Space travel visionaries solve the problem of interstellar slowdown at Alpha Centauri – Phys.Org

February 1, 2017 Interstellar journey: The aim of the Starshot project is to send a tiny spacecraft propelled by an enormous rectangular photon sail to the Alpha Centauri star system, where it would fly past the Earth-like planet Proxima Centauri b. The four red beams emitted from the corners of the sail depict laser pulses for communication with the Earth. Credit: Planetary Habitability Laboratory, Univesity of Puerto Rico at Arecibo

In April last year, billionaire Yuri Milner announced the Breakthrough Starshot Initiative. He plans to invest 100 million US dollars in the development of an ultra-light light sail that can be accelerated to 20 percent of the speed of light to reach the Alpha Centauri star system within 20 years. The problem of how to slow down this projectile once it reaches its target remains a challenge. Ren Heller of the Max Planck Institute for Solar System Research in Gttingen and his colleague Michael Hippke propose to use the radiation and gravity of the Alpha Centauri stars to decelerate the craft. It could then even be rerouted to the red dwarf star Proxima Centauri and its Earth-like planet Proxima b.

In the recent science fiction film Passengers, a huge spaceship flies at half the speed of light on a 120-year-long journey toward the distant planet Homestead II, where its 5000 passengers are to set up a new home. This dream is impossible to realize at the current state of technology. "With today's technology, even a small probe would have to travel nearly 100,000 years to reach its destination," Ren Heller says.

Notwithstanding the technical challenges, Heller and his colleague Michael Hippke wondered, "How could you optimize the scientific yield of this type of a mission?" Such a fast probe would cover the distance from the Earth to the Moon in just six seconds. It would therefore hurtle past the stars and planets of the Alpha Centauri system in a flash.

The solution is for the probe's sail to be redeployed upon arrival so that the spacecraft would be optimally decelerated by the incoming radiation from the stars in the Alpha Centauri system. Ren Heller, an astrophysicist an astrophysicist working on preparations for the upcoming Exoplanet mission PLATO, found a congenial spirit in IT specialist Michael Hippke, who set up the computer simulations.

The two scientists based their calculations on a space probe weighing less than 100 grams in total, which is mounted to a 100,000-square-metre sail, equivalent to the area of 14 soccer fields. During the approach to Alpha Centauri, the braking force would increase. The stronger the braking force, the more effectively the spacecraft's speed can be reduced upon arrival. Vice versa, the same physics could be used to accelerate the sail at departure from the solar system, using the sun as a photon cannon.

The tiny spacecraft would first need to approach the star Alpha Centauri A as close as around four million kilometres, corresponding to five stellar radii, at a maximum speed of 13,800 kilometres per second (4.6 per cent of the speed of light). At even higher speeds, the probe would simply overshoot the star.

During its stellar encounter, the probe would not only be repelled by the stellar radiation, but it would also be attracted by the star's gravitational field. This effect could be used to deflect it around the star. These swing-by-manoeuvres have been performed numerous times by space probes in our solar system. "In our nominal mission scenario, the probe would take a little less than 100 years or about twice as long as the Voyager probes have now been travelling. And these machines from the 1970s are still operational," says Michael Hippke.

The video will load shortly

Theoretically, the autonomous, active light sail proposed by Heller and Hippke could settle into a bound orbit around Alpha Centauri A and possibly explore its planets. However, the two scientists are thinking even bigger. Alpha Centauri is a triple star system. The two binary stars A and B revolve around their common centre of mass in a relatively close orbit, while the third star, Proxima Centauri, is 0.22 light years away, more than 12,500 times the distance between the Sun and the Earth.

The sail could be configured so that the stellar pressure from star A brakes and deflects the probe toward Alpha Centauri B, where it would arrive after just a few days. The sail would then be slowed again and catapulted towards Proxima Centauri, where it would arrive after another 46 years about 140 years after its launch from Earth.

Proxima Centauri caused a sensation in August 2016 when astronomers at the European Southern Observatory (ESO) discovered an exoplanet companion that is about as massive as the Earth and that orbits the star in its so-called habitable zone. This makes it theoretically possible for liquid water to exist on its surface water being a key prerequisite for life on Earth.

"This finding prompted us to think about the possibility of stopping a high-velocity interstellar lightsail at Proxima Centauri and its planet," says Ren Heller. The Max Planck researcher and his colleague propose another change to the strategy for the Starshot project: instead of a huge energy-hungry laser, the Sun's radiation could be used to accelerate a nanoprobe beyond the solar system. "It would have to approach the Sun to within about five solar radii to acquire the necessary momentum," Heller says.

The two astronomers are now discussing their concept with the members of the Breakthrough Starshot Initiative, to whom they owe the inspiration for their study. "Our new mission concept could yield a high scientific return, but only the grandchildren of our grandchildren would receive it. Starshot, on the other hand, works on a timescale of decades and could be realized in one generation. So we might have identified a longterm, follow-up concept for Starshot," Heller says.

Although the new scenario is based on a mathematical study and computer simulations, the proposed hardware of the sail is already being developed in laboratories today: "The sail could be made of graphene, an extremely thin and light but mega-tough carbon film," Ren Heller says. The film would have to be blanketed by a highly reflective cover to endure the harsh conditions of deep space and the heat near the destination star.

The optical and electronic systems would have to be tiny. But if you were to remove all the unnecessary components from a modern smartphone, "only a few grams of functional technology would remain." Moreover, the lightweight spacecraft would have to navigate independently and transmit its data to Earth by laser. To do so, it would need energy, which it could harness from the stellar radiation.

Breakthrough Starshot therefore poses daunting challenges that have so far only been solved theoretically. Nevertheless, "many great visions in the history of mankind had to struggle with seemingly insurmountable obstacles," Heller says. "We could soon be entering an era in which humans can leave their own star system to explore exoplanets using fly-by missions."

Explore further: Image: Hubble's best image of Alpha Centauri A and B

More information: Heller, R., & Hippke, M. (2017) "Deceleration of high-velocity interstellar sails into bound orbits at Alpha Centauri", The Astrophysical Journal Letters, Volume 835, L32, DOI: 10.3847/2041-8213/835/2/L32

The closest star system to the Earth is the famous Alpha Centauri group. Located in the constellation of Centaurus (The Centaur), at a distance of 4.3 light-years, this system is made up of the binary formed by the stars ...

ESO has signed an agreement with the Breakthrough Initiatives to adapt the Very Large Telescope instrumentation in Chile to conduct a search for planets in the nearby star system Alpha Centauri. Such planets could be the ...

A very rare gravitational lensing event, set to occur in 2028, has been predicted by a team of French astronomers led by Pierre Kervella of the CNRS/Universidad de Chile. It will provide an ideal opportunity to look for evidence ...

Scientists are preparing to unveil a new planet in our galactic neighbourhood which is "believed to be Earth-like" and orbits its star at a distance that could favour life, German weekly Der Spiegel reported Friday.

The hunt for exoplanets has been heating up in recent years. Since it began its mission in 2009, over four thousand exoplanet candidates have been discovered by the Kepler mission, several hundred of which have been confirmed ...

With the completion of New Horizons' Pluto fly-by, its primary mission, should we now set our sights even higher, ambitiously taking aim at other star systems? If so, Alpha Centauri would probably be considered as the best ...

The CO2 level in Mars' primitive atmosphere 3.5 billion years ago was too low for sediments, such as those found by NASA's Curiosity exploration vehicle in areas like the Gale Crater on the planet's equator, to be deposited. ...

(Phys.org)A European team of astronomers led by Oscar Barragn of the University of Turin in Italy reports the discovery of a low-mass warm Jupiter extrasolar planet orbiting a nearby K-type main-sequence star. The newly ...

A giant black hole ripped apart a nearby star and then continued to feed off its remains for close to a decade, according to research led by the University of New Hampshire. This black hole meal is more than 10 times longer ...

Galaxies today fall roughly into two categories: elliptically-shaped collections of reddish, old stars that formed predominantly during a period early in the history of the universe, and spiral shaped objects dominated by ...

An experimental Japanese mission to clear 'space junk' or rubbish from the Earth's orbit has ended in failure, officials said Monday, in an embarassment for Tokyo.

(Phys.org)A team of space researchers with members from Yale University, MIT and the Harvard-Smithsonian Center for Astrophysics has found a bump in X-ray readings from the Chandra-X-ray observatory that appears to be ...

Adjust slider to filter visible comments by rank

Display comments: newest first

100grams is also pretty ambitious (as it includes the weight of the sail). Graphene weighs 0.77milligrams per square meter. So 100k square meter sail already 77g If you add any kind of reflective layer this will be WAY over the 100g mark. And you need some structural elements to make sure it doesn't collapse under the pressure of the radiation for accelerating/decelerating it.

The StarChip probe package is envisioned at a few grams with a 'compact laser for data transmission'. However I've not seen anyone mention how such a small laser can transmit data over 4 light years.

Sure, the 100 gram useless piece of space junk will be a $100Mil monument to the dumbass ego. Hopefully no aliens will notice it (only 0.00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000012 chance they will, as no one lives in Alpha Centauri system).

What level of drag do you get from this size sail, from the thin interstellar medium? How do you compensate for the unknown medium and wind particulates drag near proxima?

Yes, to say the least, this presented concept is problematic. The asteroid belt contains sufficient kinetic energy to send a much larger probe out at as high or higher speed with far greater safety. Why don't they use that? Asteroids are just sitting there waiting for someone clever enough to start bouncing things around, so to speak. The physics is Newtonian for crying out loud.

I really have no idea how such a small probe can pack all of the systems needed for this probe to be worth while. How is it generating power, storing it, keeping itself warm. What about redundant systems for when a cosmic particle crashes through the probes electronics? Can the probe receive over the air software updates in order to fix the software glitch the system will no doubt be launched with. Can we really track this probe to sufficient accuracy in order to perform corrective trajectory manoeuvres? What bit rate can you achieve from such a tiny, low powered (where's the power coming from) laser? Is it possible to point lasers so accurate we can hit this probe from Earth, 4 light years away??? Surely bi-directional communication is required. Better not need to update the probe in a hurry, 4 years is some savage communication lag!!!!! Unfurling and furling of the sail repeatedly and probe stabilisation during the process...... GOOD F_cking luck with that!!!!!!

Even the swarm-antenna idea doesn't quite work as at the speed and how they are being sent they would only remain in a viable configuration for a tiny amount of time.

This article is about a much slower speed mission which I think might be impractical based on limited attention span of civilization. Also the possibility that we'll have much better propulsion systems before the probe could get there - the probe could find itself being passed by tourist ships on the way to the same destination. 😉

The gravitational focus concept is fascinating because it implies low power interstellar communications are possible. Alas, still limited to lightspeed.

You can graph the time it takes at which a probe (or manned craft) could get there. You can also graph the time it takes each time we double the capabilities of our thrust systems. By those graphs it currently makes no sense to launch, because technological advance will make a craft that is launched *later* arrive there earlier.

We shouldn't be concerned with how we get information back with technology we could make now. We should look to how to get information back at a time when we are close to the break-even point of "travel time vs. tech advance"

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

See the article here:

Space travel visionaries solve the problem of interstellar slowdown at Alpha Centauri - Phys.Org