July 14, 2017 Retroreflectors created in the lab of Andrei Faraon reflect light. Credit: Caltech <\/p>\n
A team of engineers at Caltech has discovered how to use computer-chip manufacturing technologies to create the kind of reflective materials that make safety vests, running shoes, and road signs appear shiny in the dark. <\/p>\n
Those materials owe their shininess to retroreflection, a property that allows them to bounce light directly back to its source from a wide variety of angles. In contrast, a basic flat mirror will not bounce light back to its source if that light is coming from any angle other than straight on. <\/p>\n
Retroreflectors' ability to return light to where it came from makes them useful for highlighting objects that need to be seen in dark conditions. For example, if light from a car's headlights shines on the safety vest of a construction worker down the road, the vest's retroreflective strips will bounce that light straight back to the car and into the driver's eyes, making the vest appear to glow. <\/p>\n
Retroreflectors have also been used in surveyors' equipment, communications with satellites, and even in experiments to measure the distance of the moon from Earth. <\/p>\n
Typically, retroreflectors consist of tiny glass spheres embedded in the surface of reflective paint or in small mirrors shaped like the inner corner of a cube. <\/p>\n
The new technologywhich was developed by a team led by Caltech's Andrei Faraon, assistant professor of applied physics and materials science in the Division of Engineering and Applied Scienceuses surfaces covered by a metamaterial consisting of millions of silicon pillars, each only a few hundred nanometers tall. By adjusting the size of the pillars and the spacing between them, Faraon can manipulate how the surface reflects, refracts, or transmits light. He has already shown that these materials can be tweaked to create flat lenses for focusing light or to create prism-like surfaces that spread the light out into its spectrum. Now, he's discovered that he can build a retroreflector by stacking two layers of the metamaterials atop one another. <\/p>\n
In this kind of retroreflector, light first passes through a transparent metamaterial layer (metasurface) and is focused by its tiny pillars onto a single spot on a reflective metamaterial layer. The reflective layer then bounces the light back to the transparent layer, which transmits the light back to its source. <\/p>\n
\"By placing multiple metasurfaces on top of each other, it is possible to control the flow of light in such a way that was not possible before,\" Faraon says. \"The functionality of a retroreflector cannot be achieved by using a single metasurface.\" <\/p>\n
Since Faraon's metamaterials are created using computer-chip manufacturing technologies, it would be possible to easily integrate them into chips used in optoelectronic deviceselectronics that use and control light, he says. <\/p>\n
\"This could have applications in communicating with remote sensors, drones, satellites, etc.,\" he adds. <\/p>\n
Faraon's research appears in a paper in the June 19, 2017, edition of Nature Photonics; the paper is titled \"Planar metasurface retroreflector.\" Other coauthors are Amir Arbabi, assistant professor of computer and electrical engineering at the University of Massachusetts Amherst; and Caltech electrical engineering graduate students Ehsan Arbabi, Yu Horie, and Seyedeh Mahsa Kamali. <\/p>\n
Explore further: System of flat optical lenses that can be easily mass-produced and integrated with image sensors <\/p>\n
More information: Amir Arbabi et al. Planar metasurface retroreflector, Nature Photonics (2017). DOI: 10.1038\/nphoton.2017.96<\/p>\n
Engineers at Caltech have developed a system of flat optical lenses that can be easily mass-produced and integrated with image sensors, paving the way for cheaper and lighter cameras in everything from cell phones to medical ... <\/p>\n
Scientists have created new 2-D nanostructured surfaces which appear as realistic 3-D objects including shading and shadows - using cutting edge nano-engineering. <\/p>\n
Caltech engineers have created flat devices capable of manipulating light in ways that are very difficult or impossible to achieve with conventional optical components. <\/p>\n
That bright, reflective coating used on road signs, bicycles and clothing are important safety measures at night. They help drivers get to their destinations while avoiding bicyclists and pedestrians in low-light conditions. ... <\/p>\n
Engineers at the University of California San Diego have developed a material that could reduce signal losses in photonic devices. The advance has the potential to boost the efficiency of various light-based technologies ... <\/p>\n
The thinnest, smoothest layer of silver that can survive air exposure has been laid down at the University of Michigan, and it could change the way touchscreens and flat or flexible displays are made. <\/p>\n
Throughout the universe, supersonic shock waves propel cosmic rays and supernova particles to velocities near the speed of light. The most high-energy of these astrophysical shocks occur too far outside the solar system to ... <\/p>\n
A team of engineers at Caltech has discovered how to use computer-chip manufacturing technologies to create the kind of reflective materials that make safety vests, running shoes, and road signs appear shiny in the dark. <\/p>\n
Nanoscale deformations could impact the high-precision experiments, such as the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO) <\/p>\n
Alzheimer's disease results from a dysfunctional stacking of protein molecules that form long fibers inside brain cells. Similar stacking occurs in sickle-cell anemia and mad cow disease. <\/p>\n
Researchers from the Theory Department of the MPSD have realized the control of thermal and electrical currents in nanoscale devices by means of quantum local observations. <\/p>\n
The rapidly developing science and technology of graphene and atomically-thin materials has taken another step forward with new research from The University of Manchester. <\/p>\n
Please sign in to add a comment. Registration is free, and takes less than a minute. Read more <\/p>\n
<\/p>\n
Read the original post: <\/p>\n
Computer chip technology repurposed for making reflective nanostructures - Phys.Org<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" July 14, 2017 Retroreflectors created in the lab of Andrei Faraon reflect light. Credit: Caltech A team of engineers at Caltech has discovered how to use computer-chip manufacturing technologies to create the kind of reflective materials that make safety vests, running shoes, and road signs appear shiny in the dark. Those materials owe their shininess to retroreflection, a property that allows them to bounce light directly back to its source from a wide variety of angles. Continue reading