Nature-inspired material uses liquid reinforcement – Phys.Org

July 10, 2017 Nature inspired the design of silicone and gallium composites created in Rice Universitys the Nanomaterials Laboratory. Credit: Jeff Fitlow/Rice University

Materials scientists at Rice University are looking to natureat the discs in human spines and the skin in ocean-diving fish, for examplefor clues about designing materials with seemingly contradictory propertiesflexibility and stiffness.

In research appearing online in the journal Advanced Materials Interfaces, graduate student Peter Owuor, research scientist Chandra Sekhar Tiwary and colleagues from the laboratories of Rice Professor Pulickel Ajayan and Jun Lou found they could increase the stiffness, or "elastic modulus," of a soft silicon-based polymer by infusing it with tiny pockets of liquid gallium.

Such composites could find use in high-energy absorption materials and shock absorbers and in biomimetic structures like artificial intervertebral discs, they said.

Owuor said conventional wisdom in composite design for the past 60 years has been that adding a harder substance increases modulus and adding a softer one decreases modulus. In most instances, that's correct.

"People had not really looked at it from the other way around," he said. "Is it possible to add something soft inside something else that is also soft and get something that has a higher modulus? If you look at the natural world, there are plenty of examples where you find exactly that. As materials scientists, we wanted to study this, not from a biological perspective but rather from a mechanical one."

For example, the discs between the vertebrae in human spines, which act like both shock absorbers and ligaments, are made of a tough outer layer of cartilage and a soft, jelly-like interior. And the outer skin of deep-diving ocean fish and mammals contain myriad tiny oil-filled chamberssome no larger than a virus and others larger than entire cellsthat allow the animals to withstand the intense pressures that exist thousands of feet below the ocean's surface.

Choosing the basic materials to model these living systems was relatively easy, but finding a way to bring them together to mimic nature proved difficult, said Tiwary, a postdoctoral research associate in Rice's Department of Materials Science and NanoEngineering.

Polydimethylsiloxane, or PDMS, was chosen as the soft encapsulating layer for a number of reasons: It's cheap, inert, nontoxic and widely used in everything from caulk and aquarium sealants to cosmetics and food additives. It also dries clear, which made it easy to see the bubbles of liquid the team wanted to encapsulate. For that, the researchers chose gallium, which like mercury is liquid at room temperature, but unlike mercury is nontoxic and relatively easy to work with.

Owuor said it took nearly four months to find a recipe for encapsulating bubbles of gallium inside PDMS. His test samples are about the diameter of a small coin and as much as a quarter-inch thick. By curing the PDMS slowly, Owuor developed a process by which he could add gallium droplets of various sizes. Some samples contained one large inner chamber, and others contained up to a dozen discrete droplets.

Each sample was subjected to dozens of tests. A dynamic mechanical analysis instrument was used to measure how much the material deformed under load, and various measures like stiffness, toughness and elasticity were measured under a variety of conditions. For example, with a relatively small amount of cooling, gallium can be turned into a solid. So the team was able to compare some measurements taken when the gallium spheres were liquid with measures taken when the spheres were solid.

Collaborators Roy Mahapatra and Shashishekarayya Hiremath of the Indian Institute of Science at Bangalore used finite element modeling and hydrodynamic simulations to help the team analyze how the materials behaved under mechanical stress. Based on this, the researchers determined that pockets of liquid gallium gave the composite higher energy absorption and dissipation characteristics than plain PDMS or PDMS with air-filled pockets.

"What we've shown is that putting liquid inside a solid is not always going to make it softer, and thanks to our collaborators we are able to explain why this is the case," Tiwary said. "Next we hope to use this understanding to try to engineer materials to take advantage of these properties."

Owuor and Tiwary said just using nanoengineering alone may not provide a maximum effect. Instead, nature employs hierarchical structures with features of varying sizes that repeat at larger scales, like those found in the oil-filled chambers in fish skin.

"If you look at (the fish's) membrane and you section it, there is a layer where you have spheres with big diameters, and as you move, the diameters keep decreasing," Owuor said. "The chambers are seen across the whole scale, from the nano- all the way out to the microscale.

Tiwary said, "There are important nanoscale features in nature, but it's not all nano. We may find that engineering at the nanoscale alone isn't enough. We want to see if we can start designing in a hierarchical way."

Explore further: Self-adaptive material heals itself, stays tough

More information: Peter Samora Owuor et al. Nature Inspired Strategy to Enhance Mechanical Properties via Liquid Reinforcement, Advanced Materials Interfaces (2017). DOI: 10.1002/admi.201700240

An adaptive material invented at Rice University combines self-healing and reversible self-stiffening properties.

Researchers at Rice University and the Indian Institute of Science have an idea to simplify electronic waste recycling: Crush it into nanodust.

Tiny "walking" proteins could be used to investigate mechanical deformations in soft materials according to Hokkaido University researchers.

Mollusks got it right. They have soft innards, but their complex exteriors are engineered to protect them in harsh conditions. Engineers at the Indian Institute of Science and Rice University are beginning to understand why.

Using the principles behind the formation of sandcastles from wet sand, North Carolina State University researchers have achieved 3-D printing of flexible and porous silicone rubber structures through a new technique that ...

(Phys.org)Engineers at Yale University have discovered that the stiffness of liquid drops embedded in solids has something in common with Goldilocks: While large drops of liquids are softer than the solid that surrounds ...

A team of scientists has used microwaves to unravel the exact structure of a tiny molecular motor. The nano-machine consists of just a single molecule, made up of 27 carbon and 20 hydrogen atoms (C27H20). Like a macroscopic ...

Scientists at the University of North Carolina at Chapel Hill and Duke University have created the first general-purpose method for using machine learning to predict the properties of new metals, ceramics and other crystalline ...

Scientists at the University of Sheffield have published new research illuminating how energy is transferred in molecules - something that could influence new molecular technologies for the future.

Analyzing pigments in medieval illuminated manuscript pages at the Cornell High Energy Synchrotron Source(CHESS) is opening up some new areas of research bridging the arts and sciences.

Jonathan Boreyko turned on the defroster in his car one cold winter morning and waited for the ice on the windshield to melt. And kept waiting.

A team of architects and chemists from the University of Cambridge has designed super-stretchy and strong fibres which are almost entirely composed of water, and could be used to make textiles, sensors and other materials. ...

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Read the rest here:

Nature-inspired material uses liquid reinforcement - Phys.Org

Related Posts

Comments are closed.