Realkalization of Concrete Structures?

Looking for experience or suggestions regarding alternatives to expensive Electrochemical Realkalization methods.

It has been suggested that use of a lime wash with Type S hydrated lime may increase, if not restore low pH conditions at re bar depths in concrete. Theory is: Introduction of this

Diaphragm Pressure Switch

Sir i have well calibrated diaphragm pressure switch whose setpoint is 12 kg. In addition to diaphragm pressure switch for high pressure tripping there is a bursting disc whose setpoint is 17 kg. The problem is that before the pressure gauge give the tripping command to the pump the busting disc bru

Excel / Visual Basic Cell Fill Color

Dear friends and associates,

I am trying to find a way to cause a cell's fill color to be according to data from another cell or cells.

For instance, I know that from the fill icon, I can specify the RGB color of a cell's fill, so I am hoping there is a way either directly in a formula or

Baby Pierce – The Car That Could Have Been

"Automotive historians have endlessly debated the merits of the junior editions of America's luxury marques of the mid-1930s – the Packard One Twenty, the Lincoln-Zephyr and the LaSalle. Did these cars save their makers or cheapen their reputations? If Pierce-Arrow officials had had their

Koken Barber Chair Brake

After reading over the threads about the barber chairs it dawned on me that my 1946 Koken barber chair does not possess this feature. I've had this chair for fifteen years or so. Every so often the fever hits me and I'll get to tinkering on " my Throne ". Recently, my wife took to re-upholstering

Simulator

hi there

where can i get an electrcal simulator programe to see if my projects is working i'm working with gensets

thanks

Schalk

Wiring Diagram for 2 HP yl90l-4 Electric Motor

When moving YL1236 lathe the complete electrical box was broken, all I have is 6 wires on the motor and 3 from the contactors. There are no labels on the wires.

On the motor are 6 wires coming from 2 holes in the motor.

Top hole

Red, red, black

Bottom hole

Red, red yellow

Thermocouple Problem

Thermocuple type K installed on flare (100meter height) is not working, the reading is varying between 40 to 200 deg C instead of showing the ambient temperature,used the correct TC type extension cable and running down from element to FF transmitter for 100meter distance.

what could be th