Tuskegee University has made significant contributions to the U.S. aerospace industry, and that influence is poised to grow.
Since it started in 1983, the schools Aerospace Science Engineering Departmenthas produced more than 200 graduates who are working across the nation.
In the last five years, enrollment in the program has been increasing, and a new plane manufacturing projectplanned for the region is expected to bring even more prominence to this program.
Global aerospace and defense firm Leonardo plans to assemble its T-100 jet trainerat Tuskegees Moton Field, if it wins a U.S. Air Force competition to supply the next-generation aircraft.
The project would create 750 high-wage, full-time jobs over a 10-year period starting in 2019, and total investment is estimated at up to $250 million. Moton Field is where the legendary Tuskegee Airmen, the first African-American military pilots, trained during World War II.
Climbing enrollment
The implications for Tuskegee students and faculty are exciting, said Dr. M. Javed Khan, a professor of aerospace science engineering who has taught at Tuskegee since 2000 and was appointed head of the department in 2011.
The number of undergraduate students in the department has increased from 75 to about 140 the last five years.
The numbers have really ratcheted up, Khan said. There was a time when we used to graduate five or six a year. This 2017 academic year, the department graduated 21 African-American aerospace engineers.
We have been really growing recently. Weve done a better job of marketing the program, and weve added activities that have sparked interest, such as a rocket competition, an Unmanned Aerial Systems (UAS) design-build-fly program and a zero gravity program.
Tuskegee is the first and only historically black institution of higher learning to offer an accredited Bachelor of Science degree program in this field.
Our graduates are working at all the big aerospace companies, and there are also many graduates who go into the military, NASA, the FAA and other agencies, Khan said. We contribute very substantially to the workforce and to the diversity of it.
Industry connections
Alabamas thriving aerospace industry has benefited the program.
One of the biggest advantages of having industry in the area is that some of our students are involved in some of the engineering hands-on activities/projects. In addition, students get internships, and after graduation, many of them are recruited by these companies, Khan said.
Theres also a big advantage for our students to go and visit and get an understanding of how the industry works. We also invite people from industry to provide professional talks to our students.
The Leonardo project could be a great addition to the internship and work opportunities available to Tuskegee students, he said.
It would be a great asset to us in that we could always invite the experts in the facility there to come and talk to students, and students could go there to see all the different parts of the airplane and the different stages and processes of assembly, he said. For us, its going to be a great learning opportunity.
Faculty at Tuskegees Aerospace Science Engineering Department also could benefit by being involved in different research opportunities related to Leonardos work, Khan added.
Aircraft design
Khan, who received his undergraduate degree in aerospace science engineering from the Pakistan Air Force College of Aeronautical Engineering, is also personally excited about the project, because of his own background in aircraft design.
Prior to joining Tuskegee, he served in the Pakistan Air Force and attained the rank of brigadier general. While in the PAF, he served as head of the Aerospace Engineering Department at his alma mater and chief of engineering of the largest operational base. He also was responsible for the F-16 fleet, among other aircraft.
In addition, Khan was the deputy chief project director (aerospace) of the joint Sino-Pakistan military aircraft development program, the JF-17. In this capacity, he led the design and development contractual negotiations andconducted the Air Staff Requirements verifications, conceptual design and preliminary design reviews. He also supported the financial reviews.
Leonardos plan for Moton Field is very exciting because it brings back a lot of memories, he said.
Khan received his masters degree in aeronautical engineering from the U.S. Air Force Institute of Technology and his Ph.D. in aerospace engineering from Texas A&M University.
He is a Fellow of the Institution of Engineers (Pakistan), a Fellow of the Royal Aeronautical Society (U.K.) and an Associate Fellow of the American Institute of Aeronautics and Astronautics. His research interests include vortex-dominated flows, aircraft design and engineering education, and he has received more than $2 million in research grants from organizations including the National Science Foundation and NASA.
Rich legacy
Greg Canfield, secretary of the Alabama Department of Commerce, said Tuskegee has a rich legacy when it comes to aerospace and aviation, and the region is in line to make an even greater impact.
From the preeminence of Tuskegees Aerospace Science Engineering Department to Leonardos plans to build world-class training aircraft at Moton Field, all of the pieces are in place to influence the industry for generations, much like the courageous Tuskegee Airmen did for the military many years ago, he said.
Khan said the success of the Tuskegee students and faculty are part of the Airmens legacy.
Just as they were facing a challenge in the second World War, and were very successful, here we are in the 21st century, meeting the challenge of staying on the cutting edge of technology, he said.
This story originally appeared on the Alabama Department of Commerces Made in Alabama website.
See the original post:
Tuskegee University aerospace engineering program ascends with industry - Alabama NewsCenter
- why can't i print in the message area? - November 7th, 2009 [November 7th, 2009]
- smoke detectors - November 7th, 2009 [November 7th, 2009]
- Insulation drawings - November 7th, 2009 [November 7th, 2009]
- Boiler. - November 7th, 2009 [November 7th, 2009]
- Electrical Harmonics - November 7th, 2009 [November 7th, 2009]
- axial thrust - November 7th, 2009 [November 7th, 2009]
- Pl inform which make suitable for this specification - November 7th, 2009 [November 7th, 2009]
- CapsLock - November 7th, 2009 [November 7th, 2009]
- How to Calculate Drag Reduction Factor for surge analysis - November 7th, 2009 [November 7th, 2009]
- cable..pls help - November 7th, 2009 [November 7th, 2009]
- 11Kv joints - November 7th, 2009 [November 7th, 2009]
- how to calculate required torque? - November 7th, 2009 [November 7th, 2009]
- IP rating for enclosures - November 7th, 2009 [November 7th, 2009]
- 11kv JOINTS SPACING ON PARALLEL CABLES - November 7th, 2009 [November 7th, 2009]
- beep sounds - November 7th, 2009 [November 7th, 2009]
- Increse speed of pneumatic cylinder - November 7th, 2009 [November 7th, 2009]
- Pipe fittings-Manufacturing/Quality Assurance - November 7th, 2009 [November 7th, 2009]
- kango memolition hammer - November 7th, 2009 [November 7th, 2009]
- Loss calculation in undergound Transmission Cables - November 7th, 2009 [November 7th, 2009]
- Design in ASP.NET - November 7th, 2009 [November 7th, 2009]
- axial pump - November 7th, 2009 [November 7th, 2009]
- Auger bit - November 7th, 2009 [November 7th, 2009]
- Pipe - November 7th, 2009 [November 7th, 2009]
- Centrifugal oil filter ideas - November 7th, 2009 [November 7th, 2009]
- When to install Horizontal Condensate Pot (Probably also called Spun Type) ?? - November 7th, 2009 [November 7th, 2009]
- Confusion about a Resistance Bulb - November 7th, 2009 [November 7th, 2009]
- Loop testing for a NON-HART 4 wire instrument - November 7th, 2009 [November 7th, 2009]
- My VAWT Project, next phase - November 7th, 2009 [November 7th, 2009]
- voltage doubler - November 7th, 2009 [November 7th, 2009]
- How to build corners and joints using Red Oak timbers? - November 7th, 2009 [November 7th, 2009]
- THERMAL OIL BOILER - November 7th, 2009 [November 7th, 2009]
- How Do You Get a Degree in Green Energy? - November 7th, 2009 [November 7th, 2009]
- deareator pegging - November 7th, 2009 [November 7th, 2009]
- 99 ford ranger with no brake pedal at all - November 7th, 2009 [November 7th, 2009]
- CAD tool for electronic circuitry design - November 7th, 2009 [November 7th, 2009]
- hvac - November 7th, 2009 [November 7th, 2009]
- Unfinalized video miniDVD data recovery - November 7th, 2009 [November 7th, 2009]
- eletronics - November 7th, 2009 [November 7th, 2009]
- codless phones programming - November 7th, 2009 [November 7th, 2009]
- Effectiveness in cooling a drink with ice than water? - November 7th, 2009 [November 7th, 2009]
- Free Vibration Analysis of Tapered Composite Wings - November 8th, 2009 [November 8th, 2009]
- Can You Treat Composite Beams or Wings Mathematically like Isotropic Wings? - November 8th, 2009 [November 8th, 2009]
- Particle, Particle in Space, Tell Me About Earthquakes - November 8th, 2009 [November 8th, 2009]
- Russian Rocket Engine – Best in the World - November 8th, 2009 [November 8th, 2009]
- New Online Evaluation of Laminated Composite Stiffnesses - November 8th, 2009 [November 8th, 2009]
- 'Autonomous' helicopters teach themselves to fly - November 8th, 2009 [November 8th, 2009]
- Next Target – Jupiter - November 8th, 2009 [November 8th, 2009]
- NASA's FERMI, Space, and Time - November 8th, 2009 [November 8th, 2009]
- Lunchtime Salon Today in L.A. - November 8th, 2009 [November 8th, 2009]
- A vote for McCain is a vote against science - November 8th, 2009 [November 8th, 2009]
- NASA Study Investigates Mental Overload in Pilots - November 8th, 2009 [November 8th, 2009]
- NASA Releases Columbia Crew Safety Report - November 8th, 2009 [November 8th, 2009]
- What the Stimulus Package Means for Science - November 8th, 2009 [November 8th, 2009]
- All Scientists Have Conflicts of Interest (Duh) - November 8th, 2009 [November 8th, 2009]
- Congress Considers Killing Open-Access Journals - November 8th, 2009 [November 8th, 2009]
- Transmission Swing Angle - December 12th, 2009 [December 12th, 2009]
- Long Weld Neck Flanges - December 12th, 2009 [December 12th, 2009]
- Super Critical Fluid Extraction for Rose Oil - December 12th, 2009 [December 12th, 2009]
- Capacitor Bank Calculations - December 12th, 2009 [December 12th, 2009]
- Power Supplies and Dummy Loads - December 12th, 2009 [December 12th, 2009]
- Standards for Piping Vibration - December 12th, 2009 [December 12th, 2009]
- Automatic Generator Changovers - December 12th, 2009 [December 12th, 2009]
- Synchronous Generators - December 12th, 2009 [December 12th, 2009]
- Suzuki Swift Brakes - Squeaks and Whistles - December 12th, 2009 [December 12th, 2009]
- Flange Serration - December 12th, 2009 [December 12th, 2009]
- Hydraulic Shapes and Reciprocating Machines - December 12th, 2009 [December 12th, 2009]
- No Shortage of Engineers After All! - December 12th, 2009 [December 12th, 2009]
- Delta Starter Diagram - December 12th, 2009 [December 12th, 2009]
- 2002 Chevy Duramax Diesel - Low Voltmeter Reading - December 12th, 2009 [December 12th, 2009]
- Energy Survey and Consumer Mapping Methodoogy - December 12th, 2009 [December 12th, 2009]
- Setback for Geothermal Energy - December 12th, 2009 [December 12th, 2009]
- Darlington Amplifier - December 12th, 2009 [December 12th, 2009]
- Diesel Storage Tank Design - December 12th, 2009 [December 12th, 2009]
- Car MPG Questions - December 12th, 2009 [December 12th, 2009]
- Dark LCD Display - December 12th, 2009 [December 12th, 2009]
- Calculating the Strength of Concrete Floors - December 12th, 2009 [December 12th, 2009]
- Hitachi Projection TV - December 12th, 2009 [December 12th, 2009]
- WW II Water-Injected Engines - December 12th, 2009 [December 12th, 2009]
- Soap to Prevent A1H1N1 Contamination - December 12th, 2009 [December 12th, 2009]
- Car won't shift out of first gear - December 12th, 2009 [December 12th, 2009]