Gif: Nature Nanotechnology <\/p>\n
Researchers at IBM Research Alamaden have developed a new approach to measuring the magnetic field of individual atoms that for the first time gives scientists the ability to put the sensor exactly next to the atom they want to measure, providing them with a strong and direct signal of the magnetic field.The energy resolution that the new technologyprovides is more than 1000 times higher than other microscopic techniques, according to its inventors. <\/p>\n
The technique involves purposely placing a \"sensor\" atomnear thetargetatom to measure the latters magnetic field. These sensor atomsalso known as electron spin resonance (ESR) sensorswere first developed by IBM back in 2015 and are used inside of scanning tunneling microscopes (STMs). STMswhich detect the tunneling of electrons between the an ultra-sharp probe as its scanned across a surfaceallow atom-by-atom engineering, so that the positions of both the sensor and the target atoms can be imaged to locate them with atomic precision. <\/p>\n
This latest advance in STMs with ESR technology described in the journal Nature Nanotechnology marks a distinct change from how the magnetic fields of atoms have previously been measured. <\/p>\n
We have shown in the paper how to perform a kind of nano-GPSimaging, to detect where other magnetic atoms were located purely by the spin resonance signal on several fixed sensor atoms, says Christopher Lutz, a staff scientist at IBM Research Almaden. We intend to use this to image where magnetic centers are in molecules and nanostructures on the surface. <\/p>\n
Prior to this latest work, one of the most notable techniques for measuring the magnetic fields of atoms involved exploiting defects in diamondcalled nitrogen-vacancy (NV) centerswhich can measure the magnetic fields from individual atoms within the diamond crystal. <\/p>\n
But with that approach the NV center location is random; it cannot be moved around within the diamond crystal, according to Lutz. He further notes that while the diamond containing the NV can be moved near another object to image it magnetically it is presently limited to about 10 nanometers distance, because it is hard to get an NV center with usable properties close enough to the diamond surface. <\/p>\n
Lutz also points out that there had been earlier work at IBM in measuring the magnetic field of atoms in which they demonstrated it was possible to detect a weak magnetic force from an individual atom. However, the signals were very challenging to detect, he says.The signal from the new STM technique is much stronger and more robust. We can sense the magnetic field of other atoms directly, which gives clear measure of their magnetic moments and other magnetic properties. <\/p>\n
This additional information on the magnetic properties of atoms complements the other kinds of information that regular STMs give, like the location of atoms on a surface and their tunneling spectrathe conductance as a function of the voltage. (The lattergives information on the an atoms electronic structure.) According to Lutz, this means an energy resolution that is 1000 times as sensitive as other microscopic techniques, making it possible to see weak interactions. <\/p>\n
This allows weak interaction like magnetic coupling between well-separated atoms to be measured, he says. It can probe structures non-invasively, from several nanometers away, where they are undisturbed by our probe atom. <\/p>\n
The operating principle of these ESR sensors depends on what happens when an atom with unpaired electron spins is placed in a magnetic field. It does something called precess, which means its axis rotates around the magnetic field at a precise frequency. This frequency depends on the field strength and the atom's magnetic moment, which is the strength of the atom's magnetism. <\/p>\n
In our experiment, we apply a magnetic field to the microscope, and then apply a high-frequency voltage to the tunnel junction of the microscope, explains Lutz. When the frequency matches the frequency of the spin precession, it drives the spin away from its thermal equilibrium, in which it is mostly aligned with the magnetic field. <\/p>\n
This change in orientation is detected bytransferring a single magnetic sensor atom, in this case iron, to the microscope tip.The frequency is swept through the resonance frequency, and a sharp change in tunnel current appears precisely at the resonant frequency. The resonancefrequency moves in response to nearby magnetic atoms. <\/p>\n
The physical principle is the same as for magnetic resonance imagingexcept that we detect electron precession instead of nuclear precession, and we address individual atoms instead of billions of them, by positioning the tip over the atom of interest, adds Lutz. <\/p>\n
The technical hurdles in achieving these measurements are pretty high. First, high-frequency cabling is needed to bring gigahertz signals to the STM tip in order to drive the atom's spin resonantly. Meanwhile,the STM itself must be maintained in an ultra-high vacuum, at liquid helium temperatures, and in an applied magnetic field of just the right magnitude. <\/p>\n
We remain the only group able to perform single-atom ESR in an STM, saysLutz. However, we are studying ways to relax the stringent conditions needed to make it work, in order to make this a more general technique and so other groups can make use of it. <\/p>\n
Lutz expects that a few other research groups will be able to perform thismeasurement once they installa gigahertz connection in their STM. <\/p>\n
We hope to achieve spin resonance on a wider variety of atom types and surface materials, and to relax the extreme conditions needed for this experiment, so that in time more labs can use it, he says. <\/p>\n
IEEE Spectrums nanotechnology blog, featuring news and analysis about the development, applications, and future of science and technology at the nanoscale. <\/p>\n
Physical phenomena from light absorption to separation of charge are now open to better observation28Sep2010 <\/p>\n<\/p>\n
Replacing high-voltage power source with nanogenerators increases sensitivity to new records 27Feb <\/p>\n<\/p>\n
First borophene-based heterostructure should guide future work with borophene in nanoelectronic applications 23Feb <\/p>\n<\/p>\n
Remembering IEEE Medal of Honor recipient widely revered for contributions to nanotechnology, women in science 22Feb <\/p>\n<\/p>\n
MEMS and a new measurement mode shrink AFM technology down to chip scale, creating a much wider market 21Feb <\/p>\n<\/p>\n
Nanoprobe could improve study of diseases such as Parkinson's and Alzheimer's 17Feb <\/p>\n<\/p>\n
CMOS-based array could test drugs better by recording from within each cell to map an entire network 13Feb <\/p>\n<\/p>\n
Experimental proof of predictive law of physics could help engineers better manage heat in microprocessors 6Feb <\/p>\n<\/p>\n
Most sensitive uncooled graphene-based thermal detector yet fabricated 3Feb <\/p>\n<\/p>\n
Biocompatibile inks open up medical devices for inkjet-printed devices 2Feb <\/p>\n<\/p>\n
Novel process moves nanomaterials from smaller transistors to smaller packaging 26Jan <\/p>\n<\/p>\n
An analyst's report says Nantero appears poised to cash in on its quixotic journey to bring carbon nanotube-based nonvolatile memory to market 23Jan <\/p>\n<\/p>\n
Carbon-nanotube-based FETs can operate faster and at a lower supply voltage than their silicon-based counterparts 19Jan <\/p>\n<\/p>\n
Super-thin graphene-based health monitor could have wide range of benefits 11Jan <\/p>\n<\/p>\n
Silver nanowire-based inks provide high conductivity at low temperatures, making them available to inexpensive substrates 5Jan <\/p>\n<\/p>\n
Breakthrough could be a boon for next-generation MRAM 28Dec2016 <\/p>\n<\/p>\n
Diamondoids build smallest possible copper-sulfur nanowires, could construct many other nanomaterials 26Dec2016 <\/p>\n<\/p>\n
New technology offers early and easy detection of circulating tumor cells 16Dec2016 <\/p>\n<\/p>\n
In the future, this technology could lead to clock rates 1,000 times as fast as conventional electronics 15Dec2016 <\/p>\n<\/p>\n
Novel approach could enable various electronics from sensors to displays on packaging 9Dec2016 <\/p>\n
<\/p>\n
See original here: <\/p>\n
New Microscopy Tech Offers a Kind of Nano-GPS for Measuring Magnetism of Atoms - IEEE Spectrum<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" Gif: Nature Nanotechnology Researchers at IBM Research Alamaden have developed a new approach to measuring the magnetic field of individual atoms that for the first time gives scientists the ability to put the sensor exactly next to the atom they want to measure, providing them with a strong and direct signal of the magnetic field.The energy resolution that the new technologyprovides is more than 1000 times higher than other microscopic techniques, according to its inventors. The technique involves purposely placing a \"sensor\" atomnear thetargetatom to measure the latters magnetic field. These sensor atomsalso known as electron spin resonance (ESR) sensorswere first developed by IBM back in 2015 and are used inside of scanning tunneling microscopes (STMs). Continue reading