Photo: IMEC Near Field Communicator: There are 1,700 transistors on the flexible chip in this NFC transmitter. <\/p>\n
At a meeting in midtown Manhattan, Kris Myny picks up what looks like an ordinary paper business card and, with little fanfare, holds it to his smartphone. The details of the card appear almost immediately on the screen inside a custom app. <\/p>\n
Its a simple demonstration, but Myny thinks it heralds an exciting future for flexible circuitry. In January, he began a five-year project at the nanoelectronics research institute Imec in Leuven, Belgium, to demonstrate that thin-film electronics has significant potential outside the realm of display electronics. In fact, he hopes that the project, funded with a 1.5 million grant from the European Research Council (ERC), could demonstrate that there is a path for the mass production of denser and denser flexible circuitsin other words, a Moores Law for bendable ICs. <\/p>\n
Five years ago, Myny and his colleagues reported that they had used organic thin-film transistors to build an 8-bit microprocessor on flexible plastic. In the years since, the group has turned its focus to IGZOa metal-oxide semiconductor that is a mixture of indium, gallium, zinc, and oxygen. Thin-film transistors based on this substance can move charge significantly faster than their organic counterparts do; at the same time the transistors can still be built at or around room temperaturean important requirement when attempting to fabricate electronics directly onto plastic and other materials that can be easily deformed or damaged by heat. <\/p>\n
To build that business card, Myny and his colleagues engineered a flexible chip containing more than 1,700thin-film IGZO transistors. What sets the chip apart from other efforts is its ability to comply with the ISO14443-A Near Field Communication (NFC) standard. For flexible circuitry, this is a demanding set of requirements, Myny says, as it requires logic gates that are fast enough to work with the 13.56-megahertz standard carrier frequency. <\/p>\n
Adding to the challenge is that while IGZO is an effective n-type semiconductor, allowing electrons to flow easily, it is not a particularly good p-type material; there is no comparable material that excels at permitting the flow of holesthe absence of electrons that are treated as positive charges. Todays logic uses both p- and n-type devices; the complementary pairing helps control power consumption by preventing the flow of current when transistors are not in the act of switching. With just n-type devices to work with, Myny and his colleagues have to devise a different kind of circuitry. <\/p>\n
With the ERC project, Imec aims to tackle a suite of interrelated problems in an effort to boost transistor density from 5,000 or so devices per square centimeter to 100,000. That figure isnt far from the density of thin-film transistors in conventional rigid-display backplanes today, Myny says. However, its another matter to try to achieve that density with digital logic circuitswhich require more complicated designsand to make sure those devices are reliable and consistent when theyre built on a delicate and irregular substrate. <\/p>\n
The group also wants to prove this density is achievable outside the lab, by adapting manufacturing techniques that are already in use in display fabs. Myny says that if he and his team hit their goals, a square centimeter of fast, flexible circuitry could be built at a cost of 1 U.S. cent (assuming high-volume manufacturing). At the same time, while the density of the circuits increases, the group will also have to boost the transistor frequency and drive down power consumption to prevent overheating. The overall goal, Myny says, is to demonstrate that you can indeed make flexible circuitsthat it is not science fiction but that it is going to market. <\/p>\n
When it comes to the fabrication of complex digital circuits on flexible substrates, Imec is in my opinion the biggest player, says Niko Mnzenrieder, a lecturer at the University of Sussex, in England, who specializes in flexible electronics. He notes that metal-oxide flexible circuitry is already starting to make commercial inroads, and he expects the first big applications to be in RFID and NFC technology. Its not a mature technology, he says, but its nearly ready for everyday use. <\/p>\n
<\/p>\n
Go here to read the rest:<\/p>\n
Plotting a Moore's Law for Flexible Electronics - IEEE Spectrum<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" Photo: IMEC Near Field Communicator: There are 1,700 transistors on the flexible chip in this NFC transmitter. At a meeting in midtown Manhattan, Kris Myny picks up what looks like an ordinary paper business card and, with little fanfare, holds it to his smartphone. Continue reading