For immediate release: DriTac Flooring Products has introduced DriTac Eco-DriBloc Premium \"Green\" Moisture Control and Adhesive Isolation Membrane for resilient flooring installations. <\/p>\n
A fast drying, single-component concrete moisture control system and adhesive isolation membrane, Eco-DriBloc allows installers to apply a moisture mitigation system and install their resilient floor on the same day with only a 3-hour dry time. This roller applied, easy-to-use 2-in-1 product offers a zero VOC, zero solvent and low odor formula that also serves to isolate old adhesive residue, including cutback. <\/p>\n
Manufactured in the USA, Eco-DriBloc is warranted for up to 15 lbs. of concrete moisture vapor transmission, per the ASTM F1869 Calcium Chloride Test Method and up to 90% RH, per the ASTM 2170 Relative Humidity Test. Eco-DriBloc is for use with DriTac resilient water-based flooring adhesives and available in 1 and 4-gallon pails. <\/p>\n
Eco-DriBloc is for use under most types of resilient floor coverings, including luxury vinyl tile\/plank, fiberglass back sheet vinyl, carpet tile, VCT, cork tile, cork\/rubber\/foam underlayments, laminate flooring and all other floating floors. This innovative eco-friendly product is used over porous concrete to help reduce penetration of the adhesive and dusting of the concrete, which results in increased spread rates and a stronger bond with DriTac resilient water-based floor covering adhesives. <\/p>\n
DriTac Flooring Products, LLC is celebrating over 59 years as one of the oldest and most experienced manufacturers of environmentally friendly flooring adhesives in the market. DriTac's innovative and high-tech product line is available through more than 100 distributors and flooring outlets nationwide. For more information, or to receive a complete product guide for all DriTac adhesives and installation products for wood and resilient flooring, contact: John Lio, 60 Webro Road Clifton, N.J. 07012; Ph: 800-394-9310 ext. 243; e-mail: jlio@DriTac.com<\/a>; or Web: http:\/\/www.DriTac.com<\/a>. <\/p>\n <\/p>\n Read the original post:<\/p>\n Moisture Barrier suits resilient flooring installations.<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" For immediate release: DriTac Flooring Products has introduced DriTac Eco-DriBloc Premium \"Green\" Moisture Control and Adhesive Isolation Membrane for resilient flooring installations. A fast drying, single-component concrete moisture control system and adhesive isolation membrane, Eco-DriBloc allows installers to apply a moisture mitigation system and install their resilient floor on the same day with only a 3-hour dry time. This roller applied, easy-to-use 2-in-1 product offers a zero VOC, zero solvent and low odor formula that also serves to isolate old adhesive residue, including cutback. Continue reading