April 25, 2012 <\/p>\n
The center section of the backplane structure that will fly on NASAs James Webb Space Telescope has been completed, marking an important milestone in the telescopes hardware development. The backplane will support the telescopes beryllium mirrors, instruments, thermal control systems and other hardware throughout its mission. <\/p>\n
Completing the center section of the backplane is an important step in completing the sophisticated telescope structure, said Lee Feinberg, optical telescope element manager for the Webb telescope at NASAs Goddard Space Flight Center in Greenbelt, Md. This fabrication success is the result of innovative engineering dating back to the technology demonstration phase of the program. <\/p>\n
The center section, or primary mirror backplane support structure, will hold Webbs 18-segment, 21-foot-diameter primary mirror nearly motionless while the telescope peers into deep space. The center section is the first of the three sections of the backplane to be completed. <\/p>\n
Measuring approximately 24 by 12 feet yet weighing only 500 pounds, the center section of the backplane meets unprecedented thermal stability requirements. The backplane holds the alignment of the telescopes optics through the rigors of launch and over a wide range of operating temperatures, which reach as cold as 406 degrees Fahrenheit. During science operations, the backplane precisely keeps the 18 primary mirror segments in place, permitting the mirrors to form a single, pristine shape needed to take sharp images. <\/p>\n
The Northrop Grumman Corporation in Redondo Beach, Calif., and its teammate ATK in Magna, Utah, completed construction of the center section. Northrop Grumman is under contract to Goddard for the design and development of Webbs sunshield, telescope and spacecraft. ATK manufactured 1,781 composite parts of the center section using lightweight graphite materials and advanced manufacturing techniques. <\/p>\n
Successor to the Hubble Space Telescope, the Webb telescope is the worlds next-generation space observatory and will be the most powerful space telescope ever built. It will observe the most distant objects in the universe, provide images of the very first galaxies ever formed and study planets around distant stars. The Webb telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency. <\/p>\n<\/p>\n
Image 1: Artists concept of the James Webb Space Telescope in orbit. Credit: NASA <\/p>\n
Image 2: The center section of the James Webb Space Telescope flight backplane, or Primary Mirror Backplane Support Structure, at ATKs manufacturing facility in Magna, Utah. Credit: ATK <\/p>\n<\/p>\n
More: <\/p>\n
Webb Telescope Flight Backplane Section Completed<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" April 25, 2012 The center section of the backplane structure that will fly on NASAs James Webb Space Telescope has been completed, marking an important milestone in the telescopes hardware development. The backplane will support the telescopes beryllium mirrors, instruments, thermal control systems and other hardware throughout its mission Continue reading