June 14, 2017 by Lisa Zyga feature Illustration of the reconfigurable device with three buried gates, which can be used to create n- or p-type regions in a single semiconductor flake. Credit: Dhakras et al. 2017 IOP Publishing Ltd <\/p>\n
In the semiconductor industry, there is currently one main strategy for improving the speed and efficiency of devices: scale down the device dimensions in order to fit more transistors onto a computer chip, in accordance with Moore's law. However, the number of transistors on a computer chip cannot exponentially increase forever, and this is motivating researchers to look for other ways to improve semiconductor technologies. <\/p>\n
In a new study published in Nanotechnology, a team of researchers at SUNY-Polytechnic Institute in Albany, New York, has suggested that combining multiple functions in a single semiconductor device can improve device functionality and reduce fabrication complexity, thereby providing an alternative to scaling down the device's dimensions as the only method to improve functionality. <\/p>\n
To demonstrate, the researchers designed and fabricated a reconfigurable device that can morph into three fundamental semiconductor devices: a p-n diode (which functions as a rectifier, for converting alternating current to direct current), a MOSFET (for switching), and a bipolar junction transistor (or BJT, for current amplification). <\/p>\n
\"We are able to demonstrate the three most important semiconductor devices (p-n diode, MOSFET, and BJT) using a single reconfigurable device,\" coauthor Ji Ung Lee at the SUNY-Polytechnic Institute told Phys.org. \"While these devices can be fabricated individually in modern semiconductor fabrication facilities, often requiring complex integration schemes if they are to be combined, we can form a single device that can perform the functions of all three devices.\" <\/p>\n
The multifunctional device is made of two-dimensional tungsten diselenide (WSe2), a recently discovered transition metal dichalcogenide semiconductor. This class of materials is promising for electronics applications because the bandgap is tunable by controlling the thickness, and it is a direct bandgap in single layer form. The bandgap is one of the advantages of 2D transition metal dichalcogenides over graphene, which has zero bandgap. <\/p>\n
In order to integrate multiple functions into a single device, the researchers developed a new doping technique. Since WSe2 is such a new material, until now there has been a lack of doping techniques. Through doping, the researchers could realize properties such as ambipolar conduction, which is the ability to conduct both electrons and holes under different conditions. The doping technique also means that all three of the functionalities are surface-conducting devices, which offers a single, straightforward way of evaluating their performance. <\/p>\n
\"Instead of using traditional semiconductor fabrication techniques that can only form fixed devices, we use gates to dope,\" Lee said. \"These gates can dynamically change which carriers (electrons or holes) flow through the semiconductor. This ability to change allows the reconfigurable device to perform multiple functions. <\/p>\n
\"In addition to implementing these devices, the reconfigurable device can potentially implement certain logic functions more compactly and efficiently. This is because adding gates, as we have done, can save overall area and enable more efficient computing.\" <\/p>\n
In the future, the researchers plan to further investigate the applications of these multifunctional devices. <\/p>\n
\"We hope to build complex computer circuits with fewer device elements than those using the current semiconductor fabrication process,\" Lee said. \"This will demonstrate the scalability of our device for the post-CMOS era.\" <\/p>\n
Explore further: Team engineers oxide semiconductor just single atom thick <\/p>\n
More information: Prathamesh Dhakras, Pratik Agnihotri, and Ji Ung Lee. \"Three fundamental devices in one: a reconfigurable multifunctional device in two-dimensional WSe2.\" Nanotechnology. DOI: 10.1088\/1361-6528\/aa7350<\/p>\n
Journal reference: Nanotechnology <\/p>\n
2017 Phys.org<\/p>\n
A new study, affiliated with UNIST has introduced a novel method for fabrication of world's thinnest oxide semiconductor that is just one atom thick. This may open up new possibilities for thin, transparent, and flexible ... <\/p>\n
(PhysOrg.com) -- Most of todays electronics devices contain two different types of field-effect transistors (FETs): n-type (which use electrons as the charge carrier) and p-type (which use holes). Generally, a transistor ... <\/p>\n
(Phys.org)Although vacuum tubes were the basic components of early electronic devices, by the 1970s they were almost entirely replaced by semiconductor transistors. But in the past few years, researchers have been developing ... <\/p>\n
Combining silicon with a light-producing semiconductor may help develop micrometer-scale lasers, shows Doris Keh-Ting Ng and her colleagues from the A*STAR Data Storage Institute. <\/p>\n
A team of researchers from Purdue University, SEMATECH and SUNY College of Nanoscale Science and Engineeringwill present at the 2014 Symposium on VLSI Technology on their work involving high-performance molybdenum disulfide ... <\/p>\n
Researchers at the Energy Department's National Renewable Energy Laboratory (NREL) have uncovered a way to overcome a principal obstacle in using two-dimensional (2D) semiconductors in electronic and optoelectronic devices. <\/p>\n
In the semiconductor industry, there is currently one main strategy for improving the speed and efficiency of devices: scale down the device dimensions in order to fit more transistors onto a computer chip, in accordance ... <\/p>\n
Carbon is one of the most versatile elements: it forms the basis for an enormous number of chemical compounds, it has several allotropes of different dimensionality, and it exhibits many different bonding geometries. For ... <\/p>\n
Flexible electronic parts could significantly improve medical implants. However, electroconductive gold atoms do not easily bind to silicones. Researchers from the University of Basel have now modified short-chain silicones ... <\/p>\n
The news story made a big splash: in January 2016 ETH researchers Professor Raffaele Mezzenga and his senior researcher Sreenath Bolisetty published a study in the journal Nature Nanotechnology about an innovative type of ... <\/p>\n
In many ways, magnets are still mysterious. They get their (often powerful) effects from the microscopic interactions of individual electrons, and from the interplay between their collective behavior at different scales. ... <\/p>\n
Queen's University Belfast researchers have discovered a new way to create extremely thin electrically conducting sheets, which could revolutionise the tiny electronic devices that control everything from smart phones to ... <\/p>\n
Adjust slider to filter visible comments by rank <\/p>\n
Display comments: newest first <\/p>\n
What's next? <\/p>\n
Maybe the construct of intent. The how and why influence enlists underlying capabilities.<\/p>\n
Nope. Moore's law isn't about speed or efficiency, but about the number of transistors at the lowest price point per transistor. Scaling down doesn't necessarily bring cost advantges, so simply fitting more transistors per square inch doesn't follow Moore's law. <\/p>\n
Again they get it wrong. <\/p>\n
Not sure I see the point of this. In situations where Moore's law matters (high density memory\/processor logic), one generally has massive arrays of the same kind of component and they are usually dedicated, not programmable. If these things could productively do useful things simultaneously, that would be something, but they are one function at a time. Perhaps one could make some sort of Read Only Memory\/FLASH-like memory out of them by programming locations to be a transistor or diode, but there's unlikely to be a density gain by doing that. This could be a significant advance in programmable arrays, but I don't see it helping much for conventional memory and logic. <\/p>\n
Please sign in to add a comment. Registration is free, and takes less than a minute. Read more <\/p>\n
<\/p>\n
Go here to see the original: <\/p>\n
3-in-1 device offers alternative to Moore's law - Phys.Org<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" June 14, 2017 by Lisa Zyga feature Illustration of the reconfigurable device with three buried gates, which can be used to create n- or p-type regions in a single semiconductor flake. Continue reading