.Recently due to interlock problem , a metal bar hit the induction coil.( made of copper tube )The coil broken and the cooling water started to leak.

Due to tight schedule , i need to run the machine as soon as

For one of my document the following detail is required

Is there is any bandwidth of voltage level, based on its descriptions like LV,MV,HV,EHV (ie. upto 1000 v it is LV)?

1) There are 28 Sump Lift station spread over a Vast area,Our client wants to upgrade the existing System

2) There is a proposal for Automatic Dewatering from Hydrocarbon Tanks

If we use Conevtional 4-20 ma System then we will have to dig the entire refinery to bring it to Central system,plus

How Safe is Geothermal Energy?

The world may be trying to go green, but some places don't have to try very hard to create a small carbon footprint. Klamath Falls is one of them. The small Oregon city has been using geothermal energy to heat homes, businesses, and sidewalks since the early 199