Monthly Archives: March 2017

NARRAGANSETT Frequent storms and sea-level rise will make beach replenishment increasingly necessary in southern Rhode Island, and there is more than enough offshore sand to do the job.

Bryan Oakley, an assistant professor of geology at Eastern Connecticut State University who monitors beach erosion, and URI oceanographer John King, who located the sand deposits, presented their findings at the University of Rhode Islands Narragansett Bay campus on Feb. 28 as part of Sea Grants Coastal State discussion series.

Westerlys most dramatic beach restoration was in 2014, after Superstorm Sandy damaged Misquamicut State Beach. The U.S. Army Corps of Engineers $3 million restoration effort involved trucking in 84,000 cubic yards of sand from an inland quarry.

From this section: Moratorium on quarries could buy town time

Oakley, who lives in Westerly and tracks changes to the profile of Misquamicut Beach, showed photographs of the beach before, during and after the replenishment of the beach, or berm.

They came in and put 65,000 cubic meters thats 84,000 cubic yards of sand, he said. It cost $3.1 million from glacial upland material .... After replenishment, one of my students said it looked a lot like a highway, not a bad description of it, about as soft as macadam if you were trying to sit on it that first spring.

Oakley said he wanted to see how long the new sand would remain on the beach, so he and his students mapped the area using a global positioning system. They created a model that showed that 39 percent of the sand had been washed away less than a year after the project was completed.

Thats actually not bad, Oakley said. Weve also had no major storms, and since January we havent been out. Well be back out in a couple of weeks, and were looking at some other techniques to get detailed pictures of sections of the beach and see if we can get a handle on some of the offshore distribution as well.

At $36 a cubic yard, upland sand is considerably more expensive than sand dredged from the ocean bottom, which costs $15. Oakley said the benefits of supporting a vital sector of the Rhode Island economy outweighed the expense of replenishment if those costs were kept low. Its economically practical when your rates are relatively low and the economic benefits are high, he said.

In comparison with states like New Jersey, the southern Rhode Island coast is relatively undeveloped, so beach replenishment here is less frequent.

If you think about the stretch from Watch Hill to Point Judith, weve got several large sections of undeveloped barrier beach, Oakley said. Quonochontaug, East Beach, Moonstone thats a great resource, and we should be happy we dont have this level of development that warrants running out and spending millions of dollars to dump a lot of sand on the beach.

Offshore deposits

King warned that sea-level rise would eventually render discussions of beach replenishment irrelevant. You kind of have to put this in the context of were in the midst of a slow-moving disaster of a magnitude weve never seen before due to global climate change, he said. And Im a climate scientist. So when these folks start talking about OK, were going to stop the ocean, I just say, Yeah, sure you are. You may slow it down for a while, but youre not going to stop it.

With funding from the federal Bureau of Energy Management, King mapped sections of the ocean floor in federal waters just outside Rhode Islands 3-mile limit. The goal of the project was to find a source of sand that would be large enough to be used for extensive beach replenishment initiatives.

With beach replenishment, you either go big or go home, he said.

Kings team first used sonar to determine the composition of the ocean bottom and the thickness of the sand deposits. They also took samples of the bottom to determine the quality of the sand. The upland sand used in the Misquamicut replenishment was coarser than natural beach sand and did not match the texture of the existing beach.

When youre doing this kind of thing, you not only need to know if its sand, you need to know if its high-quality sand, he said. King said he knew from looking at geological data that the best sand would likely be found off the coast near Charlestown, where it had been deposited when the glaciers retreated 20,000 years ago.

We sort of zeroed in on this area along the south coast, he said. Theres a thing called the Charlestown moraine, its like a long pillow, which is actually a glacial terminal moraine a big pile of material that builds up in front of an ice sheet.

In front of the terminal moraine was a huge lake, which was created by a dam made by the ice sheet and the moraine behind it.

So you had a very, very big glacial lake, and streams coming off of this ice sheet into the lake, forming big deltaic deposits. So these loaves of material are deltas that were actually debris coming from the melting ice sheet, sometimes underneath, a little bit over the top, carrying a lot of sand and gravel, he said.

Kings team decided to take a closer look at the sand and gravel deltas and created profiles of what are known as glaciodeltaic deposits, and they are huge. The newly mapped deposits are estimated to contain approximately 160 million cubic meters, or 209,272,099 cubic yards, of sand.

We have an order of magnitude more sand out there than we need anytime soon, King said.

The next phase of the project will involve a Special Area Management Plan of the areas where promising deposits have been found to determine the effects that mining the sand might have on the marine ecosystem.

The question is, can you go out there and remove 5 to 10 feet of this material without having a really devastating impact to the bottom, and thats a question we dont have an answer to yet, King said. Thats where the SAMP approach comes in. At some point, we have to talk about what are the impacts to habitat.

cdrummond@thewesterlysun.com

@CynthiaDrummon4

See the article here:

Offshore sand could help replenish beaches - The Westerly Sun

Forbes

You Can't Have Offshore Wind Power Without Oil Forbes The Block Island Wind farm's launch late last year signified the United States' official entry into the offshore wind industry. And while European countries have been generating electricity by spinning turbines offshore since 1991, the US is eager to ... Regulators Updated on 1st US Offshore Wind Farm OperationsU.S. News & World Report OC offshore meteorological tower step toward wind farmDelmarva Daily Times all 9 news articles »

Visit link:

You Can't Have Offshore Wind Power Without Oil - Forbes

Once a scenario has been simulated, contractors can project the right cost, depreciation and value in an upcoming contract before the rig move process begins. Being able to see the impact of moving a rig from one company to another is a benefit of accurate forecasting you get from a single end-to-end, fully integrated solution. The ability to forecast in this manner saves time and money for drilling contractors, critical in the oil and gas industry - now more than ever.

Once a rig move has begun, drilling contractors require visibility over vast data sets - accounting currencies, work orders, maintenance transactions and more. During the move, management also need to monitor the environmental impact, cost of operations, support for quality assurance and health & safety management.

Unfortunately, many drilling contractors still struggle with their disjointed and unintegrated solutions. None of their existing systems are comprehensive or agile enough to fully map the diverse requirements, processes and extra transactions required on a rig during a move. By bringing together all these data streams into a single solution, drilling contractors can reap the benefits of analyzing large amounts of real-time information - presenting an accurate picture of events and enabling well-informed decision making during the move.

Having access to a rigs complete maintenance history in one solution enables traceability, but also guarantees compliance. The global oil and gas environment demands a solution which can quickly adapt to compliance regulations to reduce non-compliance risk. Rig move solutions must enable full visibility into IFRS, US GAAP and SOX compliance as well as efficient risk management and environmental impact. Because the United Nations Convention on the Law of the Sea has divided the sea into zones with different legal status and applicable law, and other rules may apply in territorial waters within 12 nautical miles of a coast, rigs crossing these jurisdictions may need to conform to different rules. Rig move must also take into account differing regulations for the asset itself, including the number of lifeboats, fire and gas detection systems, number of individuals allowed to sleep in a single cabin and other criteria.

From beginning to end, manual transactions pose significant risk to rig moves - causing inaccuracy, delays and spiralling costs. If a drilling contractor begins a rig move with fragmented systems, there is a risk the finance department will see an inaccurate picture of how the move has taken place.

Fragmented systems handling rig move processes may mean it takes the finance department months to recognize a rig has been moved to a new location. This lack of visibility and delay of information sharing significantly hinders operations, while backtracking to correct data creates unnecessary overhead costs. A solution lacking in integration may also result in rigs are moved from one locale to the next without being reconfigured to account for different regulatory regimes, placing the organization at risk of fines and recertification.

The right enterprise software can extract necessary data and then alert users of what objects need to be cancelled, closed and/or transferred from projects to conduct compliant and well-documented rig moves. This functionality enables a much more cohesive transfer of data, improves documentation for finance, optimizes processes and reduces error postings, manual corrections and overall transactions.

Real-time visibility, optimized solution processes and accurate forecasting bring real value to drilling contractors during mission-critical rig moves. These benefits directly contribute to industry efforts to reduce overheads and cut unnecessary costs.

For some organizations, adapting to the challenges of a rig move in the transforming oil and gas market may be intimidating. With the support of solutions designed to maximize operations, compliance and the bottom line, offshore drillers can make inefficient rig moves a thing of the past.

Patrick Zirnhelt is aVice President with heavy involvement in Enterprise Service & Asset Management at IFS North America.

Read this article:

Time For Change: Meeting The Challenge Of Offshore Rig Moves - Manufacturing.net (blog)