Greeting all,

Can any body give me some information regarding to saturation consideration difference in salient pole machines and iron rotor turbogenerators.

Dear,

I would like to join A 106 to SA 240 (type 316 L) with combination of welding process (TIG+SMAW)

Is it possible to weld using ER 316 L on root pass and ER 309 L on remaining passes

Dear CR4 Members,

I am involved in maintenance of Boiler pressure parts, kindly help me by providing some sort of ready reckoner for selection of filler rods for welding similar & dissimilar metals. Eg. SA 210 GrA1 to SA 210 GR A1, SA 213 T11 to SA 213 T22, SA213 T22 to SA 335 P22.

The specials and sport customs of the 1950s are always fascinating, if not for the racing history and the various personalities that built the cars, then for the can-do attitude embodied in the cars. Sure, Chevrolet had the Corvette, and plenty of British and other European roadsters were avai

As a case study for feeding a 90 KW motor, what are all the design criteria?

Sizing of conductor, selection of contator, cable size, earthing, etc.

Whether I should feed from the existing MCC or tap directly from the PCC in my sub-station.

Oh medium to soft substance with that harsh name, I'm out of my league.

I wonder if there is a calculator on the web that could simulate air conditioner power use. I had a look at some but they don't seem to do what I want. Here is what I need to do:

1. enter amount of m/3 to be c

Hi,

Can anybody out there design a water pump for me that can pump water up a vertical incline of between 100 metres and 200 metres at the rate of 20,000 (yeah twenty thousand) gallons per minute? The primary challenge is that the pump must run on direct electricity (i.e no fuels) and the tot

Production Engineer opportunity in East Windsor, CT for manufacturing client. Seeking engineers with thermal spray technologies/coatings background.

Please message/email me with questions and I will send full job description. Thanks!

LG

Hello, I am not a chemist. In seeking answers for regeneration of activated alumina this is needed, 0.05N H2SO4 to neutralize the 1% NaOH pre treatment. I do not understand 0.05N. I assume it is the strength. If I have 20% H2SO4 how do I arrive at 0.05N? Please describe this in simple terms so I can

I am asking for input on the best and most practical check valve for a duplex sewage ejector.

The existing System has a ball check made from schedule 80 PVC (GRAY) they seem to work OK but have problems with toys and you can imagine what else getting into the seats and keeping them from shutt

Alright guys, this might be kind of fun to ping around in your heads. I need a hanger to hold a piece of 9"x12" corrugated plastic on a standard chain link fence. Here's the rub, there are going to be lots of them and small children 2-5 years old have to be able to remove and rehang them easily and

78 F-150 now has power climbing hills, thanks to all of your help.

Hey everyone, I have found the problem. The thick gasket under the carb has a crack through the gasket from overtightening, my fault. But thanks to you guys I discovered that I had two vac hoses switched and the fuel cap was n

Hi

I thought I will bring up this topic as my first post here. There don't seem to be many engineering degrees offered in instrumentation (not in Canada at least). So far I have seen engineers from different background (education wise) in this field. I myself am an electrical engineer by degree

I'm a ME major at UCF and I could use some advice on selecting the right motor for a senior design project. For simplicity we would like a AC reversible motor able to run off of 120vac. The motor needs to have at least 20in-lbs torque but the kicker is we need it to run between 200-350 rpms which

Hello everybody,

I've got a problem I've been struggling with. I have a neighbor whose driveway is right next to my bedroom. He has one of these trucks that has a very loud, low frequency rumble. The bedroom has two large windows -- one facing the driveway and the other facing the s

I would like to know what does SA stands for? fr e.g. SA 210 GrA

What is a floor sink? I cannot find any on the web. I assume a typical one is on the order of 6" x 6" x 6", with a 2" diameter outlet, to which you connect a trap, and route to the sewer pipe. One is being specified for almost every plumbing appliance in the kitchen.

It makes sense for an i

From VentureBeat: Interpreting Innovation:

Online maps are extremely useful, but not very innovative in their present form, as most maps we use today merely mirror paper maps. The road map serves most of our everyday needs, but as more and more data with a location component to it

From PopularScience:

Scientists must really dread the dentist -- they're always coming up with new solutions to help people avoid that cursed drill. The latest: a hormone gel that regenerates tooth cells in as little as a month. The gel, the first of its kind, could eliminate th

From InformationWeek:

Shanghai plans to become the first city in China to scrap paper textbooks in favor of e-books and hopes to institute its plan within the next five years. The idea first came to light when the Shanghai Municipal Education Commission said it is already experi