Jason Rhian <\/p>\n
June 16th, 2017 <\/p>\n
Orbital ATK conducted a static test fire of the Launch Abort Motor that is planned for use on Lockheed Martins Orion spacecraft in Promontory, Utah on Thursday, June 15. Photo Credit: Jason Rhian \/ SpaceFlight Insider <\/p>\n
PROMONTORY, Utah With a brief flash of highly-controlled power, Dulles, Virginia-based Orbital ATK, along with NASA and Lockheed Martin successfully conducted a test of a system designed to increase safety and to save lives. <\/p>\n
The test was conducted at 100 Fahrenheit and will be followed by a test at 30 F in 2018. Photo Credit: Jason Rhian \/ SpaceFlight Insider <\/p>\n
We at Orbital ATK are very proud to work with NASA and Lockheed Martin on the Orion Launch Abort System, and to provide a motor that is so integral to astronaut safety, said Charlie Precourt, Vice President and General Manager of Orbital ATKs Propulsion Systems Division and former NASA astronaut via a company-issues release. The importance of our crews safety and well-being cant be stressed enough. <\/p>\n
The Launch Abort Motor, the primary motor of the Orion spacecrafts Launch Abort System (LAS) would pull Orions Command Module off of its Service Module and the Space Launch System (SLS) super heavy-lift booster that is currently being developed to send astronauts to deep space destinations, such as the Moon, asteroids and Mars. <\/p>\n
NASA and Orbital ATK carried out this test to qualify an array of elements that are a part of the Launch Abort Motors design. Some of these include, the thrust profile reduction or TPR grain design, to verify the motor-manifold joint and manifold-nozzle joint performance. This test also served to qualify the motor under high temperature limits (100 degrees Fahrenheit)and to distinguish abort motor induced environments. <\/p>\n
The test accomplished all of that in the scant five seconds that the motor was active for. <\/p>\n
Thursdays static test fire saw the Launch Abort Motor firmly attached to the test stand at Promontorys T-97 facility. During firing, the Launch Abort Motor exerted an estimated 400,000 pound of thrust in just an eighth of a second. The extreme capabilities that this system is capable of bringing to bear, is important given its role. <\/p>\n
In the event of an emergency, either at the pad at Kennedy Space Centers Launch Complex 39B in Florida, or on ascent, the Launch Abort Motorwouldgofrom zero to an estimated 400-500 miles per hour in just two seconds. With an acceleration greater than that of a drag racer, the Launch Abort Motor places some 10Gs on those on board pulling them from whatever had gone off-nominal. <\/p>\n
Given its abilities, it should come as little surprise that the Launch Abort Motor burns its solid fuel some 3-4 times faster than a typical motor of this size (according to a statement issued by Orbital ATK). <\/p>\n
The Launch Abort Motor measures approximately 17 feet in length and about three feet in diameter. <\/p>\n
While this Qualification Motor 1 (QM-1) test is viewed as a key milestone in allowing NASA to regain the ability to send astronauts beyond low-Earth orbit (LEO) it is not the systemsfirst test. In November of 2008, ATK (this test was conducted before Orbital Sciences Corporation and ATK had merged in 2014) conducted the ST-1 Static Test. This was followed by a Pad Abort Launch in May of 2010 and Exploration Flight Test 1 (EFT-1) in December of 2014 (on EFT-1 the Launch Abort Motor was inert). <\/p>\n
Lessons learned on ST-1, helped shape certain aspects of the Launch Abort Motors design as was noted by one member of the motors development team. <\/p>\n
Orbital ATKs Launch Abort Motor Program Director, Steve Sara, provided a detailed review of the test, as well as some of the modifications made to the design in preparation for its use on Orion. Photo Credit: Jason Rhian \/ SpaceFlight Insider <\/p>\n
There a few things that we learned on ST-1, one is that one of our acoustic gauges got saturated, so the acoustic loads were higher than we had anticipated, Steve Sara, Orbital ATKs Launch Abort Program Manager told SpaceFlight Insider. We also learned about these joints, the joints survived fine on ST-1, but that was a steel manifold, this is a titanium manifold. So we changed materials for the reason of weight savings. Years ago, even before ST-1, we decided to move to a lighter weight manifold so that we could save about 1,300 lbs (590 kilograms). <\/p>\n
If everything continues to go as currently planned, the Motors QM-2 test should take place late next year (2018). One member of NASAs astronaut corps, Rex Halheim, who was a part of the crew of the final flight of the Shuttle Program, STS-135, spoke with SpaceFlight Insider about what it was like to watch the test first hand. <\/p>\n
I was amazed at just how powerful it was, you expect it to be powerful but, you know, its quite a ways down the hill from us and you see those flames come up (laughs) and I was thinking, this is going to be loud when it gets to me and then BAM it hits you its pretty impressive, Walheim said. <\/p>\n
Walheimalsonoted thatthe importance of thetest simply could not be overstated, as it could one day save the lives who fly on SLS and Orion. <\/p>\n
We want to test all of the hardware at the ends of the extremes, especially this hardware which is a part of the essential Launch Abort System for us. Whenever you build a new rocket you try to take into account all of the things that could go wrong andhave ways to fix all the failures, but, you want to have something that can get you off the rocket if you have a really bad day and thats our launch abort system. Thats what this abort motor we tested today is for, it pulls us off the Space Launch System if we have a bad day and need to get off the pad or rocket. <\/p>\n
As Walheim noted, the test regimen is designed to validate the design under both the high and low end of what the Launch Abort Motor is expected to encounter. The next step is to test the design in lower temps (approximately 30 degrees Fahrenheit). <\/p>\n
Inabout 18 months, the three organizations are planning to conductthe QM-2 Launch Abort Motor (this will also take place in Utah), this will be followed by theAscent Abort-2 Flight Test (AA-2) currently slated to take place at Cape Canaveral Air Force Station, Florida, in 2019. <\/p>\n<\/p>\n
Tagged: Launch Abort Motor Lead Stories Lockheed-Martin NASA Orbital ATK Orion Promontory Space Launch System Utah <\/p>\n
Jason Rhian spent several years honing his skills with internships at NASA, the National Space Society and other organizations. He has provided content for outlets such as: Aviation Week & Space Technology, Space.com, The Mars Society and Universe Today. <\/p>\n
<\/p>\n
View original post here:<\/p>\n
Five Seconds of Fury: Orbital ATK conducts test fire of Launch Abort Motor - SpaceFlight Insider<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" Jason Rhian June 16th, 2017 Orbital ATK conducted a static test fire of the Launch Abort Motor that is planned for use on Lockheed Martins Orion spacecraft in Promontory, Utah on Thursday, June 15. Photo Credit: Jason Rhian \/ SpaceFlight Insider PROMONTORY, Utah With a brief flash of highly-controlled power, Dulles, Virginia-based Orbital ATK, along with NASA and Lockheed Martin successfully conducted a test of a system designed to increase safety and to save lives. The test was conducted at 100 Fahrenheit and will be followed by a test at 30 F in 2018 Continue reading