Inertia steers Int-Ball drone through International Space Station – Electronics Weekly

Instead, thrust comes from an internal fan and steering is through three reaction wheels the latter classic satellite technology.

Inside is one of two exquisitely-engineered (see this and this video) self-contained 3d inertial orientation control modules both aimed at general-purpose use in space-craft, drones and even as self-propelled rolling cube ground robots.

The 100mm cube weighs 1.34 kg including a wireless communicator and a battery and includes six MEMS inertial sensors and three brushless DC motors driving three orthogonal rotating wheels as reaction masses (see image).

The sensors are mounted on the modules vertexes to improve attitude estimation accuracy, Hall sensors in the motors also feed-back rotational speed and each wheel has an electromagnetic brake. The brakes can generate 2.1Nm of torque, reducing wheel speed from 6000rpm to zero within 100ms, including demagnetization time.

Also in the module is a wireless tranceiver for telemetry and commands, and the lithium polymer battery.

A smaller inertial unit has 31mm reaction wheels and squeezes these, a guidance control computer and 6-axes of inertial sensing inside a 50g mass budget. Exploration of microgravity asteroids is a potential use for this one, said JAXA.

A video describing both of the inertial steering modules can be viewed here

Int-Ball, short for JEM Internal Ball Camera, was delivered to the Kibo Japanese Experiment Module by a Dragon spacecraft in early June.

Many of its parts were 3d-printed.

See the article here:

Inertia steers Int-Ball drone through International Space Station - Electronics Weekly

Related Posts

Comments are closed.